Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

A little project. Warning: picture heavy

Posts

A little project. Warning: picture heavy

#1

A little project.  Warning: picture heavy

doug f, san clemente, ca

Recently I inherited my Dad's 1947 Delta 14" Band Saw. It was in pretty rough shape after having been stored in an unheated garage for almost 15 years. But I had been wanting a second saw for small stuff and tight curve cuts, so I jumped in and tackled it.

Some new parts, a boatload of elbow grease and numerous cans of paint later, it's back together and humming like new. My only concession was a new magnetic switch; not available on the original model as far as I know.

BEFORE




AFTER




I'm amazed that a machine over 60 years old functions better than the new ones I've looked at. Thick metal parts, cast iron and steel make for a solid and long lasting piece of equipment.

I can see where people could easily get addicted to "old 'arn."

Doug

Re: A little project. Warning: picture heavy

#2

Gee! That thing's perty!

Stuart Hough

Nice job Doug!

Re: A little project. Warning: picture heavy

#3

I can see . . .

steve mackay

shes got a smile on 'er belt gaurd ! And, I'm noticing with my age, gray gets sexier and sexier ! Shes a fine, dignified Lady.

Re: A little project. Warning: picture heavy

#4

Re: A little project.  Warning: picture heavy

Larry in NW OHIO

Really veri purty and lookkin like he`s ready to be cuttn some woods. When I use to work for a living, the place I sleeped , er worked @ had something like a half dozen like that and even older. Sure wish I could have bought one when they sold out. Larry

Re: A little project. Warning: picture heavy

#5

(Message Deleted by Poster)

Chuck Lenz

Re: A little project. Warning: picture heavy

#6

Re: SAWeeeet !

doug f, san clemente, ca

It's on there, Chuck. Really smooths out the vibration from the old (and worn out) rubber belt.

Doug

Re: A little project. Warning: picture heavy

#7

Re: A little project.  Warning: picture heavy

John McGaw

Hey, I was born in 1947 and I'm better than the new ones. Why the surprise?

Re: A little project. Warning: picture heavy

#8

Ellis Walentine

Nice rehab

Ellis Walentine

You said it's humming like new. I'm wondering how it's tracking? Does the blade run in the center of both tires when you don't have the guides in place? Are the tires nice and pliable?

I think you'll be very happy with that saw. Good for you!

Ellis

Re: A little project. Warning: picture heavy

#9

Thanks, Ellis.

doug f, san clemente, ca

Yeah, it took some fiddling but the blade tracks right down the middle under power. It cuts nice and square to the table with almost no vibration. The only hangup is dust collection. In 1947 it wasn't a concern so there's no provisions at all. Gotta work on that one.

Doug

Re: A little project. Warning: picture heavy

#10

Re: Thanks, Ellis.

Jay Hanks

Doug what find of replacement power switch is that? There was a tip in a recent wood magazine I think on doing dust collection on that type of saw, not invasive. I will see if I can find it and post the information.

Re: A little project. Warning: picture heavy

#11

Re: Thanks, Ellis.

doug f, san clemente, ca

Jay - I got the switch from Grizzly. Replacements from Delta were way too expensive and not magnetic switches. I'm just a little more comfortable with mag switches and that big off button comes in handy every once in a while.

Doug

Re: A little project. Warning: picture heavy

#12

Re: A little project.  Warning: picture heavy

Bill White

You spent your time well. Always good to see someone free up the spirits in the old, well-made equipment.

The tool fairy will reward ya.

Bill