Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Sanding Mats & Air Hose Connections?

Posts

Sanding Mats & Air Hose Connections?

#1

Sanding Mats & Air Hose Connections?

Thomas Norton

Would you guys know of a good quality non-slip sanding mat? The one I have slides all over my bench and does not grip very well. Also the quick change air coupling for my air tools are leaking. And the ones @HD are imported junk. So any leads??

Thanks

Re: Sanding Mats & Air Hose Connections?

#2

Re: Sanding Mats & Air Hose Connections?

Bill Tindall

I use the mesh stuff that goes under rugs. I have a whole roll of it that gets cut to custom sizes for this and that anti skid need. It is great on a bench for handing work in progress. Any tiny hard "crumbs" that might score the surface of a piece fall harmlessly into the voids.

Klingspore carries high quality couplings, I think made by Dynabrade. Northern Tool has US made couplings. I have bought from both places and the quality is lasting.

Re: Sanding Mats & Air Hose Connections?

#3

Re: Sanding Mats & Air Hose Connections?

AZ in Colorado Springs

Regarding a sanding mat, I use a piece of carpet padding. I went to a carpet dealer and found a big piece in the dumpster, about 8'x10' that I got for free. Was a brand new "scrap." I cut it into several pieces ranging in size from 18" x 24" to 3' x 5' in size. The piece that is 3' x 5' is used to protect the tabletop during staining & finishing.

Re: Sanding Mats & Air Hose Connections?

#4

Re: Sanding Mats & Air Hose Connections?

Don Evans

You may already know this but there are 3 different types of connectors for air hose.

I cannot remember the names of them except one is called "industrial" they look very similiar to each other and two very close looking to each other.

Point is, if you pick up male of one type and female of one of the others they may lock together but will leak badly.

Wonder if that is part of your problem?

Don

Re: Sanding Mats & Air Hose Connections?

#5

Re: Sanding Mats & Air Hose Connections?

Don Evans

Forgot to say, go to Northern Hydrolics if you can, ask said they are good.

Other would be to order from MSCDIRECT.COM

don

Re: Sanding Mats & Air Hose Connections?

#6

Re: Sanding Mats & Air Hose Connections?

Larry in NW OHIO

I get some of mine @ Sears and big box stores, also bring and old fitting, if it`s the male fitting, and compare them. Look @ the flat part of the male fitting, that is where I had trouble with them, one is just a hair longer that the other. Compare the two and I`ll bet that is your problem. Most definently stay with USA made. Larry

Re: Sanding Mats & Air Hose Connections?

#7

Rick L

Re: More like 13 types of air fittings...

Rick L

You can't beat www.mcmaster.com for them