Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>11 Jan 2010

Good Morning,

It's been really cold here (well, to us it's been really cold) and with temps near the single digits, that pretty cold here. Some of the mornings reminded me of some of the times I had when I was stationed in Italy many years ago.

Been planning out things to do in the shop and I had a lady bring me a chair of hers that she desperately need to have repaired. I guess this year, I will be teaching myself how to make chairs as well as how to repair them. I still have people that want some of my cutting boards so I'll be working on more of those at the temps begin to warm just a tad.

Been staying busy keeping the woodstove going, keeping the wood pile moving from behind my shop to the back porch of the house. It's been a good time overall and I've really enjoyed friends coming over and all huddling around the stove for hot chocolate or coffee.

The LOML and I are making plans on continuing forward with doing upholstery here in the other end of my shop. We've already started working on getting the old "playroom" all setup for upholstery work. We are excited about it and are trying to learn what we can as time permits.

Well, that's it for me on this 21� morning (cold enough to keep me off my motorcycle)....so what did YOU do this past weekend??

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Holy cow Dennis

Terry Quiram

>I hope to shout that 21 is too cold to be on the motorcycle. Even if the temps rise enough to ride here I will wait until it rains to wash all the salt off the roads. BYW I traded up last fall. I am now riding a Kawasaki 1600 Classic.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Simon St.Laurent - Dryden, NY

>I made a template for routing maple ends for preformed laminate tops, but had to stop because I didn't have a small enough bit. I'll pick up again next weekend.

I also marveled at how cold my basement could be. It wasn't just the limits of my small electric heater, but cold coming up through the floor. Think I need to get some of those flooring pads for the places I stand the most.

Re: WC Weekend Accomplishments....

#4

Got started on some water skis

Grant in Iowa

>I had promised the local show ski team that I would make them some water skis to replace the beaten up ones they are using now. I made one prototype ski last summer to ensure my methods and materials would hold up, I committed to making several "Around the Boat" skis this winter.

In show skiing, "around the boat" is where a string of skiiers on slalom skis ski around the front of the towboat and keep on going while the towboat makes a quick sequence of turns to keep the rope tight. The team I am making the skis for routinely puts 6 skiiers around the boat at one time. They do this for the enjoyment of an audience or in competitions.

So anyway, my wife and I selected some ash 8" wide and 6' long and resawed it to about .270" thickness in preparation for the laminate bending process. We made enough material for 4 skis, but when we got done flattening the plies in the drum sander, I discovered that due to a bit of blade wander druing the cutting process, many of the plies are a bit too thin. So I will make another five plies later to combine with the plies we made to both thicken the individual skis, and to make an additional ski.

I am also hatching a plan to slightly taper each end of the new thicker plies to improve strength while keeping weight down. I am thinking of making some thin edges to place beneath each end of the ply as it runs through the drum sander.

As I have briefly explained before, the skis are glued up with Dap Weldwood plastic resin and bent over a positive form in a vacuum press. These will have a layer of formica top and bottom to improve wear resistance in use. This type of ski has been made for show skiing for decades, and holds up well.

All in all it is a fun project, but I have had to ratchet up several skillsets to accomodate the needs of the project.

Regards,

Grant in Iowa

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Joseph Mulherin, Sr.

>No woodworking. This is Monday and I am doing my weedeating and mowing my lawn.... temp is going up to 78 today.....

Re: WC Weekend Accomplishments....

#6

I Shivverd in the Shop...

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dennis,

Our celler is colder than I can comfortably manage, even with the lights turned on and a warm sweater. So I am staying out of the deep freeze. I managed to complete the chess board I began making last week. The 1 5/8th" squares are maple and walnut, and that board field is bordered by a 1/4" band of honduras mahogany. I have a 1 1/2" field of quilted maply surrounding that. The 3/4" birch ply base is edged with chamfered 1/2" mahogany-dyed QS sycamore. The mitering kept me too busy to notice the temperature. The chess board will go to my #2 daughter's family. I've received orders from #5 and #7 son for duplicates.

George

Re: WC Weekend Accomplishments....

#7

Re: I Shivverd in the Shop...

Tom Rex in TX

>Hey George, could you post pictures of your checkerboard.

I'm in the process of doing the same thing and even using the same species of wood. My squares are 1 7/8". I'm going to glue them to a piece of 3/4" MDF. Table will end up about 27" square.

I'd be interested in seeing yours,

T Rex

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Robert R. Clough - Thorncraft

>I've not been in the shop for over a week now. I've been busy writing an article - now done. Perhaps I can now go back (if it warms up).

Re: WC Weekend Accomplishments....

#9

Sure I Can, Tom

George@Colonel's Workshop-Havertown PA

>Good Afternoon Tom,

I'll take a pix tonite and try to download onto my computer. Usally I'm pretty dumb about that, but my #3 daughter is coming to dinner, and she is pretty smart--usally. I've only applied two wipe-coats of minwax tung oli, so it only has a very slight sheen. Good timing.

George

Re: WC Weekend Accomplishments....

#10

Re: WC Weekend Accomplishments....

Larry in NW Ohio

>Joe I don`t know where you live, but I HATE you. Especially when you rub it in. I`m going to mow the lawn, next youare going to tell us you`re going to lay in the sun and have a cool one. Really I envy you. Larry

Re: WC Weekend Accomplishments....

#11

Darrell in Oakville

Re: WC Weekend Accomplishments....

Darrell in Oakville

>I'm a bit late posting, but I was busy helping the Cub Pack with their Pinewood Derby cars. Brought in my small workbench with 4 portable vises on it and a pile of coping saws, rasps, files, and sanding blocks. The kids made a wonderful mess.

On the weekend I finally finished off that media cabinet I've been hacking away at for the last year or so. It's made of white pine, finished with shellac. 28" wide, 6 foot high, 8 inches deep. Would you believe the hardest part was mounting the hinges?

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User


img

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments....

mdclor

>Wow! Wonderful scrolls!