Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Maple Bloodwood Desk a la Modern (w/PIX)

Posts

Maple Bloodwood Desk a la Modern (w/PIX)

#1

Maple Bloodwood Desk a la Modern (w/PIX)

Hikmet C. Sakman

>Hi Everybody,

This past has been my worst year in many different ways and financial (recession) part is just a minute part of it. Long story short, I've been busy making furniture, just slowed myself right down, almost crawling speed but 2010 will have a much faster pace as it seems.

Anyway.... This is the latest one, custom made for a computer programmer who works on the games in the Apple Iphones. He must be the most particular, detail oriented client I've ever met. I designed the desk but the shape came from the client. His initial design was in autocad, of course and he commented that he was amazed how close it turned out to my drawing. Light wood is Eastern hard maple.

Maple Bloodwood Desk

All the drawers are on Blumotion full extension slides. Handles are all my design. (From now on, I think I'll refuse to use metal hardware, unless design 100% dictates a specific type of metal hardware.)

In this piece, the handles were inspired by VW Bug. I previously used this design in my first wine cabinet in ebony over koa. It looks equally good with this combo, though it certainly looks bold.

Maple Bloodwood Desk

Behind the doors, there is a pull out tray and an adjustable shelf.

Maple Bloodwood Desk

Here is the close up shot of the handles. Insides of the shorter ones are different shape to allow finger room. All edges are radiused 1/8" and drilled/dowelled for screws as this bloodwood is way too brittle for screws in 7/16" wide pieces.wooden handles

Inside of the handles are cut in a shaper with a horizontal cove cutter (It's CMT's small cove cutter for raised panels but I removed the bearing and its mounting hole.)wooden handles then cut off and then shaped on a templete.wooden handles

Maple Bloodwood Desk

Lastly, the inlays. I steam iron them on a form to bend it with no success. So I ripped thin strips to make 1/8" width, then I steam ironed them. 3 layers and it's impossible to tell that there are three layers at these curved parts of the inlays. Scarf joints in the inlays turned out equally invisible.

Maple Bloodwood Desk

Maple Bloodwood Desk

This is the warm up before the big desk. Hope you enjoyed it.

Hikmet C. Sakman

"Chico"

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#2

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Don Orr

>Stellar work as always. I like the clean lines and uncluttered details. Great drawer pulls !

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#3

Clint Searl

Beautiful work

Clint Searl

>

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#4

Hey Chico

Thomas Skaggs, Foothills of Mount Level

>Very nice desk my friend. It's always a relief to please a client, especially a picky one. Well done! Give me a call some time eh?

Tom

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#5

Re: Hey Chico

Larry in NW Ohio

>Thomas Beautiful job as usual. I have 1 question, one of many but I`ll keep it to one, how do you make the indentation behind the drawer handles? Larry

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#6

I have the same question.

Terry Alexander

>

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#7

Uh....Larry.....

Thomas Skaggs, Foothills of Mount Level

>You misspoke....I think you mean to ask Chico?

Tom

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#8

I am not Thomas, but I'll tell you Larry... ;-)

Hikmet C. Sakman

>Plunge router, top bearing CMT's "bowl" bit and an oval templete with fence. Actually I had to use two different templetes for two different sizes, obviously.

Thanks Larry,

Chico...

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#9

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Harvey Brooks, Victoria, BC

>I saw it in the shop last week and it looks even better in reality.

Great attention to detail as always.

Looking forward to your presentation tonight.

Harvey

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#10

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Thomas S Stockton------WebKitFormBoundaryAt+6o7QFm

>Very nice Chico, the monitor mount is very cool where did it come from? I agree about making your own handles, it is so much nicer and really can make or break a piece. I have two favorite parts of the desk, the legs are really sweet almost an understatement if the handles were inspired by a VW bug the feet are more 1950's Detroit. I also really like the handles. My only criticism is that the way the backsplash is attached and is visible under the top is not as clean as the rest of the piece. But that is a pretty minor point very nice piece.

Tom

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#11

Re: I am not Thomas, but I'll tell you Larry... ;-

Larry in NW Ohio

>Sorry Tom-Chico-or whoever you guys are. I just posted from the post I was reading at the time. Having a few to many brain farts today. I`m just having a bad day today. I hope and pray for forgiveness. {:-))Larry

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#12

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Nick Tuzzolino

>Thank's for showing another fine piece. Very impressive.

I hope 2010 is a better year for you. Best wishes to all.

Nick

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#13

How to tell us apart.....

Thomas Skaggs, Foothills of Mount Level

>Chico is the good looking one with the mysterious accent.

T.

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#14

Pics of the wine cabinet

Gil

>Beautiful desk!!! Could you post a picture or two of your wine cabinets?

Thanks,

Gil

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#15

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Fred Davis

>I really like your treatment of the drawer fronts Chico, the rounded end of each is a nice departure from square ends.

I tend to agree with your dislike of metal pulls and every time I do wooden ones , I make two or three extra and include them , just in case.

FredD

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#16

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Hikmet C. Sakman

>Hi Tom,

It came from his old "Techno" computer stand. (I can't really call it a desk.)

You've got a point about the backsplash sticking out from underneath of the top's corners.

Thanks.

Chico

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#17

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Jim Dillon

>Chico,

Beautiful work as always; you never let us down in that department! And thanks for taking the time to explain and document how you made the handles and laminate trim. I actually was wondering about how you attached the handles in such thin wood. I may "steal" your idea for using the dowels for my next handmade handles, although I have used the smallest Domino loose tenon (3/16 x 3/4) cut to a custom length to fasten my most recent wooden handles. That worked very well, plus no screws showing on the inside. However, the downside is that alignment is nerve-rackingly critical with no allowance for handle adjustment afterwards. Thanks for posting.

Jim

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#18

Thanks...I enjoyed the presentation

Bill Tindall

>

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#19

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Chen Lee

>Hi Chico,

Again you have a wonderful use of design and material, the soft edges beg to be touched.

Chen

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#20

How about leg space?

Alexandre Grigoriev

>

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#21

Re: Maple Bloodwood Desk a la Modern (w/PIX)

gary peterson

>sweet

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#22

Re: How about leg space?

Hikmet C. Sakman

>Just like drop front desks of yesterday, this desk's central pull-out tray for keyboard creates the legroom when it's pulled out.

Chico...

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#23

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Hikmet C. Sakman

>Thanks Jim,

I used to glue them as well, but for the reasons you stated, screwing makes it easier than glueing, though still very time consuming and labor intensive in comparison to metal hardware.

Additionally, I think wooden handles are these sort of design are vulnerable and it'd be easy to replace in case something happens. I always make spares.

Chico...

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#24

Re: Pics of the wine cabinet *LINK*

Hikmet C. Sakman

>Thank you. You can see my wine cabinets at http://www.sakmanfinewoodworks.com/Gallery-Cabinets.htm


Wine Cabinets & Others

Re: Maple Bloodwood Desk a la Modern (w/PIX)

#25

Re: Maple Bloodwood Desk a la Modern (w/PIX)

Hikmet C. Sakman

>Thank You Nick. Happy New Year to you too.

Chico...