Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Gettin' curvy.....

Posts

Gettin' curvy.....

#1

Gettin' curvy.....

Thomas Skaggs, Foothills of Mount Level

Another piece for my upcoming gallery show. This piece is called "Split Decision". I guess you can figure that out. The illusion of a vertical plane being split to form legs for a cabinet. Also the illusion of a cabinet being embraced and suspended by two curvilinear forms.



The piece is 77" tall. The curvy wood parts are bent laminations of walnut. The cabinet is birdseye maple. The door panel is a resawn boomatch of crotch walnut.



The shelves are adjustable.

Tom

Re: Gettin' curvy.....

#2

Re: Gettin' curvy.....

Barry Irby

Fabulous. I like it. It really struck a note with me because it reminded me of some curvy guitar stand I made a couple of years ago.

A couple of questions. Could you post a picture of the back side? does the cabinet pass through the curvy frame. It looks like it does.

The rear "foot" appears to only intersect the front feet for a couple of inches. Is it nice and sturdy?

Did you vacuum bag the laminating process. I am really trying to wrap my head around that. I made my curvy lamination on forms with lots of clamps. I think there is a vacuum bag system in my future.

What do you see as the purpose of the cabinet? I was thinking jewelry cabinet, but that does not appears to be right.

This is wonderful, thanks for posting. I am suffering design envy. What would you charge to send me a design of most anything? I like most of your designs better than mine.

Re: Gettin' curvy.....

#3

Re: Gettin' curvy.....

Thomas Skaggs, Foothills of Mount Level

Thanks,

I was in a huge rush when I shot these photos and forgot to shoot straight side or back pictures. I'm gonna try to do that before the show.

The cabinet is gared for being a DVD/CD media cabinet but I decided to make the shelves adjustable for flexibility of use.

The laminations were made in a vacuum press. The edges were joined with biscuits. Connections with the cabinet provide additional strength.

T.

Re: Gettin' curvy.....

#4

Re: Gettin' curvy.....

Larry in NW Ohio

Another beautiful outstanding piece. Thanks for showing it. Larry

Re: Gettin' curvy.....

#5

Jason Roehl in Lafayette, IN

I'm beginning to think...

Jason Roehl in Lafayette, IN

...that you have a knack for this woodworking thing.

I like it. Simple, elegant, beautiful design and execution.

Jason

Re: Gettin' curvy.....

#6

Re: Gettin' curvy.....

Gary Smyth

I like this one much. With the pictures you're adding from other's requests I'd like to see one showing close up the transition between the light and dark on the sides and a brief description of how it was done. Also, over the past two weeks there have been at least three of your pieces presented at this site. I know that you are preparing for a show, but what was your schedule? Given my shop and the weather I couldn't do even the finishing on one in the time you have completed three completely different designs. Good on ya. What is the lead time on these. How much space have you available?

Re: Gettin' curvy.....

#7

Lead Time

Thomas Skaggs, Foothills of Mount Level

Oddly enough I used to proclaim myself as the world's slowest woodworker. Perhaps an exaggeration but as a hobbyist there was no real deadline. All that changed when I hung out my shingle. Time is money as they say so I have had to learn to be more efficient. Especially because I still have an 80% day job!

This piece took me about 2 weeks to make. While not numerous in parts there is a lot of preparation time. Most notably building the forms for the vacuum pressing.

Typically I attempt to have more than one project going at a time so that I can keep various things happening. When a project goes to glue or finish then they are idle. So I can be moving another project.

My basic shop work area is 500 square feet. Believe me....that is tight! Especially for furniture. I do have some spill-over space in the adjoining garage but I do 90% of my work in the primary shop.

For the upcoming show I will have at least 12 pieces of furniture...possibly 13 or 14. I need to be done by about April 8th to set up the show. I started work on this body of work just before Christmas so those pieces will have been made in about 3 1/2 months.

The challenge is not to build furniture quickly but to build furniture quickly to my standards. I refuse to cut corners or lower my standards. I would rather have fewer pieces for the show but of high quality rather than more pieces of lesser quality.

That said, I don't get much rest or general R&R time. Guess I'll have to catch up to that when I retire!

Tom

Re: Gettin' curvy.....

#8

A.J. Hamler

Re: Gettin' scurvy.....

A.J. Hamler

Tommy...

You need more citrus fruits -- lemons, limes, oranges, anything with more vitamin C.

A.J.

Re: Gettin' curvy.....

#9

Beautiful work Thomas

Howard In Toronto

Sorta proto-Krenovian.

Where his output was pared down and spare, yours is pared down and VOLUPTUOUS!!

Gotta love those curves.

Thanks Thomas.

Howard