Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Grinding/shaping beading and scratch stocks?

Posts

Grinding/shaping beading and scratch stocks?

#1

JL

Grinding/shaping beading and scratch stocks?

JL

>The LOML got me the LV beading tool for Christmas. It came with the single point 3/32" cutter and several blank cutters.

I was planning on "drawing" my desired profiles with a Sharpie and then using my 8" grinder to rough shape and my Dremel tool and files to "refine" the shape. Any other suggestions? Tips?

TIA

Re: Grinding/shaping beading and scratch stocks?

#2

suggestions

Bill Tindall

>I am struggling with a new computer and new to me Win 7. I begrudge the time spent diddling with computers to make ethem work right!. What I am typine is so small I can barely see it. Will need to learn how to increase font, someday.........

I don't have time to find it for you just now but over on the hand tool forum, about last week or certainly within the last 2 weeks, there was a detailed discussion of how to make scratch profile scrapers. It was in ressponse to a question I asked so it is within a discussion and no tthe original title. The key is to hone the edge and both faces of the stock. I use a variety of files to make the profiles and you will need guide lines much finer than a sharpie makes to define the profile to be filed. The blue paint machinists use and a stylus are what I use to draw the profiles on the scratch stock.

When done right they produce shavings like a hand plane and when they aren't the make digs and produce crumbs.

Re: Grinding/shaping beading and scratch stocks?

#3

Here *LINK*

Bill Houghton, Sebastopol, CA

>I'm a year into a new computer, and have given up the struggle to understand it.

I was found the post Bill T. mentions - linked below (at least, I think this is the one Bill was thinking of). In fact, that whole thread is worth reading if you're learning about scratch stocks.

We need to woo you over to the quiet side, Jerome. Lots to learn there.


This is in the middle of the thread

Re: Grinding/shaping beading and scratch stocks?

#4

JL

Thanks - but I like my electrons...

JL

>But in many ways, a lot of what I do is on the quiet side. I make all of my spindles with draw knives and spokeshaves and I do a lot of hand planing and card scraping. I just prefer a powered lathe, a cabinet saw, a jointer and a planer.

Re: Grinding/shaping beading and scratch stocks?

#5

Not mutually exclusive

Bill Houghton, Sebastopol, CA

>The reality is, most of the folks on the hand tool side use power tools, too - there's just more emphasis on the hand tools.

Re: Grinding/shaping beading and scratch stocks?

#6

Re: Grinding/shaping beading and scratch stocks?

Fred Davis

>I got a DVD from Secret Santa that was made by Larry Williams and it is the best I have seen on the subject of grinding , shaping and maintaining a edge on profile cutters that are used in wood planes.

He is old school and uses oilstones for lapping and honing and tells why this works best for him.

It is available from Lie-Nielsen ToolWorks

I recommend it highly to those who want a better edge in a shorter time, without a big investment in grinding and honing equipment.

FredD

Re: Grinding/shaping beading and scratch stocks?

#7

Try

Dan Donaldson

>For the font size, try holding the control key and moving the scroll wheel. Should adjust the size for you.

Re: Grinding/shaping beading and scratch stocks?

#8

so do I, but.........

Bill Tindall

>that does not preclude me from benefiting from the wealth of expertise on useful stuff available on the Hand Tool Forum. Making profile scrapers is a prime example.

Re: Grinding/shaping beading and scratch stocks?

#9

Re: Grinding/shaping beading and scratch stocks? *LINK*

Bob Entwisle in NJ

>I've used a combination of big grinder to dremel size grinding and/or files and slipstones. I think pretty much anything that gets the job done to create the profile you're after.

Derek Cohen posted this on the hand Tool board within the past few weeks.


http://www.woodcentral.com/cgi-bin/handtools.pl?read=143241#143241

Re: Grinding/shaping beading and scratch stocks?

#10

Re: suggestions

Larry in NW Ohio

>Bill As Dan said hold the ctrl key down and roll your mouse whell or you can click on View on your bar at the top and go to Text size and you`ll have a few to pick from. Good Luck. Larry