Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

*** SURVEY: THE IDES OF JULY *** *LINK*

Posts

*** SURVEY: THE IDES OF JULY *** *LINK*

#1

Ellis Walentine

*** SURVEY:  THE IDES OF JULY *** *LINK*

Ellis Walentine

Well, folks, that time has rolled around again -- time to take the pulse of our visitors with another pithy survey question, number 65 (yow! eleven years!) in our ongoing series of plebiscites that is published bi-monthly by Woodworker West magazine.

Coincidentally, Ron Goldman, the editor of Woodworker West, was just here at HQ with his wife and a friend from the UK for a visit this week. We found time between their obligatory visits to Nakashima world, the Mercer Museum, Hearne Hardwoods and the Wharton Esherick Museum, to contemplate the next survey question. We decided to keep it really simple:

What woodworking activities did you engage in this summer? This might include projects, shop activities, notable books you read, shows or events you attended, or anything else woodworking related. Inquiring minds want to know, so we can mercilessly condense your answers and pass them on for publication in the September-October issue of Woodworker West.

Thanks in advance for participating!

Ellis Walentine, Host


Woodworker West Magazine

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#2

JL

Re: *** SURVEY:  THE IDES OF JULY ***

JL

Let's see.

I have built two sets.

1) "Southern Hospitality"

2) "Fiddler on the Roof"

I have built numerous props.

I am designing a cradle - construction to start whenever I get through with my US Census work. You can kick through a lot of design ideas while driving through the countryside.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#3

Re: *** SURVEY:  THE IDES OF JULY ***

Don Orr

My highlights so far have been the AAW Symposium and building a canoe paddle which is almost ready to get wet.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#4

Re: *** SURVEY:  THE IDES OF JULY ***

iew

I am partially re-wooding my Model T. Yikes!!!

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#5

Sounds Suspiciously

Mark Mandell - Gone Round In Jersey

like "What I did on my Summer vacation." :D

Anyways,

Finally got my lathe and accessories functional after a year's hiatus, and have begun turning out roughed items. Since there are no exterior maintenance jobs scheduled this year, and since the basement flatwood shop remains packed with Doctor Daughter's stuff, the only other wood activity this Summer will be replenishing the firewood pile for next season.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#6

Re: *** SURVEY:  THE IDES OF JULY ***

steve mackay

Actually, same stuff (models & awards) but more flavors. With ARMY re-baseing, Fort Bliss is headed to being one of the largest in the world with the CAV moving in in a HUGE way. While I've been Air Defense focused for ten years, now my horizons expand to Cavalry, Artillery, Armor and the many support units. Very exciting to be working on new stuff. Part of the fun of my gig is the R&D and creeping around the new units after design information. WITH Millitary ID and permission of course ! Maybe with the expanded audience I'll FINALLY start getting rich off this gig ! Yea, right.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#7

Re: *** SURVEY:  THE IDES OF JULY ***

Lee Schierer McKean, PA

So far I've:

* built 3 model "A" wood toy cars

* repaired a spindle on an antique kitchen chair

* installed a new outside door including interior trim

* made a new threshold strip for my sister to go from her wood floor to a tiled floor

* worked on plans for a loft bed/dresser/desk unit for my oldest grandson

* made a replacement oak chair arm for some friends

* finished off some deck skirt trim

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#8

Re: *** SURVEY:  THE IDES OF JULY ***

Larry in NW OHIO

Not to much in the way of building something but rebuilding. We redid the main bathroom, so I redone the cabinent, made new floor mouldings, and other things that go with redoing a room. Now need to start on the other bathroom. Larry

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#9

Re: *** SURVEY:  THE IDES OF JULY ***

George Colonel's Workshop-Havertown PA

Good Afternoon Ellis,

My chief project is ongoing from the winter effort. I am making 5 chess boards on cabinets with opposing drawers, and one board on chess table plus chess pieces for each set. Woods used for the boards and cabinets are primarily maple and mahognay. The chess table is cherry. Pieces are of scrolled and lathed poplar and are of two basic sizes and incorporating four different designs. These sets complement others previously made for my oldest children, now being used by their children.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#10

Clint Searl

Re: *** SURVEY:  THE IDES OF JULY ***

Clint Searl

A couple pair of Heywood-Wakefield inspired night stands, so far. One pair copied in cypress and the other pair more loosely interpreted in maple. Working on a natural edge maple bench. Gonna make a trestle base in cherry for an already completed dining table top. Planning a storage/presentation case in river recovered cypress for an antique Chinese porcelain statue. Couple coffee table projects in the wings

I seem to get more woodworking done when the weather is hot and sticky, because my shop is AC'd.

Clint

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#11

Re: *** SURVEY:  THE IDES OF JULY ***

Bill Tindall

With summer less than 1/3 over would that be what will you be doing?

Anyway, heat drives me indoors to work in the shop. Summer is a peak woodworking time for me. Also I attended SAPFM meeting and will be at IWF.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#12

Re: *** SURVEY:  THE IDES OF JULY ***

Ron in Sterling, CT

Well 22" of water in my basement shop in April required removal of a lot of tools, lumber, etc.,etc. I just recently got the shop put back together, all the tools cleaned up, and ready to go. Thankfully, no tools were lost. Anyway, I have just started on my second four board blanket chest with hand cut dovetails from some 19" wide Eastern White Pine I had sawed up a few years back. This one will be for my son and his new bride. The chest, along with painting the house will keep this retired galoot busy for the summer.

Ron

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#13

None :-(

Thomas Skaggs, Foothills of Mount Level

For me it's a good news/ bad news thing. I'm shut down for a while until I sell my house (and shop) and build a new shop. The good news of course....a new shop! But that appears 2-3 months away. I hope I don't suffer from withdrawl!

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#14

Re: *** SURVEY:  THE IDES OF JULY ***

Paul Blackwell

Don't know if it makes a difference in the placement of the squares relative to the drawers, but the pieces are set up wrong in the picture. The rule is "light to the right" refering to the orientation of the right hand corner square. It should be a light colored square.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#15

Re: *** SURVEY:  THE IDES OF JULY ***

Paul Blackwell

I completed a lectern of solid walnut at the request of a grand daughter who wanted her class to honor a favorite teacher. Also completed a quilt rack from a Wood magazine design and a keepsake box for a grandson's birthday. I have started another lectern which will be a gift to the local historical society, but this has been on hold due to ongoing problems with my dust collector motor.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#16

Re: *** SURVEY:  THE IDES OF JULY ***

Charles Yawn

Repaired the outside front entrance to our house. Instead of tearing out the entire wood structure and replacing it for a few thousand dollars, I elected to remove the rotted wood parts and replace them. Took a while since some of the sections were somewhat intricate designs which required a lot of cut and try. Had the tools and the lumber and the time, and it worked. Saved a lot of money and had fun.

Charles

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#17

Re: *** SURVEY:  THE IDES OF JULY ***

AZ in Colorado Springs

Along with some friends, I built 10 double-decker cribs for an orphanage in Haiti. The cribs are made from 1/2" plywood, 1x poplar stock, and dowels. The cribs are 48" wide, about 22" deep, and 73" tall. The lower bunk sits 13" from the floor (with about a 6" mattress) and the upper bunk starts 43" from the floor. The fronts of the cribs are made of 1x2 poplar and 5/8" dowels. On the inside of each side is some 1x4 poplar, into which is routed a 3/4" groove. The tenoned ends of the front "gates" ride up and down in the grooves to allow access to the bunks. There are some additional bits of 1x2 poplar to allow the sides and backs to be screwed together, and to support the plywood mattress supports. There are slots cut into the sides for each of the upper and lower berths to let in light and air circulation (the ends of the slots cut with a 2" hole saw and the material in between removed with a jig saw, and then the opening smoothed with a 1/8 radius roundover bit on both sides of the plywood). These cribs are similar to 25 units we built in 2006. They'll be painted and assembled when they reach Haiti.

There was a shipping delay when the cribs were ready, so, in the meantime we built an exam table for the infirmary -- 34" tall, 24" deep, and 72" long. Two lower shelves, the sides and back enclosed with 1/4" plywood, three locking doors across the front, and the top is upholstered with some foam padding and naugahyde type fabric from a local retailer.

All these items and other donations left Colorado Springs a couple of weeks ago.

Cheers

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#18

Ellis Walentine

Let's publish the crib design

Ellis Walentine

... and maybe some WoodCentral folks can get some local efforts started. What are the details?

Ellis Walentine, Host

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#19

Paul Kramer

Re: *** SURVEY:  THE IDES OF JULY ***

Paul Kramer

I was commissioned to build six pieces of furniture for my daughter's college apartment. I've completed the bed with head board and I will be done with the dresser in a couple of weeks. Just a coffee table, mirror, TV table and night stand to go. Will I be done by the end of August? I really don't know but I think I have a few drives up to college to make deliveries in my future.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#20

William A. Roland

Re: *** SURVEY:  THE IDES OF JULY ***

William A. Roland

It may not be fine wwing but I am in Kansas City, MO helping build a new chapel for the Midwestern Baptist Theological Center. Putting up wood studs is considered wwing, right?

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#21

Re: *** SURVEY:  THE IDES OF JULY ***

George Colonel's Workshop-Havertown PA

Thank you Paul,

I'm going to let my kids solve that problem. Easy enough to fix.

George

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#22

Re: *** SURVEY:  THE IDES OF JULY ***

Brad Genet

I built a sofa table w/ two drawers and a lower shelf with tapered legs. I'm also working on building a shop cart and a router table. All out of a friends shop, while I live in an apartment, while my house is being built. In the new house I will finally have some dedicated shop space (I've been fortunate to have friends who have allowed me to use their shop space for the past 15 years). It will be a little over 200 sq. ft. with a golf cart garage door. It will be on the small side but the most space I've had so far.

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#23

Re: *** SURVEY:  THE IDES OF JULY ***

Jim Dillon

Ellis,

Whew, I got tired reading all the accomplishments of others this hot summer; I think I will take a nap :) . After thinking about it for several years, I decided to finally learn how to use Google Sketchup. As I am a slow learner, that has tied me up. I am using it to design a G&G style old newspaper container that will also, hopefully, serve as an end table next to my favorite reading chair. It has been fun, but I am waiting for the weather to cool off a bit to make some sawdust again.

Jim

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#24

Re: Let's publish the crib design

AZ in Colorado Springs

Ellis

Good idea. I'll talk to the ministry leaders about this, but I'd be quite surprised if they object. Also, I'll have to finish the drawings (it always turns out different than the original plan, if only because you forgot to pencil in some of the details at first), which is on my "to-do" list anyway. We do have a "photo essay" in work to provide instructions for the people who assemble the cribs in Haiti, but of course that is not the same as the construction plan.

Perhaps we should take this discussion off line, but if your e-mail address is shown somewhere here, I do not know how to find it :o)

Cheers

Andy

Re: *** SURVEY: THE IDES OF JULY *** *LINK*

#25

Lee Grindinger

Wow AZ, that's really cool!

Lee Grindinger

That's great stuff!