Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Tool chest.

Posts

Tool chest.

#1

Tool chest.

Virgil Johnson

>Its looking more like a real tool chest this week. I decapitated it last week and mounted the lid. I used brass hardware from H. Gerstner & Son to decorate it. I have not decided on what types of knobs to use. The drawers are still a bit tight side to side.



Re: Tool chest.

#2

Re: Tool chest.

Jim Pugh

>Great looking tool box. Do you have a nice old Machinery's Handbook to put in that middle drawer? How about small round brass knobs for the drawers?

Re: Tool chest.

#3

Re: Tool chest.

Doug Ridley

>Looking real good, Virgil. Gonna be a nice one. Makes me proud to say I know you.

Re: Tool chest.

#4

Barb Siddiqui

Re: Tool chest.

Barb Siddiqui

>That is very fine!

Re: Tool chest.

#5

Sweet!

doug f, san clemente, ca

>That's a fantastic looking chest, Virgil. Congratulations on an outstanding job.

I'd love to see some pictures of the drawers open just to see the design and construction.

Doug

Re: Tool chest.

#6

Re: Tool chest.

Phil Joines

>Really nice box. How much clearance do you have for pulls?

Re: Tool chest.

#7

Re: Tool chest.

Hikmet C. Sakman

>Looks very authentic Virgil. It will look more so after a couple of years. Don't forget to give it a sun-bath this summer and I would only put linseed oil on it until it gets some sun-tan.

So, when are we going to see some color on this box? Drawer front flowing grain is a very nice touch.

Chico...

Re: Tool chest.

#8

Re: Tool chest.

Jim Dillon

>Virgil,

I also like it. Be sure to show us a picture when the knobs and finish are on. Are you planning to line the drawers with something?

Jim

Re: Tool chest.

#10

That's really nice!

Bruce, a MN Galoot

>I made one for my BIL a few years ago. It is astounding how much fiddly, detailed work goes into one of those babies. You've done a really good job on yours.

Re: Tool chest.

#11

Deftoil and later I'll ad some shop grime.

Virgil Johnson

Re: Tool chest.

#12

Re: Tool chest.

Virgil Johnson

>I plan on using felt in the drawer bottoms. I used 26ga galvanized steel like the original so I'll have to cover it with something.

Re: Tool chest.

#13

Re: Tool chest.

Virgil Johnson

>I think I have around 7/16" for pulls. 5/8 originally but I had a slight mistake which ate up some room.

Re: Tool chest.

#14

Great (and realistic) line!

Bill Houghton