Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Faux Cherry Finish

Posts

Faux Cherry Finish

#1

Faux Cherry Finish

Keith Inscho

I have a friend who has a large furniture store variety TV cabinet with a very broken base table. She has requested that I build her a new base, which is no problem, but I told her that matching the faux cherry finish would be tough to match. Any suggestions on finish choices?

Re: Faux Cherry Finish

#2

Tough one...

doug f, san clemente, ca

Keith - that's a tough request, but I've had some luck with a gel stain by General Finishes (Cherry something, I can't remember the exact name.) With a clear finish over it, it came out pretty well; not an exact match, but pretty close.

Definitely play with some scrap first and keep track of the steps you use so when you find a good match, you can duplicate it.

Just a thought; is she dead set on a matching base or could it be a contrasting color. That would make your life a lot easier.

Good Luck with your project.

Doug

Re: Faux Cherry Finish

#3

If you have the broken parts,

Keith Newton----Little Rock, Arkansas

then take that along with a sample of the wood which you have chosen to replicate the parts to the paint store. A good paint store should have someone who can formulate the recipes for a good match.

Re: Faux Cherry Finish

#4

What kind of wood?

Ray - Middletown, IN

That will determine your finishing schedule. It could be a stain or a combination of dyes and stains to get your match. I've had good success matching poplar to cherry. I had Sherwin-Williams mix some custom stain for me, but then my cousin works there and has an uncanny ability to match colors.

Ray

Re: Faux Cherry Finish

#5

Re: What kind of wood?

Keith Inscho

I was kind of leaning towards Poplar as a wood choice. Unfortunately the original base has already been trashed so I don't have access to a sample. I could remove one of the doors even though they are fairly large, but I don't know if the paint store would be able to use it. She did point out that the details had been left darker on the original, so she wouldn't mind if it was slightly darker. That will give a little lee way anyway.

Re: Faux Cherry Finish

#6

Re: What kind of wood?

Joanne in Point Pleasant

I made a base for a tv years ago out of poplar and used Bartley's Gel Stain--Pennsylvania Cherry. I think I used amber shellac on top to warm it up a little. If you want it redder, use a clearer coat than amber.

Re: Faux Cherry Finish

#7

Gel Stain

Thomas Skaggs, Foothills of Mount Level

It's hard to replicate factory finishes sometimes but I have had similar luck as Joanne with gel stain. I find it more workable for building color.

Tom

Re: Faux Cherry Finish

#8

Re: Faux Cherry Finish

Joe Mohnike

My brother in law had to match a color on his house, and did not have any left over paint. The Dummy took a picture of the color he wanted to match, printed it and took it to the paint store. They matched the color perfect, he has a Nikon camera and an HP printer. Why couldn't I be so lucky.

Good Luck

Joe M.

Re: Faux Cherry Finish

#9

Re: Faux Cherry Finish

Keith Inscho

With the right lighting that could work. Thanks everyone. Gives me a direction.

Re: Faux Cherry Finish

#10

Re: Faux Cherry Finish

Steve Schoene

Gel stain may well be part of the solution, but in many cases it's a good idea to start with getting the basic coloration (perhaps on the light side to allow for darkening from subsequent steps) set with a dye, and then tweak the colors with the pigmented stain. If there are details that need to be shaded then also think about using a glaze base and add the necessary pigment so you can let some hang up on the details.