Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

What to do with old bandsaw blades?

Posts

What to do with old bandsaw blades?

#1

What to do with old bandsaw blades?

wilbur

I think I have finally come to the end of the useful life of a few of my bandsaw blades, and am replacing them. What I don't know is what to do with the old bandsaw blades. I really am inclined to cut them into short lengths and toss them into the trash, and I am not really that much into tool making.

Any ideas before I toss them out?

Re: What to do with old bandsaw blades?

#2

Clint Searl

Re: What to do with old bandsaw blades?

Clint Searl

I seem to remember an article in FWW from many years ago that highlighted a wooden bow saw with a blade that appeared to be a section on bandsaw blade. The craftsman featured, demonstrated cutting dovetails with it using the blade twisted 90 degrees in the frame.

Clint

Re: What to do with old bandsaw blades?

#3

JL

Re: What to do with old bandsaw blades?

JL

Make shedding blades for horse and dogs. Blunt the teeth with a file. Cut the blade into a number of increasing lengths. Make a "banjo" or "lollipop" with several of the lengths. Put some "scales" on the end and drill and fasten the scales together.

The shedding blade can also be used as a "poor mans" rasp.

Re: What to do with old bandsaw blades?

#4

Great Design for a Back Scratcher

George@Colonel's Workshop-Havertown PA

Re: What to do with old bandsaw blades?

#5

see if you could make this. *LINK*

Roy Anderson

see link--Japanese saw rasp.


Japanese saw rasp

Re: What to do with old bandsaw blades?

#6

Re: see if you could make this.

Marv

Roy,

Think I'd just buy the rasp and go ahead and toss the bandsaw blade.

Marv

Re: What to do with old bandsaw blades?

#7

Kneale Brownson

Check area schools?

Kneale Brownson

I used to take both wood and metal cutting band saw blades to the local school's shop department. They used them for practicing blade welding/sharpening and for making things like the other uses described here.

Re: What to do with old bandsaw blades?

#8

Re: see if you could make this.

Roy Anderson

Same here, but he asked, so I thought I would throw out a challenge.

Re: What to do with old bandsaw blades?

#9

Re: What to do with old bandsaw blades?

Jim Pugh

Why not just take them to your metal recycle place? Maybe they'll end up as a new blade someday.

Re: What to do with old bandsaw blades?

#10

Toss them

John in NM

If you want to save some for scratch stocks or something, just save a foot or so. You can break them using two crescent wrenches. Bandsaw blades are so cheap there's little point to trying to re-use them, like scrap wood, I always seem to have an old blade or two around.

Re: What to do with old bandsaw blades?

#11

Don't just Toss them

R Payne

If you don't want them, either recycle them (you may get a couple bucks) or find a local blacksmith you will use them.

ron

Re: What to do with old bandsaw blades?

#12

They make really Great

Merle

dental floss for wooden dentures!! :D