Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

OT - Shopmade vacuum prefilter?

Posts

OT - Shopmade vacuum prefilter?

#1

OT - Shopmade vacuum prefilter?

Jesse Cloud

I've got an ancient Red Devil canister vac that's used inside the house. The 'prefilter' is a round shaped bit of woven plastic stuff about 1/4 inch thick. The wife complains that it is next to impossible to clean anymore. I checked Red Devil's website and the prefilter is "no longer available".

Has anyone ever fashioned their own replacement filter? Could I maybe just cut a piece of scotchbrite (similar weave) to fit?

Hope you can help. I think the wife has her eyes on my shopvac :\ .

Re: OT - Shopmade vacuum prefilter?

#2

JL

It just cost $1 to try

JL

I would try using white.

Re: OT - Shopmade vacuum prefilter?

#3

Re: OT - Shopmade vacuum prefilter?

Tom Dunlap

Spray the filter with Endust or something to improve its dust grabbing.

Re: OT - Shopmade vacuum prefilter?

#4

Dale Lenz

I spray my shop filter...

Dale Lenz

20" box fan with furnance filter with some light cooking oil and improves the dust uptake. In your case might make the house smell like your cooking(?), don't notice any smell in the shop while I'm sanding.

Re: OT - Shopmade vacuum prefilter?

#5

Re: OT - Shopmade vacuum prefilter?

Bill Houghton, Sebastopol, CA

I wonder if you could buy a furnace filter and cut as many layers from it as you need to replace the filter? If you hit the right sale, they can be pretty cheap.

Re: OT - Shopmade vacuum prefilter?

#6

Re: OT - Shop Made vacuum prefilter?

Barry Irby

I have a roll of industrial filter material. It was made to be a "wall" of filter and its about a 1/4" thick of some sort of cotton or polyester batting and a mess on one side. If you would like some I will send you a piece for the price of the postage. Not sure its sturdy enough for what you want.

You might also try looking for an industrial filter suppler and ask them for help and maybe a scrap.

Re: OT - Shopmade vacuum prefilter?

#7

Re: OT - Shopmade vacuum prefilter?

John Veerkamp

Polyester quilt batting is cheap . but at any fabric or craft store. Cut to fit with scissors. It comes in various thicknesses. Choose your poison.

Re: OT - Shopmade vacuum prefilter?

#8

Re: OT - Shopmade vacuum prefilter?

Larry in NW OHIO

Jesse Could you post a picture of what you have? Larry

Re: OT - Shopmade vacuum prefilter?

#9

Thanks!

Jesse Cloud

Thanks all. This is a great site. I'm pretty sure I have some furnace filters and some polyester batting in the shop as well as a white scotchbrite. I'll bet at least one of those will work!

Thanks Barry for the offer, I'll get back to you if the others don't pan out.

Re: OT - Shopmade vacuum prefilter?

#10

Ellis Walentine

How about...

Ellis Walentine

... a piece of panty hose stretched across the inlet to keep the larger chips or particles out? I'm not visualizing what this pre-filter is supposed to do.

Ellis

Re: OT - Shopmade vacuum prefilter?

#11

This is when my grandmother's principle works out

Bill Houghton, Sebastopol, CA

her principle being, "Never throw anything away. It might come in handy."

I've had to unlearn that principle because my shop is too small, but I gotta tell you, it was a struggle.