Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

OT Air Rifle *LINK*

Posts

Re: OT Air Rifle *LINK*

#2

Re: OT Air Rifle

Larry in NW OHIO

Very interesting Mike. I don`t remember that ever being in the history books. Larry

Re: OT Air Rifle *LINK*

#3

Re: OT Air Rifle

John Lucas

Cool I just ordered a Remington single shot to take care of my bird problem. A good repeater would have worked better but they are CO2 and I didn't want to be burdened with that.

Re: OT Air Rifle *LINK*

#4

Re: How did they generate air pressure?

Henry (Raleigh, NC)

I'm not up on the history of technology, but at that point with a traveling band, how would Lewis and Clark generate the (up to) 800 psi compressed air to recharge the cylinder? Interesting History lesson, but it leaves this 'technologist' wondering. No CO2 cartridges available from the paint ball store.

Henry

Re: OT Air Rifle *LINK*

#5

I believe the man said ..

Mike Farinella

with a bicycle pump type device.

Re: OT Air Rifle *LINK*

#6

Re: I believe the man said ..

Larry in NW OHIO

I was thinking the same thing and I remembered that he mentioned the bicycle pump, but then I thought did they have pneumatic tires at that time. If so would they have had seals in the pumps that would be able to seal good enough to pump something up to 800+ pounds. Larry

Re: OT Air Rifle *LINK*

#7

Re: OT Air Rifle

Mike Rubes, Apex, NC

Mike,

Awesome! I am a huge L&C fan but had never seen the rifle. Or in this case, at least a good replica. Truly one of most fascinating events in the history of our country.

Thanks for sharing the link!

Another Mike

Heading out to play in warm Apex, NC!!

Re: OT Air Rifle *LINK*

#8

Here's a link to the pump  *LINK*

John Lucas


http://www.topairgun.com/girandoni

Re: OT Air Rifle *LINK*

#9

There is another

Dan Donaldson

video on youtube about the way it was done. A couple of interesting things (assuming that the video is correct) are that it was a hand pump that required about 1500 strokes to fill the tank. They never let anyone they were showing it to know that. The other thing is that they had no pressure gauge, so the pump was designed to go to 800 psi and no higher. It was not shown how this was accomplished.