Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Ryobi dust collector

Posts

Ryobi dust collector

#1

Ryobi dust collector

Carol Reed, Strawberry, AZ

I have an old but goody Ryobi dry vacuum, the one with the cardboard drum. It works just fine but the foam sleeve, filter bag and rubber band have disappeared! The foam filter and rubber band are still available but the filter bag is not; and a pricey replacement at that!

Anybody got a work around? The "cage" this all covers is a 6" diameter and about 6" height. Where might I get some foam filter and cloth filter material to fashion a new system?

Re: Ryobi dust collector

#2

Ellis Walentine

Maybe this will help... *LINK*

Ellis Walentine

I've used this outfit for other stuff and they were at least organized, if not necessarily the cheapest. You didn't mention the model # of your vac, so I don't know if it is included on this page of Ryobi vacuum and blower parts.

Good luck. In a pinch, you might be able to modify some other brand of filter.

Ellis


Ryobi Vacuum parts

Re: Ryobi dust collector

#3

Re: Maybe this will help...

Carol Reed, Strawberry, AZ

Tried there. No joy. Do have a new switch for my Hitachi SCMS coming from them, though.

Model number is IDV-28.

Re: Ryobi dust collector

#4

Re: Ryobi dust collector

John Veerkamp

Carol,

You might try the Shop Vac QSP filters. Mine is about that size. It might work even if not exact. Shop Vac parts are at all of the box stores and not too pricey.

John

Re: Ryobi dust collector

#5

Re: Ryobi dust collector

Larry in NW OHIO

Carol I had and Old MWard vac that had about what your talking about. I bought some that fit from Wal Mart. They are big enough to fit over the small filter on the big Craftsman shop vac. If you can`t find any I can send you one to see if they fit. I hope this will help. Larry

Re: Ryobi dust collector

#6

Re: Ryobi dust collector

Phil Joines

I would think a bag from any shop vac that fits over the bag holder would work. Also a piece cut from a truck inner tube of about the right size should work too.

Re: Ryobi dust collector

#7

Re: Ryobi dust collector

Larry in NW OHIO

Great Idea Phil, now if you would come up with a replacement for the foam, you`d be hitting 100%. Larry

Re: Ryobi dust collector

#8

Re: Ryobi dust collector

Carol Reed, Strawberry, AZ

Going into town today. Gonna buy a furnace filter, a hose clamp, and a replacement bag (if I can find one that fits.) I found a foam filter but it was for an 8" diameter, and I don't need foam, for this is a dry vacuum (cardboard drum).

I will harvest the filter material from the furnace filter and make the new filter sleeve. Cut to fit and edge glue. May have to experiment and see what will work. Then I will use the hose clamp to keep the bag and filter on the "cage."

I think that will work. Thanks, guys, for getting the thought processes fired up.

Re: Ryobi dust collector

#9

Re: Ryobi dust collector

Larry in NW OHIO

I`m a little slow here. Are you going to use the furnace filter instead of the Bag on the outside? If you found a 8" foam filter, could you use that by putting it on and take the extra and fold it back over itself and clamp it on top and bottom or as someone else said cut some innertube and made a rubber band. Larry