Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Leyland cypress

Posts

Leyland cypress

#1

Leyland cypress

Bill Tindall

This note is vaguely related to woodworking. Leyland cypress are popular trees to plant for privacy screening and wind breaks. Green Giant arborvitae is a similar tree for a similar application which is more cold hardy, but less heat and drought tolerant. My neighbor just bought some 1 gallon sized for $6. These gallon size are nothing more than what is called "liners" in the nursery trade, that have been repotted in a gallon container. They can be bought mail order for $1-$2 each depending on quantity. The liners come in smaller pot fully rooted and ready to set out. I just bought 75 for about $1.50 each from Sunset Growers, a place I have found to be reliable.

Google search about any tree of interest followed by "liner" to find other sources of about any nursery stock you might want. "Leyland Cypress liners" for example. Liners usually transplant better than larger trees with little transplant shock. While they start out smaller after 5 years the tree I plant as a liner will usually be larger than a tree I planted as a potted larger tree.

Re: Leyland cypress

#2

Re: Leyland cypress

Barry Irby

Little one = Arborvitae, Grown up arborvitae = Western Red Cedar.

Of course, some of the Western Red Cedars they cut on the west coast are several hundred years old. They claim the lumber from the really old ones is better than from younger ones. So, don't count on planting liners and harvesting your own siding any time soon.

And, you are right about planting the liners and having them thrive better than larger potted plants.

Another thing. I have planted fifty or more small trees on my lot. Three have died. (Recently, more than that died, but I just removed these.) When I planted them, I teased the roots apart and spread them out. My son just slipped them out of the pots and sat them in the holes. On the ones he planted, the roots were snarled in a ball and never recovered. It was very obvious that it gave the trees a hard time. I had a maple in the front yard, planted by the "pros" before I moved in. A hurricane blew it over. Same thing. The roots were snarled in a ball and never got the spread they should have. (The tree was over twenty years old when the storm got it.) I am convinced it would not have been harmed if the roots had been untangled when they planted it. None of the other trees were hurt. I have a bowl I turned out of the root ball and you can see that the roots ere in a swirl.

Re: Leyland cypress

#3

parentage

Bill Tindall

The Leyland is a hybrid, as is the Green Giant. They each are supposed to top out about 50' but I keep a hedge of them pruned to about 10'.

Re: Leyland cypress

#4

Re: parentage

Robin Corell in Atascadero CA

Leland is a cross of monterey cypress and nootka cypress. where I live thay have a lifespan of about 15-20 years. with care thay can live longer but they are not the long lived trees of their parentage.

A similar shaped tree that may be better suited as a cultivar is deodar cedar, comonly called himylan cedar

Robin

Re: Leyland cypress

#5

Species choice and planting advice

Tom Dunlap

Leylands have some serious pest/disease problems as they mature. In most biomes the cedars will do better. Leylands can grow fast and thick so they do make a nice, quick, hedge. You'll never see cedars growing as thick or vertical. Whichever is chosen be sure that they aren't planted too close. Or...if you're using liners you can double plant and have the planting pattern chosen so that every other one is removed just as the branch tips are touching but before they start to shade each other.

Girdling roots is an epidemic in container grown plant material. This is a world-wide problem. Liners are grown in pots that are too small and they're kept there too long. Roots naturally grow in a radial pattern until an obstruction is hit. Then they turn aside. It doesn't take a lot of education to understand what will happen if the plants are grown improperly.

One current planting recommendation is to de-pot the plants and wash off all of the soil. Then tease the roots out into a natural fan. Dig a hole, it will actually be a basin..wide and shallow..that is the same size as the teased out roots. Use sticks to 'pin' the pot bound roots so that they return to the radial pattern.

A few weeks ago a tree defoliated on the campus where I work. I know the tree is dead so it was time to do root crown excavation to show my supervisors what is going to keep happening to many of the trees on campus. I had to use a pressure washer to excavate the soil. What a mess! I was surprised to find two rings of encircling roots! One was at the radius of a 20 gallon pot. Then, a little further out the next ring of roots was circling. These roots were SOLID masses like a stockade fort!

If you're interested in reading more about this epidemic search for 'stem girdling roots'. Over 90% of the container grown plants suffer from SGRs. A HUGE percentage of them will never even reach their 'middle age' years because the roots will fail. If cars were built like this the streets would be littered with wrecks and junk.

Tom the Tree Guy

Re: Leyland cypress

#6

contrary life span experience

Bill Tindall

I have heard of no life span issues here in TN. I have some that exceed your estimate and they show no sign of decline, just the opposite in fact. From all the information I have found they are a highly recommended planting for zone 6, especially in drier locations. The only problem I ever saw was once it went to 11 below zero and they froze to the ground, only to resprout and prosper in later years.

Re: Leyland cypress

#7

Depends on the source

Bill Tindall

While some nursery plants suffer from cramped roots the liners from Sunset did not. Clearly these liners were shipped at an optimum time in their growth. In my experience liners rarely suffer from cramped roots because they have been propagated to transplant into larger pots as soon as they are well rooted. Often liners are sold bare rooted having been dug from "free range" rows where the roots don't curl up. At least this is the case with fruit trees. I have much less experience with ornamentals. It's why I like to buy liners, in addition to them being cheap.

It's in the larger potted plants at retail nurseries that I fine crowded roots because the stock may have been held beyond its optimum sales time, like till next year. In this case I slash the roots into 4 quadrants and hope for the best.

Re: Leyland cypress

#8

I wonder.....

Barry Irby

The tree you looked at may have been planted in a hole that was the size of the second ring. If the soil were hard and dense and wet, they may have dug a holw that had hard slick sides and satt eh palnt in it with the roots girdled. They spread a little until they hit the undisturbed sides of the hole ant then htey turned as if they had hit the walls of a pot.

I power washed the maple that I had that fell in a storm. What a mess is right. I moved the dirt from the root ball to my person and high speed.

Re: Leyland cypress

#9

Re: I wonder.....

Tom Dunlap

Barry,

That isn't the case. I know how root systems grow and they don't grow in two concentric circles with both centers on the trunk.

I've shown pictures of the excavation to people and everyone can see the two pot sizes.

A very few fine roots escaped to grow radially. The reason the tree died was that the first batch of stem girdling roots got so large that they turned into tourniquets and choked off the cambium of the tree.

SGRs are very easy to identify even without doing soil excavation. SGRs have been well researched by arborists and presented to the nursery/landscape industry. This has been sort of a plea to change their practices. Some do but most don't. The big problem is that SGRs usually don't kill the trees for a number of years. By then the original planter is long gone. No one is around to shoulder the responsibility of producing hazardous materials. The burden for a solution then falls on the arborists shoulders. Sometimes excavation can work. Using an Air Knife or Air Spade to excavate allows us to do little damage to the roots. With saws and pruners most of the SGRs can be pruned. In many cases the tree will have a turn-around in one growing season. The color and density of leaves will be very different.

Slicing root bound balls has some success but not as much as teasing out the roots and cutting away the larger circling ones.

This can relate to woodworking of course. If the wood that is used for a project isn't stable or high quality the project will fail at some time. Wood that isn't dried right will degrade later ruining all of the work put into forming the project. Then what do you do? In the worst case the project gets scrapped. Had the wood been dried correctly the project would have a long, useful life.

Tom

Re: Leyland cypress

#10

Re: I wonder.....

Barry Irby

Years ago I knew JC Raulston who was the head of the Arboretum at NC State. (Its named after him now. He was killed in a car accident) He was quite the plantsman. Collected thousands of plants from all over the world and grew them in NC. About two thirds of them died. He said he did not consider a plant unviable in this climate until he had killed it himself. He was roundly criticised for killing so many plants. His response was that he had proven that the remaining thousands had now been proven to be viable in NC. Many people had sworn that most of them could not be grown there.

He collected as many redbud cultivars as he could find. The collection is fantastic.

He had much to say about planting and girdling roots. Wish I had listened more carefully and taken notes.

Re: Leyland cypress

#11

Tom...

John K Jordan

I read it was a bad idea to dig a hole and enhance the soil in the hole when planting. This reportedly encourages the roots to stay within the hole instead of reaching out into the surrounding soil. Any thoughts on this?

The way I usually plant trees is dig a really big hole with my backhoe (at least three to four times as wide as the b&b), cut open the burlap, then pack the removed dirt around the ball. I add some fertilizer on the top of the ground early the next spring. Is this OK, or should I try something different?

In the last few years I've set out 15 fruit trees, around 40 evergreens, dogwoods, and numerous shrubs (large blueberry bushes, etc). I've lost only two pine trees. I do amend soil with peat moss when planting blueberries since that's what is recommended on the label.

JKJ

Re: Leyland cypress

#12

Hunnert dolla hole!

Tom Dunlap

Put a $10 tree in a $100 hole and our grandchildren will enjoy the tree.

Amending soil is not usually recommended. Adding some good compost, maybe 15-20% would help to add organic matter and nutrients.

Digging the center of the hole with a hoe or even drilling isn't a bad idea. But you need to go in with a shovel to scarify the soil. Machinery will glaze the soil and change the structure so that water and roots won't penetrate back into the parent soil. As the soils go from sand to clay it is much more important to hand dig the edges.

Don't dig any deeper than the root mass. Shallower is probably better. Having the root crown just above grade will make for a happier tree. Especially in clay soils.

Taking the time to tease open the roots from any container grown plant will pay off. Most of the time you'll find that you have to dig a shallower but wider hole. This is much easier than digging deep.

Raulston was quite a guy! I know of him by reputation and friends who have connections to the Arb. The purpose of an arboretum is to be a test lab. Test and develop plants that are adapted to the region that they serve. If some die...such is life and death, they should never make their way to the market place.

Re: Leyland cypress

#13

Re: Hunnert dolla hole!

Barry Irby

I think it was Raulston that talked about "slick on Sides". Digging a hole with slick glazed sides. He said it was like a clay pot in the soil.

When challenged about bringing something like 6000 Plants to the Arb and having 4000 die, he was obviously thrilled that 2000 had survived. He was hoping for a few and almost a third made it. He actually said, "It's not dead until I have killed it myself."

My son went to state and has a degree in Horticulture. Got to spend many hours working in the Arboretum and had known Raulston for a long time before that. Unfortunately Raulston had passed on when he was there. Another person he got to know and take classes from was Michael Dirr. Dirr compiled the book "Woody Plants in the Landscape." When he started it he thought it was going to be a simply compilation of existing material. Said later that they discovered that as much as 85% of what we thought we knew was either wrong, unproven, or little more than old wives's tails.

And you are right. A high plant is a happy plant.

Have you seen the ring culture stuff? They were planting them on plastic in a ring in about two inches of soil. When you wanted to plant it in the landscape, you just scratched the surface and plopped the pancake of soil on top the ground and lightly staked the plant until the roots took hold. Really neat Idea. Know why it did not work in commerce? Shipping costs. You can get a lot more pots in a truck than pancakes.

Re: Leyland cypress

#14

Dirr is the Go-To!

Tom Dunlap

Every profession has a short list of Go-To's, Dirr is one for hort related things.

Pancakes??? Makes perfect sense! The myth of the 'tap root' should be on the same shelf as unicorns. Imaginary creatures! After storms or bulldozing what is coming out of the bottom of trees? Not carrot-type roots but a mass of large roots that go down a little ways then go horizontal. Root plate is a good term.