Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Math guru needed.

Posts

Math guru needed.

#1

Math guru needed.

Keith Newton----Little Rock, Arkansas

I thought I had a link to a site that would give me the R of a circle with a given chord length and depth. I just cut that Bubinga board, which is 39" wide, and by bending a batten parallel to the ring, have determined that the chord depth would be 5".

What would have been the radius, or diameter of this tree?

Re: Math guru needed.

#3

Re: Math guru needed.

kgoring

81.05", if I understand correctly

Re: Math guru needed.

#4

Re: Math guru needed.

kgoring

81.05" diameter

Re: Math guru needed.

#5

Re: Math guru needed.

Robin Corell in Atascadero CA

looks like you got the answer but still don't know how to fish.

chord= the lenght of the chord

rise= the rise of the chord at the mid point or in your case 5"

[(1/2chord) squared + rise squared]devided by 2*rise= radius

I use this formula a lot in my own work.

Robin

Re: Math guru needed.

#6

Radius of arc

mdclor

=((((B5/2)*(B5/2))/B6)+B6)/2

Copy/paste this formula into cell B7 of a spreadsheet and have the chord length in B5 and the rise in B6. Robin gave it to you, but this might be a little easier to use.

Re: Math guru needed.

#8

Re: Math guru needed.

Alexandre Grigoriev

If you use an arc drawing bethod that employs two nails and two sticks at an angle, you don't need to know an exact radius.

Re: Math guru needed.

#9

Re: Math guru needed. 

mdclor

The "*" is used by excel as the multiplication symbol. When I took algebra, we used an "x" so the two are synonymous.

I make Mission style furniture so I use it to determine the radius of the arc that I want to make. Once I know the radius, I make an appropriately sized jig to draw the arc on the 1/4" ply or mdf that will become the template for drawing the arc on the stock. I also use the template to guide the router to remove the band saw marks. You can see a couple examples in this pic.


Let me know if any other questions.

Re: Math guru needed.

#10

Re: Math guru needed.

Dan Donaldson

The * represents multiplication. Other symbols you might see at times are the backslash / for division, and the carat ^ for exponents (ie 2^2 represents 2 to the second power)

Re: Math guru needed.

#11

Thanks All,

Keith Newton----Little Rock, Arkansas

I guess I have been out of school too long. This is the first time that I ever knew that * ~ = X. Now I understand the equation.

Considering myself a tree-hugger, I know how hard it is to get my arms around one that size. There was a little decayed sapwood on each edge, so I would like to think that the tree died of a natural cause before it was cut.

Re: Math guru needed.

#12

Funny You Should Ask

charlie belden

I'm doing two intersecting arcs multi-center pieces and I wanted the radius of each of the arcs of a piece I just did. Turns out I went through the math back in '05 for an arch over a wine cellar door.

The equation you're after is

R = ( C^2/8xO ) + (O/C/2)

Radius equals C squared divided by eight times O plus O divided by half of C

Where

C= chord length

O = offset distance from the middle of the chord to the circle of radius R

So - the diameter of the tree, given a chord length of 39" and an offset from the cord to the circle of 5" comes out to be about 81",

assuming the growth rings are a) close to perfectly round and b) perfectly symetric on center - which few trees are.

Re: Math guru needed.

#13

Re: Math guru needed. 

Andy Lincoln,in Dearborn,MI

Keith,

I read this thread last night and today was able to get into the shop where I had the book with this formula in it.I use it frequently.

r = (m� + �c�)/2m


Hope this helps,

Andy