Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

22/32" plywood is the new 23/32"

Posts

22/32" plywood is the new 23/32"

#1

22/32" plywood is the new 23/32"

David Wittner

A belated happy Thanksgiving to all.

Maybe I missed something since I haven't bought a sheet of 3/4" (23/32") tongue and grove plywood in a year. Went to the orange big box yesterday to get the final supplies for a tree house I'm building. Since I had a sheet of 23/32 T&G in the rack I was just going to get one more. As I'm looking at the stuff I'm thinking that it's mismarked or something because it's too thin. I get the guy from the contractor's desk and he says that what I'm looking at is 23/32 plywood. He pulls out a tape measure to show me and I show him that it's not the right thickness. He reassures me that it is, I buy it and head home.

This afternoon I pulled out the old sheet and the new one and checked both with a metal rule. Old sheet, 23/32; new sheet, 22/32 (11/16). Are the manufacturers cutting back again or is this a screw up?

DGW

Re: 22/32" plywood is the new 23/32"

#2

Coming soon to a Borg near you . . .

Henry Higginbotham

Virtual plywood!

Forward 20 years. You visit the Borg online (or whatever it is we'll do in 20 years), make your payment, and get a code to download a nice picture of some circa 1970 AC fir. Shut up--be happy.

I just came from the blue box. I was looking for 1/4" lauan to cover the wall insulation behind some 8'-high shelves. Didn't see any. Mr. Blue Box came over to help and pointed to some suspiciously thin stuff that appeared to be birch veneer. "That's our lauan--best you can get anywhere," he said. I replied that while it was kind of pretty, it didn't look much like lauan, except for maybe the core. He assured me it was. The "official" price sign identified it as 5mm, but the store had relabeled it as 1/4". Shut up--be happy!

We were not amused (or happy), but we brought it home anyway. Options are few around here, especially on Sunday afternoon.

Re: 22/32" plywood is the new 23/32"

#3

Moses Yoder

Re: 22/32" plywood is the new 23/32"

Moses Yoder

My understanding is that each veneer goes through a sanding process before lamination and then the whole sheet goes through a sander after it is glued together. The softness of the wood varys, thus the thickness will vary. No two batches of plywood are exactly the same thickness due to the variation in the wood used for the plys. In our kitchen cabinet manufacturing process we have developed a method so taht this does not actually affect the size of the cabinets.

Re: 22/32" plywood is the new 23/32"

#4

Re: 22/32" plywood is the new 23/32"

Steve Schoene

If the problem were merely manufacturing differences, it would be equally likely to get sheets over size as undersize. Do you actually see that?

Re: 22/32" plywood is the new 23/32"

#5

Just like...

John in NM

The 2x4's I bought last year that were 1 3/8 x 3 7/16.... stay away from Stimson, some are the correct nominal size, some are smaller. When at one of the box stores I buy 10' 2x4's in our local supply chain those are all Canfor products which have much better quality control than Stimson seems to.

Its all about shaving a few more pennies to help the bottom line. Give an accountant a big wet sloppy kiss... or something :D