Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Grizzly customer service

Posts

Grizzly customer service

#1

Grizzly customer service

doug f, san clemente, ca

I ordered a new mag switch from Grizzly, quickly shipped and delivered. I installed it yesterday and the "ON" button buzzed under load. Probably a weak coil in the switch, so I wrote an email to customer service and described the problem.

I got an email back this morning saying a new switch was on the way, no charge, no questions asked.

Wow! It's a shame other companies don't note the lesson here. Next time I need tools, this will be the first place I go.

Kudos to a company that remembers for whom they're in business.

Doug

Re: Grizzly customer service

#2

Re: Grizzly customer service

Jerry Gibbs

I have had equally good service from Grizzly.

Re: Grizzly customer service

#3

(Message Deleted by Poster)

Chuck Lenz

Re: Grizzly customer service

#4

The only service even close . . .

steve mackay

to LV. When I started shopping for an up-grade to "industrial" for a combo sander it seemed most opinions of Griz were "low rent" "foregn made". Couldn't pass up the price though. Was so pleased that when my third "C-word" TS died I spent the big bucks for their's. Thing is couldn't nelive how easy it was to get both on the way here over the phone. They ain't LV but they ARE second on my list.

Re: Grizzly customer service

#5

Re: Grizzly customer service

Phil Joines

I've used about 10 of their magnetic and push button switches for as long as 10 years with no problems.

Re: Grizzly customer service

#6

Leo Cuellar

(Gloat) I'm about 20 miles from...

Leo Cuellar

the corporate headquarters in Bellingham, WA. They have even pulled items out of their display cases for me. The only problem I've been having with them, is that a lot of items are back ordered with some long wait times. Oh, and I wouldn't buy their air tools or metal working drill bits, really low quality. That said, I have a drill press, table saw, band saw, planer, shaper, 2 lathes, vises, an anvil and a whole lot of miscellaneous wood & metal working hand tools that I am very pleased with.

Re: Grizzly customer service

#7

Re: (Gloat) I'm about 20 miles from...

steve mackay

I've also heard that if you can get to a store you can save crazy money. Yes ?

Re: Grizzly customer service

#8

Leo Cuellar

Re: (Gloat) I'm about 20 miles from...

Leo Cuellar

Usually only during one of their tent sales(scratch & dent). They do have in-store specials pretty regularly though, and some close outs. They have coupons for discounts in one of our local free papers.

Re: Grizzly customer service

#9

Re: Grizzly customer service vs LV

North of the Border

Too bad Grizzly doesn't have a retail presence in Canada. I'd love shopping there, in addition to LV. I always support stores that have good management and care about their customers and staff. LV is a family owned Canada-wide business and unlike some other franchise woodworking stores in the States, it can dictate its return policy (one of the best in the world) and what not to the founder's desire. LV has stayed true to its roots and while profits are important, its owners and senior management do place customers on the top of their concerns. It's not perfect but the world (of consumerism) would be much better if businesses adopt its "customers first" philosophy in deed as well as in words.

Re: Grizzly customer service

#10

(Message Deleted by Poster)

Chuck Lenz

Re: Grizzly customer service

#11

No Sir, I do NOT . . .

steve mackay

work for Grizzly. Neither do I work for LV. I simply give credit where credit, in my opinion, is due. If I could find the same products at competitive prices from an American company I just might choose them. But they just aren't out there. I don't make the Big Bucks at this gig and never will. I do the same thing most pepole do . . . I buy the best I can AFFORD. If someone can afford a JET, great ! If JET could make a reasonably priced machine I could afford, GREAT ! Otherwise I'm forced to be un-patriotic I guess.

Re: Grizzly customer service

#12

Jim DeLaney, Austintown, Ohio

Re: No Sir, I do NOT . . .

Jim DeLaney, Austintown, Ohio

And the Jet very likely comes from the same plant - certainly from the same country - that made the Grizz.

Hardly any of our power tools are American made any more.

Even though the new Unisaw is purportedly made in America, I've gotta wonder just where the table, trunnions, and other castings were made. Somewhere offshore, I'd guess.

Re: Grizzly customer service

#13

(Message Deleted by Poster)

Chuck Lenz

Re: Grizzly customer service

#14

You're right . . .

steve mackay

I'm just a bad American. Shame on me.

I gotta go make some sawdust.

Re: Grizzly customer service

#15

(Message Deleted by Poster)

Chuck Lenz

Re: Grizzly customer service

#16

Leo Cuellar

Re: I never said that your bad . . .

Leo Cuellar

I also do not work for Grizzly. I do happen to live in the perfect area to be able to evaluate their equipment. I also do not make a whole lot of money. Having checked American made alternatives respective to price versus value, the imports often win. These days in order to get a good American machine one would have to buy vintage used in order to be able to afford one. We have a Jet table saw at work, it is the most poorly constructed saw I have ever used, but it was probably made in the same plant as the Grizzly. So if I can buy something that does everything I can think of making it do (I'm Very demanding), for less money, then that product is hardly inferior. That said, I do try to buy American made and local whenever possible.

I am sorry for the loss of your job :( We are currently having problems with greedy management sucking the life out of the company where I work. Until that situation changes, we are going to continue the slide into oblivion.(As a nation)

Re: Grizzly customer service

#17

Re:Chuck not quite right

Larry in NW OHIO

Chuck I just looked it up on Google and Reagen was not president in 94 when NAFTA was signed, it was Clinton, and it cost the American people a lot to buy the Congresstional signatures to get it pasted. Also we are still paying for it. Larry

Re: Grizzly customer service

#18

Lee Grindinger

An entirely different view

Lee Grindinger

I consider myself a citizen of the planet first, USA second. In light of that I want my fellow humans to do well. Whether they are Americans, Chinese, Indonesian or Mexican I want everyone to survive if not prosper.

I support wealth leaving the USA. For too long the USA has had a disproportionate amount of wealth while other peoples have lived in poverty and often starved. While they don't have decent drinking water you wonder what kind of second car to buy.

As an amateur anthropologist I know how cultures evolve. Europe did it, Britain did it, the USA did it, Japan did it, and now China's doing it. The cycles have sped up so China's reign as a manufacturing giant will be even shorter than Japan's which was much shorter than ours and so on.

Workers in the USA destroyed their reign as manufacturing giants by demanding higher pay. It's a natural progression that Japan went through and China will go through. As production costs become high in one country another politically resolved country will take their place, African countries are possibly next..., once some of those starving countries get their acts together.

I find it interesting you use the word "selfish" to describe the NAFTA move when it's pure selfishness on your part that causes you to bemoan wealth and jobs leaving this country and making others lives better.

With all due respect,

Lee

Re: Grizzly customer service

#19

(Message Deleted by Poster)

Chuck Lenz

Re: Grizzly customer service

#20

Re: An entirely different view

FredD

Lee, you should take your "Citizen of the World" view over to Japan and expound on it and see how far you get.

That country continually levies impossibly high Tariff's on American products and in most cases such as the Auto industry, flat refuse to accept it into the Japan economy, which results in our having a huge annual trade deficit with Japan .

We pay for that country's defense , give it our technology and it acts like it did before Perry opened it up to the west.

Japan is not a equal trading partner , has no intention of being one and in my view ,is not our friend, much less "favored nation" status.

Lastly if you knew the people I do in the Customs division of the Treasury department , you would be told in private that NAFTA is the worst treaty we have ever been signatory to in terms of preventing illegal drug traffic.

It has provided a uninspected avenue of Drug traffic , truck load size to enter the US daily with impunity.

FredD

Re: Grizzly customer service

#21

This is One Train Which REALLY Jumped The Tracks! 

George@Colonel's Workshop-Havertown PA

Re: Grizzly customer service

#22

Make'n anything exciting today ?

steve mackay

Re: Grizzly customer service

#23

All I wanted was to compliment Grizzly!

doug f, san clemente, ca

Re: Grizzly customer service

#24

Jim DeLaney, Austintown, Ohio

Re: All I wanted was to compliment Grizzly!

Jim DeLaney, Austintown, Ohio

Yeah. Too bad the 'compliment' took such a terrible turn.

I've dealt with Grizzly numerous times over the years, and have always gotten great service from them. In the very early years, some of their products left something to be desired, but they rapidly improved, and for quite some time now, their products have been just as good - maybe even better - than most of their so-called 'brand name' competitors.

I won't hesitate to buy a Grizzly tool today! Good products, and as you've said, good customer service.

Re: Grizzly customer service

#25

(Message Deleted by Poster)

Chuck Lenz