We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I have a Delta Rockwell 4" jointer exactly like the one you pictured. I keep it near my bandsaw and use it to clean up edges and narrow faces of stock that I have cut on the band saw. It's size makes it convenient for use with smaller stock.
Tommy That is exactly like the one my father had for as long as I can remember it. For $100 and if it is in good shape it may be worth it. I don`t know what they go for. It all depends on how badly you want a baby for your bigger one. It would be good to feed short stock. They made very good machines back then. If you buy it , I may have blades for it, if you would want them they be yours. I`m not sure but I may have a set of carbide for it, I would have to look them up, if I still have them. Larry
I would sure like those blades. I have one just like it had it for 25 years and works great. My blades are getting worn down pretty bad from many sharpenings. I'm in Nebraska. Thanks Russ
I've got one with 6" knives and it is heavy as heck. Never needs adjustment, but the chips go everywhere. There is no provision for dust collection and if you keep the pieces under 36" it works great.
These were, at one time, the standard jointer size in a lot of home shops, even those of advanced amateurs. They're obviously not very useful for long work or face jointing; but they were a lot less expensive than the larger ones.
You can get quite a bit of edge jointing done with one of these, for work up to about four feet long.
Interesting dynamic over the years: a "small" jointer is now 6", just as a "small" motorcycle is 600cc or so, the size that, when I was riding (back when you had to stay alert for dinosaurs on the road), was considered a serious touring bike.
(Yet truly small, by American standards, cars - in sizes that would have been, and were, laughed at in my youth - are all over the place on the road. And, of course, anything electronic is so small you have to worry about dropping your $1,000 electronic wonder down the bathroom drain. I'm confused.)
A few years ago people thought it cool to run with a Boom box perched on their should. Now ts the I-pod nano or whatever that's the size of a matchbox. Remember the race to the tiny cell phone? Great big men talking on a cell phone they should have been holding with tweezers. Now they are getting huge again to accommodate the screen. Soon we will see people running with an I-pad perched on their shoulder. They will look like the geeks of my day that had a slide rule hanging from their belt.
I have the 6" long bed version of that jointer and still use it every day. The fence works well. I wish I had a spiral head in it.
Russ I`ll look around and see if I can find them, it`s been years since I saw them last and I cleand up a couple of times since also. If I can`t, you can make them, this is what I did for these. Just use blades from a bigger jointer or planer and cut them down and balance them. Larry
If it isn't mine it sure is a close relative, the only difference is that mine was missing the metal stand when my father purchased it and it now has a wooden stand with a removable chip bin. It is a good jointer as both the in feed and out feed table heights are adjustable with hand cranks and can be locked in position. We added a strip of metal from the pivot to the end of the pork chop guard so that it moves out of the way more easily. Not the adjustable stops for the fence tilt that can be dialed in for perfect angles.
Assuming you got the extra cash and room in the shop, buy it. You may find a handy use for it. If not, stick it in a corner until some person visiting you starting out in woodworking is lusting for a jointer. I did the very same thing with a 7/8 hp router( purchased used $35), I've been repaid several time over and have a friend for life.
I`m sorry Russ and Tommy, I`ve looked around a little and cannot find the blades. I must have tossed them the last time I cleaned up. That`s the story of my life, I`m kind of a pack rat, I`ll save things that I think I may use in the future and it`ll set around for quite awhile, then all of a sudden I`ll throw something away and a few days later I could have used it. Then also sometimes I`ll buy a new one and when I get home I`ll get out of the truck and trip over the old one I was lookikng for. Never fails. Maybe I`ll go buy a new set. Larry