Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E Peacock

4 Oct 2010

Good Morning Everyone,

We've been really loving all the nice cool weather we've been having and it's an awesome welcome from the heat of the summer.

The shop is getting swept and cleaned and been making advances in getting my shop clean as well as some necessary firewood stacking. I help Mark Cothren align his tablesaw and did some test cuts to check it out and then setup his Incra Miter 1000. Mark is about to make his 2nd craddle, the 1st one I had the honor of helping him and the 2nd one will be made by him. I am extremely happy for Mark and his family.

The LOML and I have been working on re-upholstering my Great Grandmother's old chair and we hope to get it finished this week. After that, I will be starting the plans for my daughter's hope chest and then construction of the hope chest. Joseph, my son, wants to make himself a gun rack and I guess I'll be the "project instructor" for his project. It's time for him to learn how a piece goes from idea to finished product.

Well, that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments.....

#2

Watching the Stain Dry

George Colonel's Workshop-Havertown PA

Good Morning Dennis,

Saturday consisted of chess armies marching off to the stain cans. All the scroll and lathe work is complete. The tools are resting and will soon be cleaned and made ready for their next big adventure. I stained all the pieces by immersing them individually in quart containers of minwax mahogany oil stain and Deft Honey Oak as appropriate. I'm still waiting for them to dry completely. I patted them dry with paper towels, but didn't remove too much film/pigment. In all, 256 stickey little light and dark chess men and women are arrayed over every horizontal surface in the shop. Now I can sit for another day or two watching them dry.

Saturday afternoon was beautiful and I washed and waxed my Mustang, and applied a little touch-up to the stone nicks. Sunday I watched football and napped in my recliner. We had a small dinner party last night with only 5 kids and two grandkids. It was a happy time with good company, good food, lots of cold beer. It was over too quickly.

Have a great week, Dennis.

George

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

Mark Mandell - Gone Round In Jersey

I actually got to spend a weekend in the shop. Other Stuff got put on hold as my daughter's open house is just two weeks away, so the kitchen island/table is taking center stage. The 36x52" top was completed last weekend, put through the Performax, and given it first two coats of Waterlox sealer.

This weekend was devoted to fabricating the inverse tapered legs. My daughter liked the composite legs I did for SWMBO's coffee table, so that got translated to the island legs which are 40" high. They're a sandwich of cherry over a maple core with four Wenge inlays for some extra zip.

This is the maple/wenge core with the wenge set to match the final taper (and save wenge)


They were run through the Performax on each side to get a perfect glue surface then the sandwich is glued up.


The tapers (1/2" on each side over 40") will then be done with a sled going first through the planer and second through the Performax.


Re: WC Weekend Accomplishments.....

#4

You Clearly Have a Leg Up on the Table, Mark

George Colonel's Workshop-Havertown PA

Good Afternoon Mark,

I had a different kind of sandwich for lunch today.at our kitchen table. 8)

George

Re: WC Weekend Accomplishments.....

#5

Something of a Stretch, George

Mark Mandell - Gone Round In Jersey

But I'm workin' on it.

Re: WC Weekend Accomplishments.....

#6

Will that go through your Performax?

Barry Irby

I have a 16/32 and I think the maximum thickness is three inches. It looks too thick to me.

Looks great, just to big for the Performax.

Re: WC Weekend Accomplishments.....

#7

22-44 Pro

Mark Mandell - Gone Round In Jersey

takes up to 6", Barry. (background of pic #2)

The sled + the leg is only 5". Final dimensions on the legs with be 3-1/2 square at the foot and 2-1/2" square at the top. Top (1-1/4" thick) will be at 41" with 3-1/2" stretchers leaving 36" clear for bar stool seating on one side of the island. Opposing side will have two 12"x48" shelves and a backer in maple. Stretchers will be solid cherry.

Re: WC Weekend Accomplishments.....

#8

Re: WC Weekend Accomplishments.....

Larry in NW OHIO

LOML and I went to our youngest to do some preventive maint. We blew out the dryer pipe, 25 feet, not much came out, but looked clean. Also did the refridgerator. I put filters on it about 6 to 8 months ago and he said he cleaned it out a couple months ago, but it was still very dirty. But the coils were fairly dirty. Then we played with our grandson. It was all fun. Larry

Re: WC Weekend Accomplishments.....

#9

Rebuilt a broken wood screw clamp

Charles Yawn

One arm of a 10" wooden screw clamp broke and I decided to make two new wood arms with some oak I had around instead of trashing the thing. Making the two arms was easy since I had a good template. The hard part was getting the two screws back in the right way so the clamp works and closes like its supposed to. I think a mechanical engineer type degree would have been helpful.

Charles

Re: WC Weekend Accomplishments.....

#10

Re: 22-44 Pro

Barry Irby

I doubted you would make that rookie mistake. I have occasionally wished mine would take thicker stock. I knew some of them would, but I thought it was an option or kit you could buy. Is it the "Pro" that designates that? A friend bought a 22/44 but I don't know if it was a Pro version. I sanded something for him and he was so impressed he had to have one.

Re: WC Weekend Accomplishments.....

#11

Re: 22-44 Pro

Mark Mandell - Gone Round In Jersey

IIRC the "Pro" trim line came with the step casters and the in/out feed rollers

Re: WC Weekend Accomplishments.....

#12

Correction

Mark Mandell - Gone Round In Jersey

Takes up to 5", not 6.