Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Glue for new bandsaw tires

Posts

Glue for new bandsaw tires

#1

Glue for new bandsaw tires

doug f, san clemente, ca

So I've got my new tires (Delta original replacements, no one seems quite sure if they're rubber or polyurethane, even the folks at Delta) and I'll be mounting them in the next day or so.

I know everyone has a favorite glue for tires, but I've also heard proponents of plain old shellac as the adhesive. Much, much less expensive and easier to use. So, with all the knowledge out there, is there anything wrong with just using shellac? Seems like kind of a no-brainer, but I'm sure I'm missing something.

Thanks for the help, once again.

Doug

Re: Glue for new bandsaw tires

#2

Re: Glue for new bandsaw tires

Gerry in North Surrey

I didn't use any glue when I replaced the tires on my old (1946) General. I cleaned up the wheels with a wire brush and put on the tires. Worked for me.

Gerry

Re: Glue for new bandsaw tires

#3

Do you need glue??

Lee Schierer McKean, PA

The tires I replaced on my Father's saw weren't glued on and the new ones didn't call for any glue. Are you sure you need glue for your tires?

Lee

Re: Glue for new bandsaw tires

#4

Yeah, it looks like it...

doug f, san clemente, ca

The old tires were glued on, but I can't figure out what it was. So, in keeping with my Bible (Duginske on Band Saws), if the old ones were glued, glue the new ones.

I think I'm going to try shellac and see how it works. Very thin and just a little sticky.

If there are any problems, I'll be back and let all of you know.

Thanks for the replies.

Doug

Re: Glue for new bandsaw tires

#5

Re: Yeah, it looks like

Mark Mandell - Gone Round In Jersey

a job for . . .

DEwaxed shellac

mixed to at least a 2 pound cut

3lb cut even better; more stick and more "open" time

Clean inner surface of tires beforehand

Re: Glue for new bandsaw tires

#6

Re: Yeah, it looks like

doug f, san clemente, ca

Thanks, Mark. That's exactly what I used and it seems to be working fine.

Time will tell.

Doug

Re: Glue for new bandsaw tires

#7

Re: Yeah, it looks like

Robin Corell in Atascadero CA

If the tires are neoprene rubber you need to use glue. if they are urethane they do not need glue. Urethane tires from Delta are usually orange. I have used shellac as glue and prefer it to contact cement for several reasons. First it is easier to remove the old glue if it is shellac. second is that the shellac acts as a lubricant to aid in getting the new tire on and it cleans up (hands) easily. It may be unclear from my statement but with shellac you paint the shellac on the tire and the rim and then stretch the tire onto the rim. It is important that you allow 24hrs for the shellac to dry before crowning the tires. The other nice thing about shellac is that if a tire starts to come off you just slap a bit of shellac on the loose part and let it dry over night. I had this happen about 6 years after replacingt a tire and it held till I sold the saw 8 years later. I have always used zinser prepared 3 lb straight out of the can.

Robin

Re: Glue for new bandsaw tires

#8

Re: Yeah, it looks like

FredD

If your tires are rubber ,like a set I replaced on a Delta bandsaw, I would think after awhile the Shellac not being flexible like the tire will fail .

When Delta had a store in Oakland the guy who sold me the replacement tires said to use 3M Weatherstrip glue , comes in a tube and it has a lot of applications.

FredD

Re: Glue for new bandsaw tires

#9

Jim DeLaney, Austintown, Ohio

Re: Glue for new bandsaw tires - NONE!

Jim DeLaney, Austintown, Ohio

My old 14" saw is on its third set of tires in thirty years. The originals weren't glued, so I didn't glue the replacements, either. Originals lasted about 12 years. First set of replacements (rubber) lasted about fifteen years. The current set (urethane) will likely 'see me out.'...

Jim D.

Re: Glue for new bandsaw tires

#10

Rick L

Re: Delta 14" tire needs no glue...

Rick L

Other brands do but in my 20 years of machine repair I've never had to glue a Delta tire on. When they slip it's time for a new tire.

Re: Glue for new bandsaw tires

#12

LV - no glue needed

North of the border

http://www.leevalley.com/en/wood/page.aspx?p=56043&cat=1,41036,56060,56043