Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Roy Underhill with a Sawstop *LINK*

Posts

Roy Underhill with a Sawstop *LINK*

#1

JL

Roy Underhill with a Sawstop *LINK*

JL

Roy with a Sawstop and some fried chicken. I didn't know that the Sawstop would work with fried chicken. I guess it would work with turkey as well. Note for Thanksgiving - don't use the Sawstop to cut the turkey, ham or anything but wood....


Highland Woodworking

Re: Roy Underhill with a Sawstop *LINK*

#2

Change of plans.....

Thomas Skaggs, Foothills of Mount Level

I was planning to buy a Saw Stop for my kitchen to butcher chicken and other meat. Now I am having second thoughts.

T.

Re: Roy Underhill with a Sawstop *LINK*

#3

Tommy maybe to slice Veggies?

Dustmaker Mike

never know could work :\

Re: Roy Underhill with a Sawstop *LINK*

#4

Re: Roy Underhill with a Sawstop

Jesse Cloud

Late in the afternoon the other day, we were all tired. A buddy was setting a high end miter gauge for a critical cut. Forgot to tighten it down. The sawstop went off. Replacing the assembly was way less than replacing that miter gauge not to mention a trip to the emergency room (which probably would have paid for the whole saw). Made us all think.

Re: Roy Underhill with a Sawstop *LINK*

#5

Jesper, Denmark

Re: I don't understnd what all the fuss is about..

Jesper, Denmark

...when everybody knows that the right tool to carve the turkey is the bandsaw.

Works great for cutting steaks from a frozen sirloin too. :b

Re: Roy Underhill with a Sawstop *LINK*

#6

What happened to all the other posts ?

Chuck Lenz

So much for freedom of speech, the right of the people to voice their opinions. Nice, what an incredibly selfish and unAmerican thing to do.

Re: Roy Underhill with a Sawstop *LINK*

#7

many years ago, someone gave me this huge salmon

Bruce, a MN Galoot

that I would periodically cut up with my band saw. Worked pretty well, too. That year the weather was extraordinarily cold, and I kept that fish out in the garage.

Re: Roy Underhill with a Sawstop *LINK*

#8

Re: What happened to all the other posts ?

Larry in NW OHIO

Come on Chuck If there were some posts pull, they were pulled for a good reason. I had a post pulled a couple days ago, and when I found out why, when I reread it I could tell. I didnt mean anything by it, but when I thought about it, it dawned on me it could have went a bad way and I didn`t give it a thought when I typed it. I wrote whoever it was that contacted me and apologized and it was done with. Larry

Re: Roy Underhill with a Sawstop *LINK*

#9

Re: And the reason is what ?

Chuck Lenz

Larry, I haven't heard a reason, so I guess we all get to assume, and what I think it looks like is whoever yanked it all is chooseing advertiseing dollars over the freedom of speech.

Re: Roy Underhill with a Sawstop *LINK*

#10

Re: And the reason is what ?

Nat Robison

I doubt it has anything to do with free speech or advertisers. Posting here is a privilege, not an absolute right. If you want to host your own website, you can dictate what goes on there. I didn't even check out the original post but from what I gather, it was humorous. Your reaction out of the gate was negative. When things head political, as in an anti-China rant, administrators may choose to cut the thread.

Chuck, if you honestly look at many of your posts, they have an overwhelmingly negative slant to them...... be it your in-laws who dump work on you that you choose not to refuse, Sawstop, Asian-produced machinery, anyone who uses a table saw when you would choose a miter saw, etc.

If you have an idea that's better than what's out there, put it into action. Don't keep saying "the man" is keeping you down.

Re: Roy Underhill with a Sawstop *LINK*

#11

Re: And the reason is what ?

Paul Cates - Henderson, KY

I seriously doubt that it's advertising dollars, and you don't have freedom of speech here. Consider the title of your initial response. That alone was a good reason for it being pulled, IMHO.

Re: Roy Underhill with a Sawstop *LINK*

#12

I can offer at least one reason

Bill Houghton, Sebastopol, CA

You'll recall that the forum rules include the following: "[No] Off-color posts, dirty jokes or swearing. Please refrain from saying anything you wouldn't say in polite company or in front of your children."

Your post in that subthread, Chuck, made a reference to a male body part that, even in these modern liberated times, is not usually a matter of public discussion; and others picked up on it. Ellis made the decision to yank the whole thread.

Bill, one of the moderators

Re: Roy Underhill with a Sawstop *LINK*

#13

Don't forget...

John in NM

We're all just guests here in Ellis's "house", being a good guest requires a certain level of restraint and manners (though I've certainly failed in that regard more than once). On the rare occasion where manners have to be enforced, perhaps we guests should learn to swallow it with good grace.

I find the moderators here to have exceptionally good judgement, and they rarely need to pull any posts - and I firmly believe that the two things are closely related.

If you find this forum too restrictive, I could suggest a couple others that I no longer post on, where one is apt to long for the free and easy environment of Stalinist Russia (ok, that's a bit of hyperbole.... gotta have a little fun :D)

Come to think of it, I don't even know who the moderators are other than Bill....

A final point.... as a guest you do not have freedom of speech. If you want that I suggest you start your own forum and say whatever you please there.

Re: Roy Underhill with a Sawstop *LINK*

#14

I don't need to carve them....

John in NM

But tell me which machine will pluck the darn things for me!

Jean raised turkeys this year, and I'm sooooooo tired of plucking them! Just two more to go, the light is near.

Re: Roy Underhill with a Sawstop *LINK*

#15

Moses Yoder

Re: Think about it

Moses Yoder

Chuck, this forum belongs to Ellis Wallentine, which he is providing free of charge to all of us woodworkers. You just called him "incredibly selfish" and "un-American". Providing a public forum for woodworkers to gather and discuss their hobby is the most unselfish and most American thing I can think of right now. In my opinion you owe him an apology. He pulled my post too, and in thinking about it now I should never have posted it. I'm sorry he had to take the time to keep the forum clean because of something I did.

Re: Roy Underhill with a Sawstop *LINK*

#16

Belt sander with 24 grit?

Phil Joines

Re: Roy Underhill with a Sawstop *LINK*

#17

Re: Think about it

Marv

I've had my posts yanked more than once. Once in awhile I like to test the limits and the boundaries. The problem is, if Ellis and or his Moderators allow the marginal stuff to go through, it becomes more and more difficult to draw that line. So the best thing to do is to not allow any of it. One time Bill emailed me and warned me and I came back and deleted my own post. :b :b

We shouldn't be surprised or disappointed or ticked off when the Moderators do their job. I've been in chat rooms where anything and everything goes. In a very short time, that's all that goes on in those chat rooms.

Marv