Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

old miter box

Posts

old miter box

#1

old miter box

cathy

I just got a big old miter box, Montgomery Wards but it's identical to a Stanley 246, and I wonder about the numbers on the 'dial'. Supposedly the 24 setting is for something that has 24 sides. The question is, what would they need to make, regularly, that has 24 sides (or 12, or 5) and why was that more a important setting than the actual measurement of the angle, like 45 or 30 degrees? Sorry to bother. This is apparently so basic that everyone but me knows, and that's why I can't find this out anywhere. Thanks. Hope you can help.

Re: old miter box

#2

Re: old miter box

Fred Davis

I imagine that stating the number of sides is much easier for those that have trouble with computing the angle, why is that a problem?

Re: old miter box

#3

JL

Re: old miter box  *LINK*

JL


Stanley Miter box instructions

Re: old miter box

#4

Re: old miter box

cathy

Hi, Fred. It's not a problem, I'm just accustomed to think in degrees or ratios of rise/run. I wondered what they routinely made that had 24 or 5 sides and why they used that particular calibration. Thanks for answering so quickly. My first guess was rafter cutting angles, since I supposed that might be a common use for angles, but then I found the old instructions and I couldn't figure why they used the 'sides' reference instead.

Re: old miter box

#5

Re: old miter box

Bill Houghton, Sebastopol, CA

I think probably very few people know anymore, actually.

I don't know this, but suspect that the "sides" increments were, as Fred Davis says, to avoid having to compute the angles. Math anxiety is NOT a new phenomenon.

As to the 24 sides - nothing springs immediately to mind, that's for sure. Even making a 24-sided rough layout for a round picture frame is pushing it; the round frames I've seen have had 6-8 pieces of stock glued around the circle, max.

Re: old miter box

#6

Re: old miter box

wilbur

The interior angle of a 24-sided polygon is 165 degrees. This isn't real useful until you realize that the exterior angle is 15 degrees. My bet is that the 24 setting was really an easy way to get a 15 degree cut.

Also, rather than making a 24-sided polygon, maybe the 15 degree sections were used to make a sunburst pattern, with the 15 degree angles aligned next to each other.

Re: old miter box

#7

You mean an icosikaiterhedron?

Neal in San Jose

I can't say it, either.

What you have to remember is that you are talking about Stanley Tools, a company not noted for its' logic. A #5 jack plane is 14 inches long, approx., a 5 1/2 is a little longer, but a 5 1/4 is a little shorter. A #9 plane is a miter plane, but a 9 1/2 is a small block plane. Marketing was a stronger suit for them; they attempted to convince everyone that by removing metal from the bottom of a plane (corrugating), they reduced the effort required to move it across a board. Any freshman physics student knows that is not correct. So, even tho it may be useless, they could brag about being able to cut a 24 sided figure.

Advertisers don't do that anymore, do they?

Re: old miter box

#8

Re: old miter box

Fred Davis

Hmm, "thinking in rise and run ratios' now there is Woman meamt to be a Carpenter, take it from a old one ;-))

FredD

Re: old miter box

#9

Re: old miter box

Don Evans

wonder if it had anything to do woth stave making, for barrels etc?

really don't have a clue for sure.

Don

Re: old miter box

#10

Re: old miter box

cathy

Hmmmmmm...They wouldn't have put 24 pieces in a wagon wheel rim? They were still making them then, right? I guess I'll have to keep obsessing. If I have to ask, I don't deserve such a fine tool. Maybe they just put it on there like they put the 'safety feature' on my car that locks me out if I get out with the motor on, just to make it seem more advanced.

It's a fine aparatus anyway, and I'm having fun with the bells and whistles. I've found a couple of other mysterious and amazing thingies and I'm on a mission to figure them out, too. I thank you for your help. I hate to see old information fade into oblivion. What did we do without the internet to post all these old manuals?

Thanks for the help. I didn't expect such prompt results.

Re: old miter box

#11

You can't be serious

Bill Houghton, Sebastopol, CA

"If I have to ask, I don't deserve such a fine tool."

Of course you do. The good metal miter boxes are so much finer than the alternatives that every hand tool worker should have one (except maybe Stephen Shepherd and Adam Cherubini, who might find them a bit anachronistic). With my Millers-Falls box, I can slice a sawkerf's thickness of wood off the end of a piece of stock, and yours probably can do the same.

And, as with just about every tool, you may never use all the features of this box; doesn't mean it's not great for the features you use.

Re: old miter box

#12

Re: You can't be serious

cathy

I have an older and simpler one and I do love that about it, that I can slice a tiny bit off if I measure badly. The feature I love about the 'fancy' one is that I can set it to stop at a certain depth of cut. It has a stop thingie that will allow me to cut pieces of the same length without measuring, but I mostly use the saw for longer pieces of moulding, so I can't see using that, however cool it is. If I understood the numbers, I'd probably love that part, too, but...as long as it has a 45 degree, at least I can use it. And I love an excuse to use it. The old tools were beautiful weren't they?

Re: old miter box

#13

Re: You can't be serious

Bill Houghton, Sebastopol, CA

I remember looking in an old price list, and the miter boxes were significantly more expensive than the metal-bodied planes - three-four weeks' worth of pay. I guess the carpenters/woodworkers of the period respected them enough to pay that kind of price for them, because there are enough around even today.

Re: old miter box

#14

Before chop saws...

John in NM

I bet I would have paid a pretty hefty price for one :D

No idea why they'd index on numbers, but I did look up a pdf of the instructions, and it did say the numbers were for cutting objects with that number of sides (paraphrasing here). Doesn't seem like an innovation to me, kind of like tape measures with little tiny fractions painted on....

I suspect the only reason they went to 24 is that they could rather than there being some kind of regular 15 degree cut that was often done. Closest I can imagine to a regular use is cutting molding and paneling in one of those Victorian turret rooms. Seems easier to divide a curved wall into small flats when paneling as its easier than making the curved panels and molding.

Re: old miter box

#15

Found it ! . . .

steve mackay

KNEW I'd seen it some where ! I think you're looking at 24 "sides" or 81 degrees. Its used to make a circle. Granted, there might be some shapeing and a LOT of sanding involved but its the angle, under 90, that will make the most even number of peices of equal length closest to a circle.

(or do I need to check my meds ?)

Re: old miter box

#16

Darrell in Oakville

I know this...

Darrell in Oakville

and I am surprised nobody else mentioned it.

The 24 setting isn't for a 24-sided figure, it's for cutting trim to match sash windows. The sills are angled at 15 degrees.

Darrell

always the last guy to buzz in on Jeopardy

Re: old miter box

#17

I always thought . . .

Henry Higginbotham

I always thought sills were cut at 1:4, which is just a fuzz over 14 degrees. Have I had it wrong all this time?

Re: old miter box

#18

Re: Before chop saws...

cathy

I tend to think you're right, John, that they just put the numbers there because they could. I don't know if it was trendy when this miter box came out, but it just occured to me that it could be used for parquet. Everything else I could think of required the cuts to be lengthwise of the grain and hard to do on this miter box. Moulding in a turret could be right, though.

I just found a calculator on the internet (who knew?) and if the circle has a radius of 12 and the pointy angle of one of the 24 sections is 15 degrees, then the 'run' would be 11.5 feet and the 'rise' would be 3.1 feet. That would be a rise of 1 to a run of 3.7 which is, actually, not useful, either. Never mind.

I guess it'll have to go down in history with crop circles and stone henge as a mystery.

Do you all know where I can go to identify other weird old tool things? Sorry to bother, but I can't just not know. I'm not sure they're wood related.

Re: old miter box

#19

Off topic posts *LINK*

Bill Houghton, Sebastopol, CA

Off topic posts are fairly common, and some of them include whatsit posts. Pictures help. If you've got a digital camera, you can put multiple pictures in your posts by establishing a profile (see link below), which will then let you upload the pictures from your computer. There are size limits, format requirements, etc. - see the FAQs at the top of the page.

The collective knowledge here always amazes me, so it'd be worth your while, with the understanding that it should be occasional, not daily.

And, if they're old tools, you might get quicker responses by posting over on the Hand Tools messageboard. Sounds like we need to invite you over there anyway.


http://www.woodcentral.com/faq/profiles.html

Re: old miter box

#20

Re: old miter box

Fred Davis

Now that Steve has posted a pic of the miter saw I realize you were talking about one I had given away about 25 years ago , because it just gathered dust and had been rendered obsolete by a Chopsaw.

I bought it for ten bucks from a Picture frame shop which had closed it's doors in Hayward , CA.It was the first box I owned with a depth gauge for cuts and the Backsaw was beautifully made by "Henry Disston and Sons for The Stanley Toolworks", that is etched on the blade. I often wished I had kept it , but the guy who got it needed it and I didn't.

BTW , if your thinking of Rise and Run as in a Roof , the closest cut 15 degrees is 14 degrees which gives a rise of 3" to a foot of run, like wise the next closest common roof angle to 15 degrees is 16 1/4 degrees which gives a rise of 3 1/2 inches to a foot of run.

FredD