Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Need Help with Face Frames, Cabinet back, Carcase *LINK*

Posts

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#26

Re: A question for John....

FredD

I am not John , Barry , the term Box joint is a older term for finger joint and if you cut it on the table saw , you will spend a longer time cutting it then dovetails with a router. Done both many times , Dovetails are faster and stronger and have the advantage of a mechanical lock that all of those other practical joints do not.

Then on the other hand , I guess it could just be any joint on a box. ;-))

About the original posters skill level and budget , , it was exactly those concerns that led me to suggest a different way to go about the project.

If you have not tried fitting Cabinets in a awkward space at best , this in my view wouldn't be the design to start with.

Personally I don't care what type of joint you use in a drawer or the material it is made from.

Just refrain from saying it is just as strong and attractive , even though the butt joint is the weakest of all.

Tossing around terms like "practicality" is where the sayings like "it's close enough for Government work" or "it suits the Girls I go with " spring from.

In Cabinet work , the general areas are Paint Grade and Stain grade, the former the less expensive and the latter as much as you care to spend.

But.......either form or choice of materials would not dictate lesser attention to detail, or allowing sloppy work to intrude, the client regardless of their budget expect and deserve your best effort.

Aside from that , Bill has a good approach to using lesser hardwood shorts for drawer sides, the philosophy cuts down on material waste , it is one I use all of the time and it certainly wouldn't break the bank and in the process uses material to short for any thing but firewood.

The idea that the drawer is only open for a short time and not looked on as

part of the over all design and material selection is flawed, you would be surprised at the interest in drawer construction when the client is evaluating the skill set of the proposed shop.

That particular detail to attention has got me jobs where the competition were using lesser forms of drawer construction and charging less then me .

Lastly I know many part time and weekend woodworkers who strive to advance their design and skill set, just as though it was a primary career rather then a hobby and those are the people who inquire and learn and get my best effort to help them .

FredD

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#27

When evaluating a house....

Bill Tindall

When daughters asked me to help them in house buying the first thing I looked at was the drawers in the kitchen, for it was here that I had the best first impression of the quality of stuff in the house. Next was windows. Given the abundance of places that sell pre-made dovetailed drawer boxes into the trade others must look for this sign of quality too.

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#28

A finger by any other name...

John in NM

As Fred says, it's also called a finger joint. I personally don't find a box joint especially difficult or time consuming to cut, but as I haven't used a dovetail jig in 10 years or more, I can't make a direct comparison. I would have wagered that the box joint was quicker to cut, but to each their own.

Alert readers may notice that I did not advocate use of a box joint over a dovetail, or even make any claim that it was in any way a superior joint. I will admit to having a bit of a contemptuous attitude towards the "party line", where ever it is used.

I use it when I don't feel the application warrants hand cut dovetails, having the good fortune to not be building kitchens for a living, and having no desire to own a dovetail jig. So far the earth has not cracked and swallowed me up, people do not seem to cross to the other side of the street when I come along, and dogs still seem to like me ok. As near as I can tell, the only negative effect of using a box joint is limited to the dangers of getting into rather foolish arguments on the internet. A cautionary tale to be sure.

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#29

Update: Need Help with Face Frames, etc.

Brint in Richmond, VA

I've constructed the carcase

and and have cut and fitted the face frame for the top (bookcase) unit (see first post). I'm preparing to assemble the frame with biscuit joints, and was wondering if anyone had any suggestions about how to clamp the flat miter joints at either end of the frame member that will face the slope element of the carcase?

As always, TIA.

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#30

One option

Bill Houghton, Sebastopol, CA

One possibility is to glue blocks of wood to the edges of the face frame outside the miters, angled to direct the force of a clamp through the centerline of the miter, like this:


You then cut the blocks off and clean up the mess made by the gluing. If you're scribing the face frame to those walls, the cleanup step might well be taken care of by the scribing; and, anyway, wouldn't be visible.

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#31

Re: One option

Brint in Richmond, VA

Thanks, Bill -- I'd forgotten about that option, and it looks like a winner. Can I attach the glue blocks with hot-melt glue, or would that not be strong enough?

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#32

Hard to say

Bill Houghton, Sebastopol, CA

Myself, since the edges of the face frame won't be visible, I'd use regular PVA white or yellow glue. Better to have a little cleanup to do than to have the block come loose in the middle of the glue-up.

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#33

Re: One option

David Hay Denver

Another option would be to tack a thin strip of wood to the glue block that extends back along the face frame a bit. This would allow you to clamp the glue block to the frame part before clamping the two pieces together.

David

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#34

Re: One option

Brint in Richmond, VA

Very cool -- between you and Bill, my angst has been completely eliminated. :D

Thanks VERY much for the help.

Re: Need Help with Face Frames, Cabinet back, Carcase *LINK*

#35

Pin Nailer

charlie belden

Oldest son does a lot of trim out. I gave him my GREX pin nailer to try. Now that he's used it on several jobs and discovered the value of a good, maybe the best, pin nailer he's told me I can borrow it back any time - as long as I return it immediately after use ; )

No puttying over finishing nails, no splitting - great for prefinished sticks - quick, easy, accurate and no marring - as close to invisible as possible while still doing what it's supposed to do - hold things in place - 'til the glue dries. Now his boss is getting one - since my oldest knows better thanto lend- a borrowed tool - that he REALLY likes,