Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Ball bearing balls

Posts

Ball bearing balls

#1

Ball bearing balls

Larry in NW Ohio

>Sounds strange doesn`it.I bought a driver bar with the spring plunger in it, in other words it has springs pushing little balls pushing side ways to keep the bar tight in the miter slot. I have a couple more bars I would like to put them in but I just cannnot find the ball bearing balls. Would any one know where I could get just a few, 10-12 steel balls. I tried bearing stores, but they don`t have them. I also tried Peachtree where I got the driver, but they were NO help at all. The balls are 3/16" and would need springs top go with it if they could come from the same place. I just love to tinker. I did try to take a couple of bearings apart. Thanks to All. Larry

Re: Ball bearing balls

#2

Re: Ball bearing balls

Bill Earl

>A bike shop will have 3/16" balls. No idea about the springs.

Re: Ball bearing balls

#3

Rick L

Re: Ball bearing balls

Rick L

>Ball plungers www.mcmaster.com is what you want

Re: Ball bearing balls

#4

William Falberg

Re: Ball bearing balls

William Falberg

>MSC Supply or Grainger.

Re: Ball bearing balls

#5

Re: Ball bearing balls

Tony - Memphis

>Might also look under gauge balls. We used to buy them in small quantities to use for measuring parts (QC stuff). I think we bought them from MSC, Small Parts Inc., etc. Don't forget eBay!

Tony

Re: Ball bearing balls

#6

My thought as well

Lee Schierer McKean, PA

>Ball plungers come with springs and balls in an enclosed housing that is threaded on the outside for ease of adjustment. You can also get pin type plungers made the same way with a retractable pin.

Re: Ball bearing balls

#7

Re: Ball bearing balls

Dick Coers

>How about an Accuride drawer slide? Kinda expensive way to get them, but you might just have an odd length one on the shelf somewhere.

Re: Ball bearing balls

#8

Mc Master Carr P/N     9528K13

Virgil Johnson

>3.17 for a hunnerd of em.

Re: Ball bearing balls

#9

Re: Ball bearing balls

Larry in NW Ohio

>I couldn`t believe it. I went uptown to a bike shopbut he was closed. So I went to the local hardware store and they had steel balls and the right size. Thanks to all that helped. This is without a doubt the best site on the net. THANKS ELLIS AND YOUR AIDS. Larry

Re: Ball bearing balls

#10

Re: Ball bearing balls

del schisler

>at least you have some new ball's