Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

This is a great site, reason # 500

Posts

This is a great site, reason # 500

#1

This is a great site, reason # 500

Larry in NW OHIO

Finding things cheaper than they should be. A couple of weeks ago someone posted a sale, more like a fire sale, of Milwaukee router bits I think at Amazon. So I went to look and bought 6 of them, some I didn`t have. I just used one and it was a special one. It was a 5/8" quater round and it was one I just needed, I thought I`d have to buy one for this job. I was looking around at what I had and came across this one. It said it was 1 1/2" dia.-5/8"R , I guess that is why they were so cheap, a miss print in the size, I needed 1 1/4"R. Thanks to whoever it was that posted that. Larry

Re: This is a great site, reason # 500

#2

Same Thing Happened to Me

George Colonel's Workshop-Havertown PA

GHood Afternoon Larry,

I jumped at the chance too, and ordered sizes of round overs which I didn't have. Plus a few replacement bits for some in an old Jesada set. It cost me nearly $100 to "save" that much :\ The mix-up on the sizes worked to my #2 son's advantage since he got a few bits which I now had duplicated. Plus, he also got a perfectly serviceable rabbeting bit+bearings of Jesada origin.

My Milwaukee rabbeting set works wonderfully well, and I believe it cost around $39--not particularly cheap. My #3 son mentioned his need for a rabbeting set, and I located one from Woodline for about $25 and it is a real honey. Bearings and bit neatly boxed in a wood case, and with spare bearing retainer screws. I think his set beats mine, for sure.

George

Re: This is a great site, reason # 500

#3

Re: This is a great site, reason # 500

FredD

Your welcome Larry , I ordered one 5/8ths radius bit with a half inch shank abong with some others and they sent me two with 1/2" shanks and one with 1/4".

One would have been plenty , but what the heck 4.99 each.

FredD

Re: This is a great site, reason # 500

#4

So, Colonel, I guess we can't say

Bill Houghton, Sebastopol, CA

that you're getting around, since you got more than one.

But we can say that you are, with all those bit choices, going around and around.

Bill, circling the wagons

Re: This is a great site, reason # 500

#5

You'Ve put A Real Good Spin On It, Bill

George@Colonel's Workshop-Havertown PA

Re: This is a great site, reason # 500

#6

Does sound like that was a good rout(e)

Bill Houghton, Sebastopol, CA

for you to get some nice tools.

What do you think? Did I collet well?

Re: This is a great site, reason # 500

#7

Well, And With Wrenching Humor

George@Colonel's Workshop-Havertown PA