Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Old to New?

Posts

Old to New?

#1

Old to New?

Larry in NW OHIO

I had an old DC blower lying around and when the leaves started to fall I got an idea, sometimes very dangerous, well anyway I converted it into a leaf blower. It has a 7 1/2" inlet and a 5" outlet. I put a 4" reducer on the outlet because I used PVC since it is a lot more stiff than metal. Well any way the question comes up, which would be better at blowing the 4" or the original 5". In other words, which would blow better. Thank you. I`d send a picture but I lost my picture sizing program, can someone help me there also. Thanks again. Larry

Re: Old to New?

#2

Re: Old to New?

del schisler

which pic sizing program did you have? This is the one i use http://www.irfanview.com/ . I belive that the 5" probly blow more. The 4" may cut down a little bit. But i don't belive it will be that much. The blower has lot's of power. If you can take the pipe off when it is running and change to other pipe when running. You can see and here the difference. Probly none ?? Post back with result's thanks

Re: Old to New?

#3

Clint Searl

Re: Old to New?

Clint Searl

Higher velocity with thw 4".

Clint

Re: Old to New?

#4

Re: Old to New?

Larry in NW OHIO

Del I had irfanview but I lost it when I got a new computer. I tried to go to it again with your post but it had so many different things I didn`t know what to do. I wish I had my old program back, I wish also I new which program I had. Thanks Larry

Re: Old to New?

#5

sent you a email 

del schisler

Re: Old to New?

#6

follow up larry   link

del schisler

the page i sent you has all the version's. What you can do is down load the 4.25 and if that isn't the one delete it and down load the other below tell you find out which one you had del

http://www.oldapps.com/irfanview.php?old_irfanview=27