Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Columbus Woodworking Show purchases - Long------We

Posts

Columbus Woodworking Show purchases - Long------We

#1

Columbus Woodworking Show purchases - Long------We

Joe Pack

>I had planned to drive to Columbus on Friday morning (a bit less than 2 hours away) to check out the Woodworking Show and the extravaganza at WoodWerks. I mentioned to my sweetheart that I might stay overnight Friday night in order to have enough time to casually check out the toys, watch the demos and talk to some of the 'experts' at both places. Plus, I had a certificate for a free night at Red Roof Inn, so the stay would cost me nothing. My ticket was good for 3 days, and I had free spouse tickets for my wife, so that was cheap, too.

My sweetheart then reminded me that she had Friday and Monday off, suggesting that she might like to go along...she would walk around a while, then find a seat and be content reading her book while I enjoyed the shows. Oh...she also mentioned maybe getting over to the JC Penney outlet store which was only a mile or so from the Red Roof Inn I was planning to stay at. No problem, says I...I would love to have you along. We'll go to Spaghetti Warehouse for dinner Friday night and make a good couple of days of it.

We left after she got off work Thursday evening so we could make 2 full days of it on Friday and Saturday. (Oops...only one free night, but the second was cheap at RR Inn, and I'm not the cheapskate my kids think I am.) Dinner out, then to bed early.

My sweetie said she would like to go to the Penney's outlet store first on Friday since the Woodworking Show didn't open until noon... she would only be a few minutes. No problem says I. A "few minutes" later, we left the Penney's store at 1:00 p.m. and grabbed lunch, getting to the Woodworking show about 2:30. No crowd, plenty of time to walk around and enjoy myself, pretty much making a "once around" to see what was there and to listen to Jim Heavey ( a VERY good speaker) for a while. Bought a couple of core box bits and a hold-down clamp I had gone for, plus a chatter tool and turning DVD that I hadn't planned on buying. The show closed at 6:00 p.m., but we left at 5:30 p.m. to beat the Friday night crowd to Spaghetti Warehouse. I had a lot left to see, but had all day Saturday, so figured no problem...lots of time tomorrow.

Sitting at breakfast, my sweetie said, "If we have time, I'd like to run back across the overpass to the Penney's store to look at one thing I forgot yesterday...it'll just take a couple of minutes. No problem, says I. A few minutes won't hurt.

2 1/2 hours later, we left Penney's. A quick drive-thru lunch from McDonald's and we parked at the Woodworking Show at 2:00. Again, no problem...even found a parking place in the front row because folks were leaving by then. Enjoyed a hand tool presentation, another of Jim Heavey's very practical talks and a hand applied finish promo (actually a very informative session even though the purpose was to sell a product) for a finish called Bush Oil. Visited and watched product demos at several booths I had singled out the day before, and got a lot of good information from the folks there after their "advertisements" were over. Bought a couple of little things, plus a can of Bush Oil. After watching the demo and being able to touch/feel the finish, I was impressed enough to bite. Comparing it to Watco for finish, no comparison. This Bush Oil product may be the magic finish I have been looking for...or may just be another can of stuff that seemed like a good idea at the time.

My legs hurt from all the standing on concrete (most of it at JC Penney's), but we managed to hang out until closing time at 6:00 p.m. Actually, the last hour was the best hour...no crowd, and lots of time to talk with a lot of nice people, particularly the folks at the Lee Valley, Woodline USA and PS Wood booths. Lots of information, whether you were buying or not.

Anyhow, the "buy" list came to 1 set core box bits, chatter tool, turning DVD, scroll pattern, can of Bush Oil finish and a hold-down clamp. Plus.....5 solid color blouses, one purple patterned dressy blouse, two white "goes with anything" blouses, a black blazer type jacket, a green/white/ brown patterned jacket, a black&white patterned dress, a navy blue dress, two pairs of khaki slacks, a gray vested pants suit, a black business suit, 8 pillow cases, 10 wash clothes, two knee length cotton nightowns, two long cotton nightgowns and assorted dainties.

Boy, I love going to woodworking shows. Can't wait 'til next year. Maybe Penny's will have something in my size.

Re: Columbus Woodworking Show purchases - Long------We

#2

Seems like a fair tradeoff to me!

doug f, san clemente, ca

>

Re: Columbus Woodworking Show purchases - Long------We

#3

Thanks Joe

David Yoho

>Joe, thanks for the best morning chuckle I've had in quite awhile. I especially loved the way you composed your story and how you told it. The irony of the initial plan to save money while staying overnight to see more show and the end result is priceless. With that said, it sounds like you both enjoyed the weekend spent together as well as the shopping. Great story!

David

Re: Columbus Woodworking Show purchases - Long------We

#4

Re: Columbus Woodworking Show purchases - Long----

Larry in NW Ohio

>Joe If you keep taking my wife on such trips, you will make me a very happy man. As I read your post, I could not believe how so much alike the two are. It`ll just take a menute or two, yea, Ah, ha suuureee. Larry

Re: Columbus Woodworking Show purchases - Long------We

#5

Re: Columbus Woodworking Show purchases - Long----

Larry in NW Ohio

>I forgot to mention that my BIL and I are going to the show today--without the wives{{:_))))))) Larry

Re: Columbus Woodworking Show purchases - Long------We

#6

Jim DeLaney, Austintown, Ohio

Re: Columbus Woodworking Show purchases - Long----

Jim DeLaney, Austintown, Ohio

>Joe,

I was there on Friday afternoon, too. Sorry I missed you...

My trip was a bit similar - but not so drastic as yours. It's about 175 miles for me - from Austintown. We left home at about 9:00. Stopped at a quilt shop North of town (an hour); side-tracked to Woodcraft because it was just a mile or so away (30 minutes); South from there to Schmidt's for lunch (1� hours) then finally got to the show about 2:00. Spent a couple hours there. Bought some small items - mainly shop supplies, and some DC accessories.

Then, over to WoodWerks for an hour - bought some finishing supplies - then to the hotel, near Easton. At Easton, we went to the Container Store, walked the mall, then to dinner at Hama Japanese; then over to Trader Joes; then back to hotel.

Saturday morning - back to mall for breakfast at Panera, then thru mall again, to Sur le Table and a couple others, then start home - via another quilt shop (another hour). Got home late yesterday afternoon.

Not quite so intense as yours, but similar.

Jim D.

Re: Columbus Woodworking Show purchases - Long------We

#7

Re: Thanks Joe

Joe Pack

>Glad I could entertain you, David!

And I really did have a good time with my sweetheart. She needed the time away more than I did.