Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Prosecco Wine Cabinet

Posts

Prosecco Wine Cabinet

#1

Prosecco Wine Cabinet

Thomas Skaggs, Foothills of Mount Level

Here is a project I finished last week. It's a wine cabinet that I call "Prosecco"....named for the bubbles in the door panel. The case is curly cherry and the legs are black walnut.

The glass panel is leaded. The glass is water glass. The "bubbles" are turned of quilted big leaf maple, so they have an irridescent figure.



The cabinet holds two cases of wine and has cushioned racks for holding various stemware. The handle is cherry and ebony.



Tom

Re: Prosecco Wine Cabinet

#2

Alan Young

Terrific- more please  "hic"

Alan Young

Re: Prosecco Wine Cabinet

#3

Clint Searl

Most imaginative; great work; classy

Clint Searl

Re: Prosecco Wine Cabinet

#4

Re: Prosecco Wine Cabinet

John McGaw

Really beautiful. But it only holds two cases -- that is barely enough to get the party started. ;)

Re: Prosecco Wine Cabinet

#5

Ellis Walentine

Wonderful

Ellis Walentine

Tom, the wood bubbles combined with the leaded glass is a very original innovation. What a fun project. Good luck with it!

Ellis

Re: Prosecco Wine Cabinet

#6

Delightful!

Bill Houghton, Sebastopol, CA

There's been a discussion going on over on the quiet side about magazines, with several making the argument that Fine Woodworking no longer offers projects, designs, etc. to which folks can aspire. You, and other makers here (Chico among them but by no means alone), are filling that gap.

That's a very creative design.

Re: Prosecco Wine Cabinet

#7

Certainly nothing

Joanne in Point Pleasant, PA

to Whine about! What a fine cabinet to hold fine wine! I love the bubbles and glass. They are so different, and, well, so Tommy. Walnut and cherry are two of my favorite woods and together make one of my favorite combinations. The contrasting colors helps create a nice balance to the piece. Well done!

So, tick, tick--how soon till the show? How many more pieces to finish?

Re: Prosecco Wine Cabinet

#8

Barb Siddiqui

Re: Prosecco Wine Cabinet

Barb Siddiqui

What a great design concept you came up with. Wonderful, Tom. Your ideas continually amaze.

Re: Prosecco Wine Cabinet

#9

Re: Prosecco Wine Cabinet

Gary Smyth

Tom do I notice that the cabinet is tapered? Is that a decision related to the "upward" bubbles?

Just curious. Most of what you produce I would term as modern. Is your home filled with your designs or are they made for clients or other sale?

Re: Prosecco Wine Cabinet

#10

Re: Prosecco Wine Cabinet

Mike Rubes, Apex, NC

Hi Tom,

WOW! I love that piece! Maple/Walnut are one of my favorite wood combos. I like the proportions and everything about this one. The bubbles are a neat touch!

Thanks for the pics, you are always raising the bar.

Mike

I'll drink to that in Apex, NC!

Re: Prosecco Wine Cabinet

#11

Re: Prosecco Wine Cabinet

Jim Dillon

Thomas,

Love the creative design and the fact that it has a small footprint, yet can still hold two cases of wine plus stemware. Thanks for posting such a lovely piece and continuing to inspire me.

Jim

Re: Prosecco Wine Cabinet

#12

Re: Certainly nothing

Thomas Skaggs, Foothills of Mount Level

Thanks! 4 more weeks until the show and by my count about 3-4 more pieces to make....yikes!!! I'll be needing some wine after that!

T.

Re: Prosecco Wine Cabinet

#13

Optical Illusion

Thomas Skaggs, Foothills of Mount Level

The cabinet is not tapered but in the design I intended for an upward/vertical expesssion. The legs and glass design help create that illusion.

As for the furnishings in my home....oddly enough there are few examples of my work. Like the cobbler whose children have no shoes, I have no time to furnish my own home!

Tom

Re: Prosecco Wine Cabinet

#14

Beautiful Work as Usual Tom !

Don Orr

Re: Prosecco Wine Cabinet

#15

My Stuff and FWW

Thomas Skaggs, Foothills of Mount Level

Bill,

Thanks for the kind words. I can't speak for all the various woodworking magazines. I did some writing for Woodcraft some years ago when A.J. was the Editor (the good old days).

I thought it might be cool to try and do some work for FWW so I made a pitch there. I was rejected. The reason I was told was that my type of design would not test well with their readers group. I pondered that a while and since I still subscribe I thought about the content over the past few years.

My guess is that the subscription market is getting tough. Probably like most print media they are struggling for subscribers. It appears that their "readers group" represents the broadest possible audience. And what does the broadest audience want? Traditional design. So to push outside the boundaries of traditional is a risk and I suppose not in their business plan. I accept that and am not offended. They have to make a living.

I can certainly relate to your sentiments (and others). I have subscribed to FWW for a long time. For years it served as a source of inspration to me. They had some great writers in the past and featured designers of both traditional and innovative new design. I can still look back at older issues and find inspration.

Perhaps I have come into my own as a woodworker and designer but with woodworking magazines shifting focus in order to cast the widest nets I no longer find inspration. The arrival of FWW in my mailbox used to be a special thing. I regret to say that I now thumb through it while watching TV. Such is life.

But enough about magazines. The real fun of woodworking is making the dust and shavings!

Tom

Re: Prosecco Wine Cabinet

#16

Just curious Tommy - why backward bottles?

Tim Greif - West of Chicago

I don't believe I've ever seen a wine rack that had the bottle necks facing away from you. Was that a request, or just your own design decision? Stunning work, as always. Your eye for design simply amazes me.

Re: Prosecco Wine Cabinet

#17

I'm a backwards thinker....

Thomas Skaggs, Foothills of Mount Level

Thanks Tim,

Yes, I know many wine racks orientate the bottles the other way. I did it this way to make the labels visible and readable. Where I store wine in my home I have to keep grabbing bottle necks and pulling bottles out to see what they are.

Tom

Re: Prosecco Wine Cabinet

#18

Re: I'm a backwards thinker....

n

From my limited wine education, took a course here and there. the reason the bottles are tipped forwards is to keep the corks moist so they don't dry out.

As long as the corks are kept moist somehow, the orientation of the bottle should not be an issue.

Then again, if the bottles are rotated through the wine rack often, it wouldn't be much of an issue.

Norman

Re: Prosecco Wine Cabinet

#19

it wouldn't make much difference in Tommy's design

Bruce, a MN Galoot

because there's enough room to put the bottles in either way. However, most wine cabinets only have a 3.5" opening, and if there is a cradle to hold the neck at a different height than the base, there is not enough room to put the bottle in base end first.

Re: Prosecco Wine Cabinet

#20

Too bad Woodwork magazine was destroyed

Craig Daymon

That would have been a perfect magazine for you.

I think it's foolish FWW would be so short sighted. I agree the magazine has lost much of what made it worth waiting for.

Then again, I remember an issue of WWJ about a year back that had letters to the editor railing against an article featuring dovetails that would not be seen, I think covered by molding. Of course, this is traditional construction in the period piece presented, but the complainers whined excessively about how it would have been easier to use biscuits. I guess that explains why WWJ ran that issue with that piece, Convertible Coffee Table, in the October 2009 issue. They said, "Beat IKEA at their own game", but even IKEA would have been embarrassed by that project. Maybe it was just woodworking sarcasm for the comments?

-Craig

P.S. I sure do miss Woodwork magazine.

Re: Prosecco Wine Cabinet

#21

Re: My Stuff and FWW

awleonard

Makes me wonder if they really understand their readership as well as they think?!? They seem to find room for folks like Michael Fortune. What's traditonal about anything her makes? Which leads me to my perspective (not that it matters). I favor more traditional designs. But, woodworking is woodworking. While I might not favor contemporary designs, I still am very interested in how different woodworkers approach desgin issues, construction issues, etc. Actually, the contemporary stuff is more appealing in a way becasue "you people" tend to push traditional joinery and come up with new ways of doing things. One of FWW's biggest celebrities is Garret Hack. He certainly applies a modern approach to traditional design (and I really like his stuff). So, I don't really buy their reply to you. Every time I get my renewal, I consider dropping them. The price just seems so high for what I am getting. And to be fair, while I'm far from being an expert at any part of woodworking, the magazines are somewhat cyclical in their topic offerings, so each issue seems redundant. I am even getting bored with re-reading the old issues. Anyway, thanks for sharing your work with us. I'm building a couple of Martha Washington or Lolling chairs right now and I find myself wanting to not make them too traditional so that they better fit our decor ( a mix really, but mostly traditional - whatever that means!). Thought about doing something interesting with the stretchers - maybe some curves. Not sure I'll be that adventrous though. We'll see.

Tony

Re: Prosecco Wine Cabinet

#22

Re: Prosecco Wine Cabinet

charlie belden

The wood part of this piece is fairly simple and straight foreward. Seeing only three hinges for the door, with the weight of the glass plus the lead plus the wood bubbles, three hinges seemed iffy. But because they're SOSS invisible hinges, they've got more than enough holding power. Installing them - well that's another issue - especially three of them. Not much wiggle room with this type o hinge. But that's what this design required for maximum strength with minimal visual distraction from the wood. It's that attention to details that takes you work up several notches - technically. But it's your wood selection and unique takes on Old Standards that I admire even more. Making minor variations of very old ideas and doing them well takes skill. What you bring to the work, in addition to skill, is imagination - and the willingness to execute it - really well.

Where you find wood like this is a mystery. Working with stuff like this would intimidate the hell out of me.

Perhaps it may be like when I did jewelry. Once the price of the stones I was using had been forgotten they became just design element possibilities. But precious stones are readily available - for a price. Really interesting wood - well they don't grow on trees.

Another set of photos to put in my "Inspirations" folder - not to copy - but to look at and realize that anything is possible.

Once again - thanks.