Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Dawn redwood?

Posts

Dawn redwood?

#1

Dawn redwood?

John K Jordan

I asked about this on the Turning side.

Anyone have experience with dawn redwood?

I have some wood I think is dawn redwood. Someone gave me the tree which was over 24" wide at the butt log. I sawed a couple of hundred board ft into 1x12 boards and used it for interior shed walls.

The wood is an amazing soft pink color, very light in weight, slightly aromatic - the smell reminds me of eastern cedar. The color is unlike anything I've ever seen. It was very pale when freshly sawn but darkened quickly in the light to a richer pink.

The books say dawn redwood doesn't have much lumber value since it is soft and brittle. The color is so interesting and the wood is so light weight I thought it might be nice for boxes or something, especially something that might be carried around since it is so light. When I built the shed wall with it the guy helping me was so fascinated he wanted to take a piece home.

Any experience with this wood? I still have a couple of big cants, one 16" square and one about 12", and I have the butt of the tree just off the ground which looks like it may have a lot of figure. If anyone local wants a bit to play with give me a shout.

JKJ

Re: Dawn redwood?

#2

Re: Dawn redwood?

FredD

That is the third specie of Redwood , seldom mentioned when a article talks about California's two species.

It is native to China and I didn't know you could buy it, much less in lumber form.

FredD

Re: Dawn redwood?

#3

Re: Dawn redwood? *LINK*

Robin Corell in Atascadero CA

When they built a new library at San Jose State University a few years b ago they had to remove a large dawn redwood tree. As part of the public art for the building the tree was sent out to be milled into veneer for one of the interior columns. The building has a large foyer that is six stories tall and all the columns around its perimeter are square and faced with oak veneer. The column closest to where the tree originally stood is round and faced with the veneer made from the tree. It is one of my favorite pieces of public conceptual art. I have visited the library twice and on each occasion there were more students seated near the column with the redwood veneer an all levels than any of the other columns. I asked several students about it and most were not even aware that it was different from the other columns yet it seems to draw people to it.

You are correct that it has a different look to it that is difficult to describe with words. I would use the wood where its softness is not an issue and the brittleness is really no worse than any of the other soft conifers. What I mean by that is you are not likely to make something with dovetails with any type of redwood.

Robin

Ps. The link is a picture of the column is question, unfortunatly the library's web site has been redone and it lacks the visual emphasis that it once had.


http://www.sjlibrary.org/mlkart/imageExpand_popup.htm?id=43

Re: Dawn redwood?

#4

Re: Dawn redwood?

John K Jordan

There are a bunch of large dawn redwood trees in our area of TN. I planted a small one at the end of my big field about four years ago and it's probably 18' high now. These trees are deciduous and lose their leaves every winter. (It's growing fast but not nearly as fast as the leyland cypress I planted at the same time - they are pushing 30' now!)

Most of the dawn redwood trees I see around here are probably at least 80' high, maybe 100'. I really like the boards - easy to saw, light in weight, mostly clear of knots and cracks, and very stable. I had some 20" wide boards (from near the outside of the log from squaring the cants) in a loose pile out in the sun since last summer and saw no warping when I put them back on the Woodmizer last week to trim off the wane. Oak would have been cupped and curled.

I'm going to keep my eye out for people taking these trees down. The light weight is especially nice when muscling logs and cants on the mill.

Judging from the ends of the cants which sat out in the weather for six months, the wood is not nearly as resistant to weathering as the eastern red cedar I had in the same pile.

JKJ

Re: Dawn redwood?

#5

Re: Dawn redwood?

FredD

Well John , you got me wondering and I looked up the Tree and it seems to have become very popular in a hurry.

I found a site that sell 20" saplings for 4.95 a tree and ordered some.

I have just the place for them.

FredD

Re: Dawn redwood?

#6

A tidbit on Leylands

Barry Irby

I knew the man that selected the Leyland Cypress cultivar and started promoting them. They wanted a screening plant that would grow quickly. Years later he said that if he had realized how big they would get and the insects they are bothered by he would never have put them out for sale.

Re: Dawn redwood?

#7

Re: A tidbit on Leylands

John K Jordan

They do get huge - don't make the mistake of planting in the wrong spot. They make a great impenetrable screen if you plant them 5' apart.

I set out 5 about four years ago and a few more later. All have flourished except one planted near/under some big walnut trees is growing a lot slower which is not unexpected. Last year I planted 30 when I found 4' trees for a good price. (We have a big yard. :)

I have seen no evidence of insect problem in my trees or others in this area. Bagworms are reportedly one problem, as they are with other similar trees. I'll research this further.

JKJ