We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My job often requires me to make reusable insulated shipping crates. Exterior skin is CDX, 2x frame stuffed with 1-1/2" pinkboard, interior is AC and Luan. It seems I can no longer count on sheet goods of accurate size or quality. Under & over size sheets can easily account for 1/4" difference in width, luan has voids and delaminations, AC has highly visible patches, and I've encountered factory edges up to 3/8" out of square. Are my suppliers choosing cheaper grade stock or is overall quality going down the tubes?
>About 30 years ago, maybe a little more, I built an entertainment center out of run-of-the-mill oak plywood. Didn't think anything of it. We don't use it anymore, so last year I tore into the box to use the plywood for something else. This plain jane plywood was dead flat and had 11 plies. I'm not sure I could get custom-made, cabinet grade plywood that good anymore.
>Tom, it's probably C: all of the above. A cheaper grade and yes, ply is being imported with less quality. I use to work for a friend thats a Painter. In the new homes that had hollow core interior doors such as Bifold closet doors, the veneer is so thin that the glue that was used to construct the plywood would bleed through the top layer of veneer. Try geting an even stain on that. Those doors came from Malaysia.
>being a cabinet maker, I buy plywood every few days. I find you get what you pay for. Cheap ply is just that. Some of the china stuff is pretty good, some is real junk. Canadian, American, and European cost a bit more, but is is also better quality. Mill grade #2, and shop grade #2 and #3 are thick and thin, with voids and out of square.
>I blame some of the poor quality characteristics of plywood on the lowering or elimination of formaldehyde. If I use cheap stuff, I can get the face veneer lifting and running ahead of the upcut spiral bit on the CNC. All of it sure does move around a lot. I don't even have a theory for that unless they don't control drying of the veneer.
Ed Freestone------WebKitFormBoundaryiliP7S+oBWEY3G
Ed Freestone------WebKitFormBoundaryiliP7S+oBWEY3G
Guest
Re: Quality of Plywood Decreasing?
Ed Freestone------WebKitFormBoundaryiliP7S+oBWEY3G
>I bought something called Sandeply (spelling?) from the orange borg to make brackets and legs for an outfeed table. It's much lighter than "regular" plywood and very soft. I found I had to be very gentle when installing screws so it wouldn't split or crush. It's crap.
>I've taken to getting what is euphemistically called baltic birch at Menards for nearly everything I do, except for nice cabinetry (which I get from Youngblood lumber in Minneapolis) It's not really baltic birch, having been produced in China, but I do so love to argue with the 20-year-old staff about the impossibility of baltic birch being made in a country 50,000 miles from the Baltic sea. At least it's better than that sandply crap. Not much.
There is one sales person there who is very good... She was a construction manager for her dad's construction business and knows her tools very well. I now seek her out for advice. I'm surprised she doesn't run the store, she's so good.
>While quality seems to have gone down, the weight of a sheet of any size seems to have gotten a lot heavier over the years. Forty years ago, I could carry a sheet of 3/4" with no trouble at all. Twenty years ago, I could carry a full sheet of 1/2", no sweat. Now I can barely manage a sheet of 1/4" by myself.
How can a product go down in quality, but go up so much in weight? Quality control ain't what it used to be.