Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Counter Top Poured!

Posts

Counter Top Poured!

#1

Counter Top Poured! 

Jennifer Indy.USA

Well the concrete is poured! We actually poured it on Wednesday after that nasty ice storm. Everything went perfectly. On Monday we picked up a pneumatic concrete vibrator from Ray Thompson and he had another little one that came out of a Lazy-Boy chair (that he found at a garage sale for .50 cents) so we borrowed that one too. Both worked like a charm. Thanks Ray! The day before, Clay measured out all of the ingredients and weighed them out exactly according to a concrete book that we have called �Concrete Countertops: Design, Form, and Finishes for the New Kitchen and Bath�. We used pea gravel, sand and Portland cement. We mixed outside the shop and then brought pails of it inside to the form. We mounted the pneumatic vibrator underneath the mold and occasionally moved it from end to end and to the middle of the form. The other little one that came out of the Lazy-Boy chair was electric and I just moved it around of the edges and underneath and inside the sink cut out. The bubbles worked their way out really well with these. Much better than any other method we had tried. So the counter top sits in the shop for probably a week and then we�ll take the form off and carefully turn it over. Let it sit for about 4 weeks to cure and then we�ll haul it outside for polishing with diamond grinder discs and water. The cabinets you see in the background are the ones that will hold this countertop up. We�ll be glad to have the shop back. This thing and the cabinets takes up a lot of real estate in there!

Thanks again Ray for the vibrators. They helped a ton!

Thanks for looking,

Jen










Re: Counter Top Poured!

#2

Re: Counter Top Poured!

Larry in NW OHIO

Jenn For the amount you thanked Ray for the vibrators, that ,I would guess, is the weight of your counters. So when you move and turn them BEEE veeerrry careful so noone hurts anything. Also so it does not break. That is going to be one nice counter. Larry

Re: Counter Top Poured!

#3

Re: Counter Top Poured!

Randy Johnson

Mixing concrete outside last Wednesday must have been fun.

Our office was closed due to the weather, and since it was my week to pull standby for emergency service I was the only serviceman available. I got in eighteen hours of overtime, and all but two calls were to thaw out frozen regulators on gas meters.

You were working with concrete that day. Wow.

I hope the weather is better five weeks from now when the top goes outside for polishing.

Were you concerned about losing power in the middle of everything? Down here there were some people who didn�t have any for over three days.

Re: Counter Top Poured!

#4

Re: Counter Top Poured!

Alan in Little Washington (NC)

Do the concrete countertop books recommend any special curing process? The cement in concrete gains its strength during curing by the growth and interlocking of little crystalline fibers which requires moisture. "Drying" stops this process.

Years ago when I was building a ferro-cement boat (55' sailing ketch), to achieve the best cure and maximum strength we covered the (usually inverted) hull with burlap, draped soaker hoses over it, covered it with plastic sheet and kept it wet for 30 days! An alternative that resulted in about 90+% of the strength was to tent the boat in plastic and use a steam generator or two to keep it at 170+ degrees for 24 hours.

Re: Counter Top Poured!

#5

Re: Counter Top Poured!

Jennifer Indy.USA

Alan, in the book they say that covering the countertop with plastic or misting it can cause more problems than it would help. Water and moisture can weep down into the mold under the concrete and cause stains making for more grinding and polishing afterward, and for those that are tinted can cause color changes. The book says that they don't cover any of the tops they build unless they are working outside in arid and windy conditions. Even when they are in these conditions they just build a tarp tent to mostly block the wind off of it. The length of time that the top stays in the mold depends mostly on what type of cement you've used Type I, II or III. Allowing the concrete to dry somewhat rapidly is actually a benefit in countertops because it allows water and moisture to migrate away from the bottom of the mold which will be the finished side of the piece and thus making less opportunity for stains and blemishes and therefor less polishing and grinding. They say that not covering the piece probably allows a little water to evaporate more rapidly but in most conditions too slowly to cause problems. Ours is in a heated shop but we've kept it about 53-56 degrees. We're banking on them knowing what they wrote in this book. Ha! :)

Jen

Re: Counter Top Poured!

#6

Re: Counter Top Poured!

Jennifer Indy.USA

Hey Randy,

Well I guess we just figured if the power didn't go out by noon on Wednesday it wasn't going to. I know there was a lot of people without juice for several days here. We just got lucky. Early that morning I heard a big BANG and said oh, no there goes a transformer, but the lights stayed on and the ceiling fans kept going. Somebody lost power.

Jen

Re: Counter Top Poured!

#7

Re: Counter Top Poured!

Jennifer Indy.USA

Larry we have countertop lifters waiting in the wings :)

Believe me, had we not had those form jiggling devices we would never have gotten the bubbles out like we did. Those little things do a big job!

Jen

Re: Counter Top Poured!

#8

Vibrators - I love the midwest resourcefulness

Tim Greif - West of Chicago

I love the concrete vibrators. Only in middle America would you see people being creative enough to use storage bin outlet vibrators and little electric recliner muscle vibrators as concrete vibrators. I worked my way through college as a laborer on a commercial concrete crew and used many a concrete vibrator. But none as interesting as the ones you guys came up with.

I salute you and Ray for coming up with that. Good luck on the finished counter. Should be beautiful.

Re: Counter Top Poured!

#9

Re: Counter Top Poured!

Alan in Little Washington (NC)

It probably doesn't need to have too much strength anyway, unless you have a big overhang. The hulls on the boats we were building, despite having lateral and longitudinal 1/4" rebar and mesh throughout, were only 3/4" thick, so the cement was more susceptible to drying than a thick slab would be.

Re: Counter Top Poured!

#10

Re: Vibrators - midwest resourcefulness

Mark Mandell - Gone Round In Jersey

When in grad school (Indiana), I got several "Magic Fingers" units to use doing concrete sculpture casting. Those were the deals that were popular in some hotels in the 60's. They had a coin operated timer hooked to a vibrator box that attached to a bed's box springs. We called'em "5 minutes of fun for a quarter." Strapped to the outside of a mold, they worked great for getting the mix air out of the poured crete for excellent surface registration on the plaster waste molds. Usually 10 minutes (2 quarters' worth) was enough.

Re: Counter Top Poured!

#11

It Had To Be Cold

George Colonel's Workshop-Havertown PA

Good Afternoon Jen,

I am really suffering this winter's cold. I look at your countertop, and other aspparatus and marvel what will go on in warmert weather. Your snow looks just like my own stuff. Great work, and inventive.

George

Re: Counter Top Poured!

#12

Re: Vibrators - I love the midwest resourcefulness

Jennifer Indy.USA

Tim, believe it or not the round one that we mounted up underneath the form is actually for concrete work. When Ray said he had one we could borrow I figured it would be some big thing that would shake the heck out of the form, but this little pneumatic concrete vibrator did the trick. I hand it to Ray for grabbing that little one at the garage sale. I love a good garage sale but I think that might have been something I'd leave sitting on the table...even if it was only .50 cents! It worked nearly as well as the other one.

Jen

Re: Counter Top Poured!

#13

Re: It Had To Be Cold

Jennifer Indy.USA

George I'm looking forward to mixing up a big, warm pot of stew in the new kitchen. Or maybe a good strong batch of beer? Either one will be nice!

:)

Re: Counter Top Poured!

#14

Hmmmm,  I have a cement mixer just

Ray - Middletown, IN

like that one, or at least I did. Better go look under the lean-to. Glad everything worked out. On the day you move it I will probably have a bad cold, (hack, cough, sniffle).

Ray

Re: Counter Top Poured!

#15

Exciting Progress !

Don Orr

Looking forward to final reveal. Nice work.

Re: Counter Top Poured!

#16

Re: Counter Top Poured!

Chuck in Mtl.

Did you have to glue the blocks to the bottom of the mold to keep them from moving while pouring the concrete? Did you use anything to increase the pour-ability?

Re: Counter Top Poured!

#17

Re: Vibrators - I love the midwest resourcefulness

FredD

I am glad to see your Kitchen coming along well Jennifer , that was a major source of income in my work life .

One Caveat to all of you who anticipate pouring concrete , doesn't matter if it is a slab or a countertop, if you vibrate mix and this is generally done if you can't satisfactorily settle the mix by tapping the form, you must be care to not overdo the vibrating which is easy to do , to much and the sand will separate from the aggregate and give you a very weak mix, but you may know this already. ;-))

FredD

Re: Counter Top Poured!

#18

Re: Counter Top Poured!

Jennifer Indy.USA

Chuck yes we used silicone caulk to "glue" the stone pieces to the form to keep them from floating up. As far as pour-ability, the concrete was mixed as the book requested. We filled buckets and just plopped instead of actually pour. We squished the mix in and mushed it around the stones to make sure we didn't haven't any gaps. Then filled the rest of the mold.

Jen

Re: Counter Top Poured!

#19

Re: Hmmmm,  I have a cement mixer just

Jennifer Indy.USA

Ray, and here we thought we were the only ones with one of these beauties.

I've got your number Ray. we'll call ya if we need some help. I think we'll be okay between my brothers and my strapping 18 year old. We'll flip that thing like a pancake :)

Jen