Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Recent project completed

Posts

Re: Recent project completed

#26

question on the hole filling

Bill Tindall

First off, nice design and especially nice color. I would work maple more if I could ever get it to look this nice. It would seem that I need to gain experience with dye stains if maple is involved.

When I have used filler I have been able to match the color of the surface at the time of filling. However, the wood continues to change color and the fillers typically don't. Hence, where ever possible I use some sort of wood patch/plug when I can, which is often complicated and/or tedious.

Have you had any experience with this problem or how to deal with it, namely the wood and filler aging to different colors/shades?

Re: Recent project completed

#27

Ellis Walentine

Matching anticipated color

Ellis Walentine

I don't use filler any more than I need to either, Bill, and when I do, I most often touch it up after it dries, using assorted pigments in lacquer or shellac. That way, I can essentially paint all the characteristics of the adjacent grain, including color and texture. My choice of color depends on what I expect the wood to look like in a year or two. Most woods darken somewhat, cherry and mahogany being good examples, while others change hue, like walnut; so I try to anticipate those changes when retouching.

In this case, since maple doesn't change dramatically with age (it gets yellower), and since I was using stains on it, all I cared about was whether the stained filler matched the stained wood around it, which this filler did.

Ellis