WE MOVED...
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

More from IWF- Lee Valley dovetail saw

Posts

More from IWF- Lee Valley dovetail saw

#1

More from IWF- Lee Valley dovetail saw

bill tindall

By the way Ellis, you promised a report on IWF.

Curiously, Lie Nielsen was absent from the show this year. In the past their booth was packed.

Lee Valley had available to use a large contingent of their planes and saws. Planes and saws are like rifles( or fill in the blank here), you need to hold one to know if it can be loved. That is a problem for catalog sales, and a problem I am betting is going to bite LN as they pull their wares out of stores.

I tried the LV block plane and it was a pleasure to hold. It is the plane I would own if I was buying a new one. It ain't cheap.

The dovetail saw is cheap, and looks strange. I was prejudiced against it from the first observation. But hey, it was sitting there waiting to be tried, if for no better reason than to be certain I didn't like it. When I picked it up it was it was like grasping anything that is just right (fill in the blank here, I'll say a well balanced double bitted ax). Strange looking as it is, it felt perfectly at home in my hand, as much or more so than the traditional variety of these saws. I could imagine searching for things to saw with it just because it was so nice to hold. It sawed dovetails with the same feel as a LN saw, so the teeth must be similar, if not identical. At half the price of the competition, I say, put a bag over its head and own one. It is the saw I will be recommending. If LV introduces a similarly value priced carcass saw I will be buying one.

Re: More from IWF- Lee Valley dovetail saw

#2

Ellis Walentine

Thanks, Bill

Ellis Walentine

Your insights are always welcome and enlightening. I'll look forward to more from this year's IWF. As for my report, it is Shop Shot #933, but it is still under construction. There are about 25 photos in it, and more of my rambling commentary than you'll probably want to hear. If I can grab a few spare hours, it'll be done soon.

Cheers,

Ellis

Re: More from IWF- Lee Valley dovetail saw

#3

Ellis

Larry in NW OHIO

Ellis in case you didn`t notice but your Shop Shot #933 is listed as 932 in the shop shots and there are two 932 shots. Not the end of the world but I thought I`d bring it to your attention. Larry

Re: More from IWF- Lee Valley dovetail saw

#4

Ellis Walentine

Fixed

Ellis Walentine

Got it, Larry. Thanks.

Ellis