Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Pressure washer

Posts

Pressure washer

#1

Pressure washer

Larry in NW OHIO

We built a new deck last year, out of Trex, and now that warm weather has come we noticed that the wood look in the Trex shows dirt fairly bad. So I think I`m going to need a bigger pressure washer. We`re leaving for Florida with our kids and grandkids Sat. so I can think about it for a couple of weeks or so. I`d like something fairly inexpensive, not cheap. Something that will do kind of a wide sweep, so it doesn`t take all day to do the deck. I`d prefere electric. Any suggestions? Thanks to all. I`d like to visit someone in Florida, if we have the chance. Larry

Re: Pressure washer

#2

Re: Pressure washer

Mark Mandell - Gone Round In Jersey

"fairly inexpensive, not cheap. Something that will do kind of a wide sweep, so it doesn`t take all day to do the deck. I`d prefere electric."

Not possible Larry, as those are mutually exclusionary criteria.

The limit on homeowner-geared 115v electrics are about 1600 PSI. With a wide setting the effective pressure is spread out so you won't be zipping right along. Plus, as with anything else, if you buy for less, you get cheap; cheap gun, cheap build, and, most importantly, cheap pump.

I had a Karcher (bought for the name rep) that lasted 4 years with good care. Service guy offered to rebuild it for $125, I declined, as I had taken very good care of it. I shopped the machines then bought a gas ExCell unit from HD, with 2800 PSI, a Honda GX engine, and a CAT pump. A world of difference! Sure, I'm burning gas rather than electrons, but I have a lot to do, and I can now do the 1,000s.f. deck + 800s.f. paver patio + 150 lineal feet of 4' wide deck-walks in less than a Saturday and have it really clean.

Had a neighbor who lost his job and had to move. Before he left we had them over for dinner. Next day he dropped off a Husky (HD) 1600 electric washer which didn't work well (he said) that he thought I might be able to get running since he didn't want to pitch it but couldn't take. I took it apart, fixed the det reservoir, and replaced the GFCI plug. Does okay for washing the cars and stuff.

Re: Pressure washer

#3

Re: Pressure washer

Larry in NW OHIO

Of course I`ll take your work for it, since I know next to nothing about them. I don`t want cheap, something that`ll quit on me in 4-5 years. So I`ll go for good for whatever. I`d like opinions w/approx prices. Thank you Larry

Re: Pressure washer

#4

Re: Pressure washer *LINK*

Lee Schierer McKean, PA

Mark, which model did you get the VR2522 or the XC2800, neither seems to have a Cat pump...


ExCell Pressure washer

Re: Pressure washer

#5

Neither

Mark Mandell - Gone Round In Jersey

Mine is a ZR2800.

6.5 hp Honda GX

Yes, the baby blue pump is a CAT replete with sight glass and oil fill & drain plugs.

I change the oil in both engine and pump every year which translates to about every 35-40 hours of use counting cleaning the driveway, etc. Oils get changed at "put-away" in the fall along with filling the pump chambers with RV-type antifreeze.

m

Re: Pressure washer

#6

Oh My Word

Mark Mandell - Gone Round In Jersey

is not the end-all on the topic by any means. You can do a lot more digging than this. One good source of info is local rental yards, including the big box rental desks. Ask them what brands they use for rental units and how they hold up. Call several servicing firms for the same information.

Re: Pressure washer

#7

Hmmmm

Lee Schierer McKean, PA

Apparently the ZR2800 is a discontinued model, any other suggestions?

Lee

Re: Pressure washer

#8

Suggestions

Mark Mandell - Gone Round In Jersey

Yeah, mine's been discontinued, but go to Northern Tools, Southwest Fastener, and other PW sections on websites and look for models in your target range with combinations of motor and pump brands. You'll get a sense of quality by the range in pricing.