Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Suggestions for contract references?

Posts

Suggestions for contract references?

#1

Suggestions for contract references?

James Watriss

I'm a furniture builder with a few years experience, but it's all been handshake deals to date.

Finally found a lead into a more upscale neighborhood. Simple enough job, partially built in, but nothing more complicated than a few cleats screwed through the plaster into the studs.

Client wants a 'real' contract. I'm all for the idea, but haven't done so before.

Any suggestions for online resources, before this one gets away from me?

Re: Suggestions for contract references?

#2

Re: Suggestions for contract references?

Carol Reed, Strawberry, AZ

Not to discourage you, but it is better to make an informed decision.

I had product liability insurance but I was not a licensed contractor. My insurance did not cover damage to walls, etc. For myself I learned quickly to let installation to the ones licensed and insured for such things. I worked with contractors with regard to hanging and mounting systems and preparations before the walls were closed up.

So for what it is worth, look into the insuring issues. Contracts are to protect both parties by eliminating assumptions. Also, your insurance policy can help you word your contract correctly. Here is one area where DIY is not the best idea. If you want to pursue work in this area then get started off on the right foot.

Also look into bonding. When working in another's home or business and that ladder your brought in knocks over a lamp, you will be glad you are bonded. Somehow, that lamp becomes a rare and irreplaceable treasure.

I remember one job where the 20' cross that was being hung by the contractor and his crew slipped and nearly fell to the floor. It would have damaged far more than the walls! Those boys sweated before things got right again. The next time the contractor trusted I knew what needed to be done. And I was never happier that it was them and not me.

Re: Suggestions for contract references?

#3

Re: Suggestions for contract references?

FredD

James,

For what it is worth , if your in the States of Washington or California and the job requires any alteration whatsoever to the structure of the home and that includes cutting holes in the wall , you have to be a licensed General Contractor or hold a specialty license , which would be a Cabinet Makers license in this case or you are running the risk of doing a free job if the client complains to the Registrar of Contractors .

In addition to that you get to pay to have the job done over by a Licensed entity and fined by the State.

Since many States follow California's lead in Consumer protection law , ask if the state your in mandates a particular Contract form printed by the state , California does.

Since I was in business many years talking to prospective clients , the request from you client for a relatively small job would have me asking if he had any experience bad or otherwise dealing with craft people.

Lots of luck , it may be a fine job and no problem , but it pays to find out first.

FredD

Re: Suggestions for contract references?

#4

Re: Suggestions for contract references?

Robin Corell in Atascadero CA

Thats a whole lot of miss information in one short post. In California the maximum fine for first time offenders is $1000 for contracting without a licence and there is no provision for paying a licenced contractor to redo the job. There is also no requirement to have a contracotors licence to touch anything perment to a house. However there is a maximum of $500 you can charge for a combined materials and labor before you are legaly required to have a contractors licence. There is a 'loop hole' if you will, a home owner can act as general contractor and as such they can hire help as they see fit. a homeowner/contractor is responsible for insureing any help they hire.

In case you have thought ahead and figured that you will charge for the cabinets on one invoice/contract and install them under a second one that is a no no and the total is added together.

That all said Carols advise was very good and very wise.

Robin

Re: Suggestions for contract references?

#5

More to it than that

Neal in San Jose

Back when I was a legal, insured, licensed contractor, I knew a man that was none of the above. Sort of a "handy man", but a very good one. Several of my peers and I tried unsuccessfully to talk him into sitting for the test and becoming legal; he didn't.

He did a small job that required moving a washing machine to repair some sheet rock. The laundry room was on the second floor of the house (hey, it's California). Unknown to him or the homeowner, the drain line from the washing machine became disconnecetd from the house drain. After Mr. Handyman had finished, Mrs. homeowner put in a load of laundry and left the house to run some errands. The resulting flood ruined approx. $50K of carpet, hardwood, furniture, etc. No problem, right? Wrong. The homeowner's insurance covered it, but insurance companies are not in the business of losing money. They made Mr. and Mrs homewoner right, then came after Mr. Handyman with all barrels loaded. He lost his house. Then he had to deal with the State. That's about when I lost contact with him, but I bet it wasn't pretty.

Now that I'm not licensed or insured anymore, I don't do any work for anybody!

Cover your assets!

Re: Suggestions for contract references?

#6

Jesper, Denmark

Re: Bling, bling, bling, bling.......

Jesper, Denmark

Alarm bells ringing!

You have to ask yourself why? and what kind of contract?

A real contract can simply be a written statement of what is to be done and how much and when it will be paid for. Yau can also call it a summary of agreement. It clearly states what you agreed and that is Ok.

On the other hand, you have to ask yourself why? Is the client looking for an ascape or has he had bad experiences with previous jobs?

In the end, it comes down to people and how reasonable and honest they are - no matte how much paper is generated. If you suspect his motives, drop it and let somebody else take the fall.

Re: Suggestions for contract references?

#7

Where

Mark Mandell - Gone Round In Jersey

are you located, James?

Re: Suggestions for contract references?

#8

Re: Suggestions for contract references?

FredD

With all due respect Robin you are incorrect and obviously unknowledgeable about rules and regs governing General Contracting on the West Coast , particularly in California.

I have for instance testified in two Administrative Law cases governing how liable the defendant was in damaging the Plaintiffs home in one case and in the other , did the plaintiff receive what he paid for.

In both cases , one defendant was a General Contractor duly licensed and bonded who did not deliver the agreed upon level of workmanship and material and was required to pay the Contractor who was engaged to remedy the problem and also had his license suspended for thirty days.

The other was a slam dunk case for the State for a unlicensed person installing Water Heaters illegally and without permits and not anywhere near code requirements.

He went into Bankruptcy to avoid responsibility for his misguided actions.

What Neal wrote is the real world out there and not observing the possible consequences though ignorance and or being a dedicated scofflaw is not a good way to make a living.

FredD