Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

New bed and night tables

Posts

New bed and night tables

#1

New bed and night tables

Nathan

Wish I could say I made this myself...


My wife found it advertised online. Somebody's mother recently died and they were liquidating her estate. We picked it up yesterday and reassembled it this morning. This is a pretty typical example of the kind of furniture that was being made here in the Czech Republic at around 1950.


The head- and footboards are laminboard (except for the curved sections of the footboard), and the rails (two on the sides and two in the center) are probably European beech. Of course, all surfaces are covered with beautiful veneer. There's a lot of hand work, too. For example the drawers in the night tables have hand-sawn dovetails on three corners and a tapered sliding dado for the fourth. In some places you can see where knot-holes in the veneer were repaired by hand as part of the production process.

The 1950s was a period of transition in furniture-making in this country. Engineered materials and basic machines were available, but the craftsman still used traditional techniques.

This was only part of the bedroom set the lady was selling. There were also two large wardrobes and a vanity - all beautiful - but this is all we had room for in our house.

Thanks for looking.

Nathan

Re: New bed and night tables

#2

Thanks for showing those pieces

Bill Houghton, Sebastopol, CA

Very interesting designs. I'm always intrigued by how different countries interpret different "periods" of design.

Also an interesting drawer construction. I wonder what structural or production advantage the one dado in the drawers had?

It's nice that they went to someone who can appreciate the effort of the builders to make a good piece of furniture with the materials and constraints they had.

Re: New bed and night tables

#3

Re: New bed and night tables

larry in kansas

Nathan I have a very dumb question for you, I`m well known for them? Are you living in the Czech Republic? If you mentioned that in one of your posts I`m sorry, but I`m very forgetful because I have kidney damage and are not working but about 40-50% and am told that can cause forgetfulness. I think it`s really something that WC has people from all over the world. That really says something for Ellis and his volenteers that keep WC the best site for woodworking. I love reading all your posts. Thank You Larry

Re: New bed and night tables

#4

Yes

Nathan

Hi Larry and everyone:

Thanks for responding. Sorry I should have mentioned that I live and work in the Czech Republic. Been here for almost 20 years. (Still have my U.S. citizenship, though!) For the past 9 months or so I've been doing a cabinet-maker apprenticeship and before that for several years I tried to learn woodworking on my own.

There are some differences in how woodworkers approach their craft between the U.S. and Europe, but . . . wood is still wood.

Nathan

Re: New bed and night tables

#5

Night table drawer details

Nathan

Hi Bill and whoever's interested. I should have posted detail photos of the night table drawers - allow me remediate that.

Here's how the drawer fits into the night-table carcass:


The drawer fills up one part and there's an open shelf-like space off to the side. The divider between the drawer part and the shelf part is not visible unless you open the drawer. So you see, you can dovetail the side of the drawer to the drawer front on one side, but not on the other. Hence the sliding dado:


And here are some details of the handcut dovetails. It is very precise work but whoever did it evidently wasn't concerned with the appearance. At the time, dovetails were not seen as a "badge of honor" - just a regular joint like any other.


And the other side - you can see the laminboard endgrain in these shots:


In the back he didn't bother to clean up the hide glue squeeze-out:


Re: New bed and night tables

#6

Thanks.  That makes a lot of sense now

Bill Houghton, Sebastopol, CA

It's a far better aesthetic decision than bringing the divider forward would have been.

It's always interesting to see the production decisions made* - the uncleaned hide glue and suchlike. I was also struck by the scribe line for the dado that implies some handwork in that particular joint.

It looks like they were getting the laminboard already assembled and veneered, and making the drawers from there, as if it were solid wood.

It's impressive that such a weak-looking joint as that dado, which I would expect to have minimal strength in the direction of the drawer's pull, held up for 60 years.

Thanks, Nathan, for bringing this and your other observations about the trade in the Czech Republic to this community. It adds an interesting and valuable perspective.

*I spent a very few years in the trades in my youth - just enough for me to appreciate the necessity for making decisions on the fly about "good enough" work. As my son says, the trick is remembering which standards have to be maintained - and, by implication, which ones can be loosened.

Re: New bed and night tables

#7

Re: New bed and night tables

FredD

Nathan , that reminds me of Art-Deco , nice looking veneer and the floor isn't half bad either. ;-))

Keep up the posts , very interesting.

FredD

Re: New bed and night tables

#8

Sliding dovetail, not dado - sorry

Nathan

"It's impressive that such a weak-looking joint as that dado, which I would expect to have minimal strength in the direction of the drawer's pull, held up for 60 years."

I used the wrong term, sorry. It's actually a sliding dovetail. To be exact, it's a dado on one side and a dovetail on the other. It's definitely a handcut joint, like the other dovetails.

Master had me cut one of those joints awhile back. You have to have a special saw for the sides of the groove:


plus an Old Woman's Tooth plane to dig out the waste, and a sliding dovetail plane for the "male" piece. You can either put the dovetail on only one side (as in this case) or on both (rare).

Handcut sliding dovetails are generally tapered, because if you don't taper the joint is almost impossible to assemble without excessive hammering.

So, it's actually not a weak joint like a dado. Sorry again for the confusion.

Re: New bed and night tables

#9

Dovetail dado

Bill Houghton, Sebastopol, CA

I've seen them referred to in some literature as a "dovetail dado" - so you were right both times!

That does make more sense - it's a pretty steep dovetail, but even a slight slope was obviously enough to keep the drawer intact.

Re: New bed and night tables

#10

Re: New bed and night tables

Larry in NW OHIO

Nathan You have some beautiful furniture there, it`s to bad you couldn`t get the whole set. It`s interesting that you came from the states, if you wouldn`t mind, how did it happen that you got over there, and got such a great job. Of course you needn`t say if you don`t want to. Larry