What is your favorite wood? Why?
Clint Searl
Mine is cherry, for its natural richness, figure, and working characteristics.
Second choice, walnut.
Clint
Knowledge You Can Build On — Est. 1998
What is your favorite wood? Why?
Clint Searl
Mine is cherry, for its natural richness, figure, and working characteristics.
Second choice, walnut.
Clint
Re: What is your favorite wood? Why?
Thomas Skaggs, Foothills of Mount Level
I'll second cherry. I love its workability and durability. The smell when I cut it is not bad. I am always pleased to see a piece I made 4 months later when it has produced its color. I especially love curly cherry...all of the above plus beautiful exotic figure.
Tom
walnut
Bill Houghton, Sebastopol, CA
although, if I was forced to base my statement on the wood I use most frequently, it would be Douglas fir.
Bill, pining for the day when I've finished refurbishing This Auld Haus and can get into the shop
Without a doubt, Cherry
Lee Schierer McKean, PA
I prefer Cherry for its workability and smooth finishing characteristics. Next would be maple for nearly the same reasons. Figured wood being preferred over plain in both cases.
The best smelling wood while working is hickory.
Lee
Re: What is your favorite wood? Why?
Dave Bair, Eaton Rapids, MI
White oak; it is strong, heavy, and, if quarter-sawn, the figure is quite unique. It can be stained or fumed but is a beautiful honey color on it's own. I also work in cherry, maple and walnut, but white oak is just my favorite.
Walnut
Bruce, a MN Galoot
Besides the color, I love the consistency of the grain and its workability.
Re: Walnut
Jesse Cloud
I've been working almost totally with walnut for a couple of years. Just last week, I told my wife that the next project has to be something other than walnut. But, sure enough, as I'm designing the chair I want to build I'm thinking - wouldn't that look great in walnut?
Re: What is your favorite wood? Why?
JL
Maple - hard maple - takes a crisp line, nice grain, good strength. Makes good legs.
Soft maple - big leaf has that nice reddish tint, takes a good line, pretty grain.
Cherry is also great.
Re: Black Locust.....
Jesper, Denmark
It is just so strong, independent, ornery and difficult to work as well as beautiful, so you must respect it.
Cherry, maples, oaks, ash, walnut
George Colonel's Workshop-Havertown PA
Good Afternoon Clint,
Also, poplar, birch, mahogany, 1/4 sawn sycamore, and pine,or whatever alse is in the shop.
Because it all grows on trees.
George
Pear, then boxwood *LINK*
David Barnett
The plainer the better, for all the reasons in the linked article.
And for small stuff, boxwood (buxus sempervirens), for its hardness, workability, how it holds detail, graceful aging, color and patina.
An article on pearwood
Re: Black Locust.....
wilbur
I almost have the same sentiment towards black locust:
It is just so strong, independent, ornery and difficult to work as well as beautiful, so you must pitch it into the fireplace.

I like cherry and walnut, myself, with a nods towards walnut, unless it's a day that I like cherry, and excepting the days that I like white oak.
Is that true for all pear?
Bruce, a MN Galoot
We just returned from a vacation swing to the west coast where, besides meeting Bill Houghton (go to the quiet side for a pic), I met an orchard owner at Mt. Hood who grew pears. He had no idea that pear was a good furniture wood, but it made me wonder whether orchard pear trees would be good for furniture, too? Maybe these guys are sitting on a gold mine and don't even know it.
European pear ...
David Barnett
... or Pyrus communis, sometimes called Swiss pear, is indeed the species from which North American orchard cultivars are derived.
Eucalyptus...
Hoa in Alameda
is what my SWMBO prefers. It burns very well in the fireplace. 
Me? I like maple and cherry, especially when used together. The contrast is just great.
Re: What is your favorite wood? Why?
Merle
I agree with the white oak, but then I really like it's look in arts & crafts furniture, so I am not certain which is the driving factor. 
Re: What is your favorite wood? Why?
Frank Orfanello
I'm with you Clint....
Cherry, Walnut and then Maple for me.
Re: What is your favorite wood? Why?
Jim Dillon
Clint,
Gosh, I guess it would be the old standbys walnut and cherry, especially in combination. Both rather dull until you put the finish on, then WOW! Jatoba (Brazilian cherry) is another favorite; very hard but machines really well and a nice smell. QTR-sawn jatoba is like mahogany, but redder and beautiful. Locust (black or honey) in combination with spalted sycamore appeals to me. For a rich look, I like mahogany, especially for G&G style furniture with ebony accent. Quartersawn douglas fir is very nice, though soft; it also has a nice smell while machining - especially the pitch pockets.
Jim
*** SURVEY: THE IDES OF SEPTEMBER ***
Ellis Walentine
Good one, Clint. Let's make this our Ides question for September, a couple days late to be sure.
You left the question wide open to interpretation -- by what criteria are we making this judgment?
For workability, I like friendly woods like pine, cherry, mahogany, walnut, oak, etc., but they aren't always right for a particular use for a variety of reasons: strength, appearance, durability, etc.. I hate working locust and osage, but I'd use them for their durability, and osage has wonderful turning characteristics and color. Same with mesquite.
For its colors, aroma, workability and microscopic depth and shimmer, I love narra. It has always been at or near the top of my list. For sheer beauty and iridescence, I like koa and black acacia.
Pear, as laid back as it looks, is my favorite wood for turning, as it never seems to split. around the pith.
I could go on. I guess the upshot is that favorites are hard to call.
Ellis
Re: *** SURVEY: THE IDES OF SEPTEMBER ***
Clint Searl
Of course, the flip side of the question is, what is your least favorite common furniture wood? Mine is hard maple, because it is so hard to work by hand, especially with more figure, and because it has so little natural color, needing stain to give it any interest.
Clint
Re: What is your favorite wood? Why?
Larry in NW OHIO
Being we just got back from a trip to the Dayton VA for some testing and blood draws and shots for kidney transplant stuff. We stated and took a little side trip for the wife to relax a little. Went shopping of course, it`s what she likes to do to relax. The place we stayed at last night, the computer router didn`t work very well. So I just rested. So I`m a little late here. The best wood I like is basicly any that`ll go through the saw and take glue. But if I had to pick one would be Curly or waterfall maple. When finished, I think not to much can come close. Larry
Next you're going to ask...
John in NM
What's my favorite beer!
Wood and beer, I generally like them all...
But I'll have to go with walnut too, especially claro with lots of figure. Next is probably cocobolo, because it always surprises me by behaving well and looking pretty.