Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Woodworking tools and cutting stone

Posts

Woodworking tools and cutting stone

#1

Woodworking tools and cutting stone

Simon St.Laurent - Dryden, NY

I've been building a walkway out of a pallet full of 2" thick bluestone that I bought years ago. Mostly I've been able to find random pieces that fit, but I've come up to a few situations that look like they really need some trimming.

I had some folks build steps with it a few years ago, and they cut the stone with a worm-drive Skilsaw and a diamond blade. It was slow, loud, and dusty, but worked well.

I'd like to do the same, but my only circular saw is a Festool, purchased in more optimistic days of larger budgets. The Festool's variable speed seems ideal for this application, but I see that they don't sell stonecutting blades or discuss that option, so I don't think they encourage it. I'm not excited about ruining that saw on stone if it's a risk.

At the same time, I'm not thrilled about the prospect of buying a new circular saw for stone. I don't think this is a case where a cheapie will likely be effective for very long.

Any suggestions?

Re: Woodworking tools and cutting stone

#2

Re: Woodworking tools and cutting stone

Lee Schierer McKean, PA

Instead of risking an expensive saw. I would invest in a cheap saw and let the stone chips fly. If the cheap saw dies you won't be nearly as upset as you will be if you ruin the Festool saw. Two cheap ones still won't equal the price of a new Festool saw.

Lee

Re: Woodworking tools and cutting stone

#3

To the rescue

bill tindall

1. Yes you do want an expendable saw for this task. Visit local flea market and get a saw, or......

2. I think a better option is an angle grinder with a diamond blade, but probably not for 2" material, but for tile this is the way to go.

3. The best option is to rent a gas powered, manly diamond saw, either stationary or portable. If you can lift the pieces then the stationary kind with a 14" blade will mow through the rock with ease and with water lubrication you won't be shrouded in a cloud of dust.

4. Or, if you have but a few to do and they can be moved readily, find a mason working nearby and get the mason to cut them on a saw like described in #3.

Re: Woodworking tools and cutting stone

#4

Ellis Walentine

Power is an issue, too

Ellis Walentine

The landscape guys seem to use gas-powered circular saws, with rather large blades. I suspect they have more power output than a wood-cutting skilsaw. You might look into renting one of those gas saws.

Ellis Walentine

Re: Woodworking tools and cutting stone

#5

Re: Woodworking tools and cutting stone

Gary Smyth

Rent a big stone water cooled cutting saw for a day and you pay for only the abrasive you used when cutting (or buy a blade). (If you want a rough edge chisel it later). Return the saw and you don't have to worry about ruining anything. Get the right tool for the job! It's faster and cheaper and not so hard to manage when cutting

Re: Woodworking tools and cutting stone

#6

Re: Woodworking tools and cutting stone

John Veerkamp

Stihl and others make a masonary cutting saw, used to cut relief in sidewalks & driveways. They are readily available at rental shops.

Re: Woodworking tools and cutting stone

#7

Find a used saw on Craigslist or pawn shop

Grant in Iowa

Suggest you find a used saw on Craigslist or perhaps a local pawn shop. Around these parts I just saw a Porter cable saw that was pretty well used for under $40 yesterday. It would work fine for that application, and be a handy saw to have for other utility purposes. Check end play and blade wiggle on any saw you consider buying this way, however.

I have used my Milwaukee circular saw many times with a diamond masonry blade. Works fine, doesn't seem too hard on the saw, either. I do blow the dust out of the motor when I am done, however.

I can't imagine using the Festool that way. Keep it nice for a lifetime of cuts on wood.

FWIW,

Grant in Iowa

Re: Woodworking tools and cutting stone

#8

Re: Woodworking tools and cutting stone

Barry Irby

I don't buy much from Harbor Freight because I think most of their stuff is crap, but OTOH I don't buy Festool's stuff either because I can't afford it, but it's at the other end of the spectrum. You might look at Harbor Freight and buy a cheap saw or grinder and treat it as a disposable.

And, Renting as suggested by others is a good idea. If you can find a wet saw that you can manage it will do a great job.

And, You might be able to cut the stone by hand. Lay it on a bed of sand or soft dirt, draw a line on it and peck away on the line with a hammer and chisel until you break it. I have done this, but it was really slow and for me hit or miss.

Re: Woodworking tools and cutting stone

#9

do have an angle grinder

Simon St.Laurent - Dryden, NY

I don't think it'll cut through 2", but it might cut enough to make it easy for me to finish the cut. That's definitely something to think about as I ponder all these options.

Re: Woodworking tools and cutting stone

#10

these are great suggestions

Simon St.Laurent - Dryden, NY

I like the options of having someone else cut the stone, or renting a better tool, but the fun part with this is that I'm not going to be doing all the work at once. That may yet prove to be the right answer, though.

It sounds like the most likely options are to try my angle grinder or get a saw that's strong enough to do the work without being so precious I worry about destroying it.

I'll let you all know how it goes!

Re: Woodworking tools and cutting stone

#11

Jesper, Denmark

Re: do have an angle grinder

Jesper, Denmark

You do not have to cut al the way through the stone. A nice deep groove with the angle grinder, and you can break the rest cleanly. If the stone is really thick, another grove on the back side will help.

If you need a cleaner edge, grind the edge with the angle grinder afterwards.

Re: Woodworking tools and cutting stone

#12

Don't need to cut full thickness...

John in NM

Only half thickness each side :D

You can also score both sides and whack it with a brick chisel. On anything slate-like, you'd want to score deep relative to the thickness you're breaking, leave less than 3/4" to snap on a 2" stone.

Much as I hate to recommend Harbor Freight, you can get out fitted there to try it out for under $20. Stay away from their hammers though, sometimes the heads are cast iron.

Re: Woodworking tools and cutting stone

#13

Small job, don't need the big saw...

John in NM

Just a cheap skilsaw will do if you don't go with the grinder. The pros use those big saws because they don't want to buy new stuff every couple months. Trick with diamond blades is to not cut too fast. They don't need a lot of torque unless there's a lot of blade in the cut, and you won't have a problem there.

We've done three foundations with local sandstone and an angle grinder, couple chisels, a drill, and some feathers and wedges (those are for splitting big chunky rocks). Cutting stone puts much less strain on the grinder than grinding steel does, so a regular circular saw will do the job and then some.

Re: Woodworking tools and cutting stone

#14

Re: Woodworking tools and cutting stone

FredD

Do like the Stone cutters do , buy some wedges and feathers from a Masonry supply house or the place you bought the stone, and a 1/4"Masonry bit.

Mark a cut line on the Stone . drill it every foot or less , insert the Feathers and Wedge in each hole , lay over a Angle Iron point up and tap the Wedge down with a Single Jack and Voila. Not a glass smooth cut , but very satisfactorily for Stone.

For a somewhat uniform rough edge , you can bust the leading edges with the Single Jack by striking at a angle. No fuss or or muss and no ruined Skilsaw

FredD

Re: Woodworking tools and cutting stone

#15

Re: do have an angle grinder

Howard Norman-Prescott, AZ

I purchased a wet diamond saw from Harbour Freight several years ago that I use for such purposes. I have a diamond blade on an angle grinder but it's cut is less than 3/4" due to the way the saw is set up.

The wet saw is the best option. If you have just a few cuts I would think taking the stuff to someone that has a wet saw set up would be the best choice. If you have more than a few cuts I would probable rent a wet saw if it was me.

Re: Woodworking tools and cutting stone

#16

Here's a saw I've been considering *LINK*

Craig Daymon

I've had some projects in mind that involved cast off granite from counter top makers. I found DeWalt (and actually several others) have hand held wet saws. I've included a link to a page for a company that sells a variety, including the DeWalt. I'm certain a search would find many others. I searched on "hand held wet saw". Note that the DeWalt says that it comes with a blade meant for granite.

The price range seems to be about $50 on up, with the DeWalt about $190 and one from MK (who seem to make a lot of wet saws) at about $120.

-Craig


Hand Held Wet Saws

Re: Woodworking tools and cutting stone

#17

Re: Woodworking tools and cutting stone

Larry in NW OHIO

You didn`t say how big your stone other than 2" thick. When I was putting down 4x4" stone edgers and needed to cut one I would use my, hold on to your pants, Unisaw. I put a stone cutting blade on it and a piece of cereal box cardboard on the saw top to keep from scratching the top. I`cut 2" on one side and turn it over and cut the other side. Of course I took it very easy at first, but after I got the hang of it, it went quicker. after each cut I cleaned the top off to keep the stones from getting under the piece of cardboard. Also after a few cuts I would blow the inside out a little, just a precaution. Larry