Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Can I predict sagging of shelf?

Posts

Can I predict sagging of shelf?

#1

Can I predict sagging of shelf?

ILYA Z

I want to build a roll-out shelf for some under-staircase crawl space. It's fairly wide, about 30", and about 50" deep. I have two questions:

1. If I know the size of the shelf, the type of wood I would use for it, and the amount of weight I expect to put on the shelf, can I calculate whether the shelf will sag and if so, how much?

2. What type of wood should I be using for the shelf? I expect it to hold things like paint cans and the like, so it should be able to hold a good amount of stuff with little or no sagging.

thanks.

Re: Can I predict sagging of shelf?

#2

JL

The Sagulator *LINK*

JL

Try it.


Sagulator

Re: Can I predict sagging of shelf?

#3

Re: Can I predict sagging of shelf?

Larry in NW OHIO

ILYA Anotherway to help it from sagging is to screw a 2x4 or something like it under the shelf or an edge in front of it like a 1x3. If this is going to be out of sight an the looks of it doesn`t matter you could put a couple 2x4`s, on edge under it and you could stack quite a bit on it. Larry

Re: Can I predict sagging of shelf?

#4

Ellis Walentine

Plywood

Ellis Walentine

The sagulator will give you deflection information for a lot of species of solid wood and also for several kinds of man-made boards such as MDF and particleboard, but for some reason they haven't included the types of hardwood plywood that you're likely to want for many projects. I ran a quick computation on 3/4" fir plywood, which should be similar in performance to typical "shop birch" or other standard hardwood plywood. I used 100lb. as the total load in a 30"W x 50" D drawer and I used 6" as the edging width (3/4" Eastern white pine, like you'd get at the lumberyard or big box). The deflection was 0.00".

Short story: use 3/4" birch plywood and glue it into grooves in the drawer sides. That should hold as much as you'll ever put in there, with little or no danger of deflection.

Ellis Walentine, Host

Re: Can I predict sagging of shelf?

#5

Re: Would Blonde be just as good? Plywood

Don Evans

What about "Blonde" instead of Birch, much cheaper. Seems like it would be just as strong but looks can fool one. I just used some for first time to make a back board for my work bench to hang things on and making rack for carving tools etc. So far got one carving tool rack done (Swiss Made & Austria tools) and mounted but haven't come up with good way to do the Flexcut stuff.

I got it at Lowe's.

Don

Re: Can I predict sagging of shelf?

#6

Ellis Walentine

Sure

Ellis Walentine

Lowe's plywood is low-end, generic stuff, with a lot of defects, voids, etc, and some of the cheapest Eastern-rim wood money can buy, but it is plywood and will still work fine for a utility drawer such as your roll-out paint drawer. Blond just refers to the fact that the wood is light in color, of an unspecified species, probably one from Indonesia or the Philippines, where this stuff is made.

Ellis

Re: Can I predict sagging of shelf?

#7

Sagulator Rocks - Thanks JL

Jesse Cloud

Re: Can I predict sagging of shelf?

#8

Re: Sure

FredD

Ellis,

One has to admire your struggle to avoid calling absolute crap what it really is.

if you think about it , you can see where "blonde" got in the equation, rather then calling it Maranti, they must have thought since there is RedWood, Black Walnut, Yellow Pine, Brown Ash..........

FredD