Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

if you're planning a hobby shop and ...

Posts

Re: if you're planning a hobby shop and ...

#26

Re: if you're planning a hobby shop and ... *LINK*

Big Dave

Hi, Ron

I've read through most of the reponses, and thought I'd weigh in. I "completed" my shop last year. It's a stand alone in my backyard, and had a few years of thought that went into the planning before ground was ever broke. I'll touch on a few things here...

-At least 10' walls. And a vaulted ceiling adds a much more "open" feeling.

- I recommend at least framing for a garage door in to the shop, but installing a double door. The double door is more than enough, seals better for insulation purposes, and doesn't take up as much valuable wall space. And, if you decide to install a garage door, you won't have to re-do any of the framing...

- Plumbing. Install a bathroom with hot & cold running water.

- Electrical - Lots of outlets, and that includes putting them in the floor. Nothing worse than building a new shop and still tripping over extension cords... Oh, and don't forget outlets in the ceiling for air cleaners.

- Dust collection - Put it in the floor - See above. Locating the ports isn't all that difficult if you already know "how you work". Layout your tools, either on graph paper, or use one of the many online shop design programs, and caluculate distances from the walls. These don't have to be exact, but they do need to be relatively close. I brought power up through the floor in the same locations as the dc.

- Floor- I layed a wood floor over concrete. It was worth every penny.

- Walls- I was a volunteer firefighter for 10 years. I saw several fires where drywall saved the house. To make it so I could hang stuff wherever I wanted, I covered the drywall with 3/4" t&g cedar. And 5/8" drywall on the ceiling.

- More electrical - Think ahead for security, sound system, tv/radio, internet, telephone, etc.

- Insurance - Talk to your agent about insuring the new place. Some companies are a bit fickle when it comes to insuring woodshops in regards to heating and whether, or not, they "make money"...

That's probably enough for now. I've attache a link to the construction pics of my shop. There's about 450 pics, so it should give you a pretty good idea of what I did in my shop. I hope this helps, And good luck!!

Dave


Big Dave's Potbelly Woodshop

Re: if you're planning a hobby shop and ...

#27

Very neat, thanks a 450!

ron

Wow, that's a treasure trove for me. I'm bookmarking and studying it. Thanks for sharing!

ron

Re: if you're planning a hobby shop and ...

#28

Re: if you're planning a hobby shop and ...

Jim Neff

Ron,

How ironic! I'm converting a 26' X 35' pole barn constructed building into a woodworking shop on a property I own in Mountain Home. It is basically a used shell that needs to be insulated, rewired, a wood floor over concrete and, like you, lots and lots of new lighting.

I've decided to go with 2" X 4" facers on the floor on 16" centers and covering them with either 3/4" sheeting plywood or OSB - would love to put down a solid 2" X 6" wood floor but the expense doubles. Although a 2 1/2" step up when entering and leaving, the advantages are a softer floor for feet and legs, electrical wiring under the floor and a non-chipping surface if I drop a good chisel or plane which I am prone to do.

Doug Rye, the energy guru on the radio, advises wet cellulose in the walls for insulation, but I don't think anyone in the M.H. area does it anymore. Might try and figure out how to do dry cellulose in the walls as I install 3/8" OSB in lieu of sheetrock on the walls and then have the open gable ceiling foamed. I've located a guy in Mayflower with a bunch of 3 light flourescent fixtures with electronic ballasts/T8 bulbs at a great price and am thinking of installing four rows of four fixtures in each row for this 940 SF shop.

Ron, I would love to hear what you are looking at, especially H&A. Are you loking at a central dust collector? Would you be interested in trying to get a woodworkers club started in the area? Email me back. Thanks, Jim.

Re: if you're planning a hobby shop and ...

#29

Re: if you're planning a hobby shop and ...

ron

What's your email Jim?

Mine's ron-griffin@tamu.edu.

I look forward to chatting.

Re: if you're planning a hobby shop and ...

#30

Re: if you're planning a hobby shop and ... *LINK*

Big Dave

Am I reading this right? You guys are in southern Idaho?

We just may have to figure out a way to get together sometime - I'm way up in the skinny part of the state, in Post Falls....

Dave

[EDITOR'S NOTE: We've re-posted Dave's link to his shop construction pictures in case anyone missed them the first time around.]


Big Dave's Potbelly Woodshop

Re: if you're planning a hobby shop and ...

#31

No big guy; we talking Arkansas

ron

Re: if you're planning a hobby shop and ...

#32

Re: No big guy; we talking Arkansas

Big Dave

No worries! :D

Maybe we can still figure out a way to get together...