Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Working Metal in a Woodshop

Posts

Working Metal in a Woodshop

#1

Working Metal in a Woodshop

Tom MacGregor

>My first love is working wood, but I admit it - I'm a total tooljunkie. Being able to work a little metal means more options for making jigs & fixtures and restoring vintage iron. This is a photo of a 1/4hp Dayton C-face TEFC motor attached to a Boston Gear 20:1 speed reducer driving a newly restored Delta Homecraft 10" Bandsaw. Motor & reducer snagged on our favorite auction site for $30! Outfitted with a 1/4" 14TPI bi-metal blade running about 80FPM it works very well on aluminum as seen in my next post. I also have a 3/8" 10TPI blade I'm going to try on mild steel.


img

Re: Working Metal in a Woodshop

#2

William Falberg

Re: Working Metal in a Woodshop

William Falberg

>You really suck, Tom. And furthermore, I don't believe it: there's no picture.

Re: Working Metal in a Woodshop

#3

Re: Working Metal in a Woodshop

Tom MacGregor

>I'll try again, the pic showed in the preview.


img

Re: Working Metal in a Woodshop

#4

Nice

Dan Donaldson

>Looks like a great idea. Sometimes pictures will get lost if you preview. If you do, rather than post from the preview, use the back button to get back to the original post and then post from there.

Re: Working Metal in a Woodshop

#5

William Falberg

Re: Working Metal in a Woodshop

William Falberg

>That's really sweet! And you stole it. Was that on Craigs List?

Re: Working Metal in a Woodshop

#6

Re: Working Metal in a Woodshop

Larry in NW Ohio

>WOW Tom that a great idea. I love metal working as much as woodworking, but can only afford doing one.Larry

Re: Working Metal in a Woodshop

#7

William Falberg

Re: Working Metal in a Woodshop

William Falberg

>Larry, I bet you'd be surprised how little difference there is between working wood and working aluminum with the tools you already have. There's probably $100 worth of little goodies separating you from metal-heaven right now. There's bound to be a welder in your area and I bet he's got a pile of scrap he'd like to be rid of. He's probably also a first-class guy with more in common with us than you'd think. Go out there and give him a big hug!

Re: Working Metal in a Woodshop

#8

Re: Working Metal in a Woodshop

Larry in NW Ohio

>Well William I did quite a bit of metal working when I shamed myself in times of old and I had to work for a living, but of Fridays I had to put my hand behind my back to get my check. I was on maintanence for about 15 years or so untill the doctors told me I had to quit. After 7 or 8 or them telling me that It fianally sunk in. I just loved it, I really looked forward to going in to work almost every day. The only thing I disliked was our so called boss, he was one of those 90 day wonders. He new it all and he would tell you so. I found that out one time we were pouring concrete and we ran out of re-rod and told us to get son conduit and use that. We just looked at each other as we went and got son conduit. Yes aluminum is nice to work with, I just made an automatic can crusher a few weeks ago, and believe it or not it works. Larry