Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Craftsman router

Posts

Craftsman router

#1

Craftsman router

John Lucas

I picked up an older Craftsman router that is in really good shape. However it doesn't have the collet and nut. I went to the sears parts place and they have the collet but not the nut is no longer made. Does anyone know if the newer routers will take what looks like 5/8x18 thread nut. I plan to go by sears tonight and look. I'm a learning machinist and could probably build one but threading is still on my to be learned list so I'd rather buy it if I could.

Re: Craftsman router

#2

Re: Craftsman router

Tony - Memphis

I have a spare Sears router that somebody gave me for parts for my old Sears router (old = 15 years). I'm sure it has that part, but I'll have to check to be sure. Not sure if that is the same vintage as yours. If it is, I'd be glad to give it to you.

Tony

Re: Craftsman router

#3

Re: Craftsman router

Larry in NW OHIO

John Like Tony I have a few Craftsman routers, if Tony doesn`t have it let me know, if I do have one you can have mine. Larry

Re: Craftsman router

#4

Re: Craftsman router

John Lucas

Thanks I'll check on the model number tonight. I have several routers but you can never have too many. I want to set one up permanently on a sort of mini lathe that I built to cut threads in wood. Right now I'm using my Porter Cable which is the router I use most for other things.

Re: Craftsman router

#5

Re: Craftsman router

john lucas

Toney This router is model #315.17361 The collet is 1/4" only and the nut is 18TPI and close to 5/8". I looked at the new Craftsman routers and they are all 1/2" collets. Their trim router has a collet that looks close but may be the same thread as my Dewalt trim router which is the same size but a finer thread, possibly metric. If you have that part I would greatly appreciate it.

Re: Craftsman router

#6

Well Darn!

Tony - Memphis

I looked all over the shop last night and I can't find the darn thing! I would have sworn in was right in a specific place where it has sat for years, but it ain't there no more! I may have tossed it or put it somewhere last time I cleaned up. I saw the Craftsman edge guide the same buddy gave me, but the router wasn't there. I can't imagien that I would have tossed it as I still have my original working model and wanted the parts just in case. Sorry. I will look some more over the weekend.

Tony

Re: Craftsman router

#7

been there, done that, and probably will again

John Lucas

Re: Craftsman router

#8

Re: Well Darn!

Larry in NW OHIO

Tony You must have been in my shop. I did the same thing, I had craftsman router parts in a drawer, went there and nothing. Looked around the shop and still nothing, found 1 craftsman router but that was it. I can`t believe that I threw all that stuff away. Sorry John

Re: Craftsman router

#9

As the old saying goes...

Bill Houghton, Sebastopol, CA

�Better to have it and not need it than to need it and not have it�better yet to have it and be able to find it.�