We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
One of the galleries I show in approached me about coming up with a lamp design. I came up with a Greene and Greene design and made three of them in cherry, sapele and walnut. This is the sapele version with a simple lamp shade.
Thanks for sharing, Tom. I love a lot of G&G stuff. I have made 2 lamps in a similar style. Some of them can look heavy and clunky. This is lovely and elegant. And the Sapele is wonderful! I think I have a slab of that in my shop. I've been saving it for something special. Now I know why.
But I would like to see a bit more height and spread down at the foot. I would have tried to go with 12/4, then rather than plumb cuts on the end, I would like to see some fairly acute inward slant< 45� on the ends of the foot.
Another winner! Beautiful job on the quartersawn post. Did you split the post, rout a groove for the cord, then glue the pieces back together? I love floor lamps but it is so hard to find decent ones at a reasonable price. We usually find them in antique stores and have several. Your post has inspired me to try one.
The lamp shade was purchased by the gallery, it is some sort of parchment. They had some other nice ones that were mica with various leaves sandwiched between layers. Most the lamp shades they have are made by Sue Johnson in Albany CA
The finish is wiped on oil/poly blend. The lamps needed to hit a certain price point so joinery is pretty simple the post is has two domino floating tenons and a couple of screws holding it the base. The rest of the lamp is held together with screws hidden by ebony plugs were they would be seen.
post are a core of poplar that I cut a groove in and then glued together. I then tapered them on the jointer and then veneered them. Seems a lot easier than the mitered technique.