Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

RBI Scroll Saw Question

Posts

RBI Scroll Saw Question

#1

RBI Scroll Saw Question

Thomas Skaggs, Foothills of Mount Level

I don't often need a scroll saw but there is a local ad for one. It's an RBI Model #214 "Lightly used, excellent condition" for $100. Does anyone know this model? Good, bad, so-so? Thanks in advnace for any input.

Tom

Re: RBI Scroll Saw Question

#2

Re: RBI Scroll Saw Question

Robin Corell in Atascadero CA

The belief that a scroll saw will attract all the dust in your shop and keep all your other tools clean is a myth.

Not familiar with the model but I have an old craftsman and have used a Hegner and I can tell you that a quick change blade is a nice feature. My saw lacks a quick change blade system. I use my saw mostly for non wood. I modified a tungston carbide sawsall blade so I could cut G-10 with it. The last thing I used it for was some brass parts for a puzzle lock on a cabinet. for the breass I use jewlers blades. The quick change blades typicly have pins on the end. My saw clams the blade with a screw. With a pin mount blade I couldn't have done the things I listed so both systems have their advantages.

If you have the space to stash it except for the one time every other year that you use it then get it. Every time I use mine I am grateful I didn't break down and sell it.

Robin

Re: RBI Scroll Saw Question

#3

Re: RBI Scroll Saw Question

Kenny Heermann

Hello, I have had that model for several years, it has been a very good saw and I would buy another one. Hope this helps

Re: RBI Scroll Saw Question

#4

Bought it.

Thomas Skaggs, Foothills of Mount Level

Thanks for the info. I bought it last night and tried it out. Works very well. Don't need a scroll saw very often but for $100 it's worth it for the occassional convenience.

T.