Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Last night's Presentation

Posts

Last night's Presentation

#1

Alan Young

Last night's Presentation

Alan Young

Hi Friends,

Well, It went OK last night. Interesting set-up- Well no GREAT set-up. I didn't take any pictures because I just didn't have time. Perhaps I'll go back. The facility is comprised of a huge area where students learn home building and construction. They are currently fabricating some lovely cottage style houses. When my son was in the program a few years ago they built some rather standard looking ranch homes-To one large corner of the facility is the dedicated woodworking shop. Some of the machinery is older but nonetheless the shop is beautifully equipped.-Panel saw, panel clamping jig, at least one Unisaw and an older 14" Rockwell cabinet saw, several lathes, a vacuum press,shaper, 4 or 5 4' square maple topped benches, numerous routers, clamps. large bandsaw (24"?) big Powermatic (I think) planer, jointer 8" or more , and pretty much anything a person would want at their disposal.

As far as my talk/presentation-Peter Beal's class is focused on cabinetry and Millwork. So my talk on custom furniture was a bit removed from the center of the curricula. It took place in one of the class rooms that line edge of the facility. There were about 8 students plus the instructor-Peter. I had at my disposal a computer hooked to internet and any other type of media source needed. I spent a bit of time showing them the Sketchup drawings I use to design my work. I was careful to emphasize the importance of full scale drawings as the best arbitrator in design when at all possible. The logistics of my small shop frequently push full scale drawings out of the picture. Peter has his students produce their f-s drawings on 1/2 plywood or particle boards.- (I really do need to go back and take some pics) My time slot was from 8 pm to 11:pm. I arrived a bit before 7. One student drives nearly 3 hours to get to this class!. He arrived around 7:15 or so and asked a lot of questions before the actual presentation- I was happy to answer them- although I found my self getting somewhat off track later when I couldn't remember if what I was about to say was something I had said to this student earlier and should repeat now for the class, or if I was just repeating myself-anyway that was neither here nor there in the long run as I repeated it anyway!

I brought with me my tall tea table, a recent carved and gilded coffee table and my Black Lacquered music stand. I also brought 4 turned and fluted legs that are going to be part of music cabinet, and a scale model cross for a proposed Liturgical Suite of Chancel Furniture that I hope to build some day. I talked about design process-as it relates to working with a client and basic problem solving and artistic intent. I was also prepared to demonstrate inlaying a design into a veneered panel, and to carve a fluer-de- lis. as it turned out there was no hands on type of activity but we did examine the furniture pieces in some detail and discussed techniques I used in the fabrication process. We spoke about pricing work and marketing via a web page and other forms of contact. Certainly only scratched the surface in most respects but it was a good experience for me and the class didn't fall asleep. My voice is rough as it's been since my radio days that rememberd speaking so-much for so long a period of time. I talked for the full three hours, then Peter and I talked and puttered around the woodshop for another hour and a half. I hit the hay around 1:30 so I'm dragging today.

I mentioned that my son took classes in this facility a few years ago. Here is a link with some pictures that give you a pretty good idea of the faculties capabilities. I do want to go back and get more dedicated shots of the woodshop area but you get a good idea of the tools at hand.

http://www.woodwardwoodworks.com/spenceratschool.html

Here is Peter Beal's personal webpage-

http://www.peterbealfurniture.com/Peter_Beal_Furniture.html

Take some time to look through the range of work. Very refined and inventive pieces found here.

-Alan

Re: Last night's Presentation

#2

Ellis Walentine

Sounds like a great evening, Alan

Ellis Walentine

I'm sure your presentation was inspiring to the students who attended. Thanks for the rundown and the links. Peter's work is very nice and he's very prolific, isn't he? Maybe he should stop by the messageboards sometime and lend his expertise to the discussions.

Cheers,

Ellis

Re: Last night's Presentation

#3

Re: Last night's Presentation

Thomas Skaggs, Foothills of Mount Level

Sounds like the presentation went well. I just hope you remembered to wear pants.

Your Pal,

Tom

Re: Last night's Presentation

#4

Alan Young

Re: Sounds like a great evening, Alan

Alan Young

Hi Ellis-

Not sure how "inspiring" it was as the last part of the talk they asked "So where do you see yourself going from here?"... I mentioned that it had been my desire to "retire" out of my day job at the University of Michigan in a few years (2-5?) and pursue this full time. That seems less and less likely to happen so I said my focus now is just try to improve on my techniques, keep learning and build as many pieces as I have opportunity. This is an interesting shift in focus as perhaps the goal to just become a better designer/builder replaces that of "doing this full-time". I probably have a better chance of achieving the type of finished work that I aspire to...Last night was probably more helpful to me than anyone else. I realize how much I've learned in the past 10-12 years-but more so-how much I don't know and the clock is ticking.....I will see If I can get Peter to check in here. Not sure how much On-Line activity he participates in but his knowledge and experience across the "board" so to speak is wide and deep. He would be a very helpful asset . I am looking forward to spending more time getting to know him and learning.

-Alan

Re: Last night's Presentation

#5

Alan Young

Of course I did- I wore my full woodworking attire

Alan Young

You and AJ should have been there!


Re: Last night's Presentation

#6

Jason Roehl in Lafayette, IN

Thanks!

Jason Roehl in Lafayette, IN

I've gotten a few chuckles out of this thread.

The National Sarcasm Society (Like we need your support) sign,

the quote on Peter's site, "no more of that tortured artist crap",

and then the post and picture to which I am now replying made me laugh out loud.

Hope you had a great time at the presentation and I'm sure you inspired some others--that often happens in ways you don't expect. What is often mundane and trivial to one person can be a beacon of light to another.

Jason

Re: Last night's Presentation

#7

Re: Last night's Presentation

Joanne in Point Pleasant, PA

I'm sure you were great and well appreciated. If you can get through 3 hours of talking (plus the hour or so with the early student) and the class was still attentive, you're ahead of the curve. Even though the class is working on construction of houses more than fine furniture, I'll bet you turned a few heads and got some of them thinking about new roads and shop creations. Thanks for the follow-up.

Re: Last night's Presentation

#8

Re: Last night's Presentation

George Colonel's Workshop-Havertown PA

Good Afternoon Allan,

Thanks for posting your adventure. Loved that bit about the National Sarcasm Society. Had I know about it, I would have founded a chapter years ago. It aseems to me a presentation like your own, does a world of good by introducing another different and interesting aspect to the field. My guess is that you will be invited back.

George