Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Are Woodworking Shows Dinusaurs?

Posts

Are Woodworking Shows Dinusaurs?

#1

Are Woodworking Shows Dinusaurs?

iew

Are Woodworking Shows Dinosaurs? Went to the Dallas (Mesquite) WW show today and it was half what used to be. Didn't buy a thing, nothing impressed me. The only thing I may purchase is a Bosch PS31-2A drill, very nice size and lots of power. You need a chain hoist to lift the drills of today. Also discovered the Arlington Show will not happen this year.

Re: Are Woodworking Shows Dinusaurs?

#2

Re: Are Woodworking Shows Dinusaurs?

George Colonel's Workshop-Havertown PA

Hello Lew,

I enjoyed going even as they became smaller and less attended. Judging from the crowds I saw there were still plenty of people who enjoyed them, even though their numbers visably diminished with each passing year. If they were availiable close by, I'd still attend despite decreased personal mobility. The demos and lectures were always worth while. Participation by individual vendors had to be expensive, and my guess is that all the bean counters squaked too loud to sustain that kind of marketing effort. I loved the opportunities to test drive and compare various tools.

George

Re: Are Woodworking Shows Dinusaurs?

#3

Re: It's only going to get worse

Chuck Lenz

Re: Are Woodworking Shows Dinusaurs?

#4

Re: Are Woodworking Shows Dinusaurs?

Larry in NW OHIO

My BIL always go to the Columbus, Ohio, show in mid January and by the amount of people that go there it sure is not getting any smaller. It`s always crowded there, the vendors have the hall almost filled. I hope they keep having them. The only thing, I wish they would have them in the spring, or sometime when there isn`t a chance of snowstorms. We missed a couple of times because of snow. Larry

Re: Are Woodworking Shows Dinusaurs?

#5

Not All.

Thomas Skaggs, Foothills of Mount Level

A rare exception I found was the Woodworking in America show that recently was held in Cincy. Unlike any show I have been to in many years. If they have it again next year I highly advise going. Ellis will keep us posted I'm sure.

Tom

Re: Are Woodworking Shows Dinusaurs?

#6

Re: Are Woodworking Shows Dinusaurs?

Bill Turpin in WNC mountains

Klingspor Show this weekend in Hickory, NC is always a great show. I had to park a quarter of mile away last year. It is always a fight to find parking!

Re: Are Woodworking Shows Dinusaurs?

#7

Re: Are Woodworking Shows Dinusaurs?

Phil Joines

They might get a better response it they advertised. I didn't see anything about it in the Denton paper or hear anything on the radio.

Re: Are Woodworking Shows Dinusaurs?

#8

Jim DeLaney, Austintown, Ohio

Re: Are Woodworking Shows Dinusaurs? *LINK*

Jim DeLaney, Austintown, Ohio

Looks like they've moved it to February for 2011, Larry. Not sure whether that's good, or not. Still a pretty good likelihood of nasty weather then.

I've had to cancel attending a couple times in the past few years due to weather. A 175 mile drive in ice and snow, - and below zero temps - just doesn't appeal to me much any more.


Woodworking Shows Schedule

Re: Are Woodworking Shows Dinusaurs?

#9

Advertising

iew

I had actually forgotten about the show until I saw it on TV Saturday!

Now a Klingspor show would be great, I likes dat paper!

Re: Are Woodworking Shows Dinusaurs?

#10

And you call yourself a Marine?

Dustmaker Mike

A 175 mile round trip in the snow should be child's play for you. I hope to make it in Feb I am not planing any travel for Q1 next year but that is always subject to change sort of like the weather.

Re: Are Woodworking Shows Dinusaurs?

#11

Re: Are Woodworking Shows Dinusaurs?

Janice Manuel

I'm planning to be at the show in Hickory on Friday...is anybody from WC going?

Re: Are Woodworking Shows Dinusaurs?

#12

Re: Are Woodworking Shows Dinusaurs?

Chuck Lenz

ACME Electric Tool Crib of the North usually has a Woodworking show every year. I use to go, but I really don't care to listen to sales pitches, and for all the years that I've shoped there, I don't find the place to be that friendly.

Re: Are Woodworking Shows Dinusaurs?

#13

Re: Are Woodworking Shows Dinusaurs?

Dave Paine

I hope this does not happen, but I fear it is happening.

I live in Eastern PA, as does Ellis. The "local" WW show stopped, and last year the WW Shows had a show in York, but not this year.

My only choices are Somerset NJ and Baltimore. Former is closer.

I like the shows to see a greater selection of tools and vendors.

I would personally be willing to pay a higher ticket price. I have no idea what the vendors have to pay, but I expect these fees are contributing to the low attendance. Fewer vendors, fewer patrons.

If the shows stop, I think this will be a sad day.

Re: Are Woodworking Shows Dinusaurs?

#14

Re: Are Woodworking Shows Dinusaurs?

AZ in Colorado Springs

I went to the wood working show in Denver last weekend. Last time I went was three or four years ago. It seemed as though there were fewer vendors there, but more booths with local wood working guilds and clubs -- groups I'd never heard of. The show has been in the same venue in Denver for many years, and the hall seemed just as full as before, just a bit different in who was there.

The saw stop demo was performed by a guy from the local Woodcraft store. (I suggested that his demo would be more convincing if he just reached out to grab the spinning blade. But he didn't do that.)

Also, there was a single log milling demo, and it was set up outside by the back of the building. I would not have known it was there if not for buying some boards and taking them out a side door to my truck.

So, I don't think the shows are necessarily dinosaurs, but maybe two trends are making them change character. As marketing strategies change and probably are more focused on the internet, and demo films can be posted to the internet, maybe manufacturers don't see the same return from wood working shows as in the past.

Also, there was a thread recently regarding the growth and/or future of wood working. If the population of enthusiasts is not growing like maybe it once was, maybe that also leads to diminishing returns at wood working shows for the manufacturers?

I'd also observe that the price of admission has not changed in at least four years, so the show must be paying for itself.

Cheers