Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Table saws

Posts

Table saws

#1

Table saws

Larry in NW Ohio

>My son just informed me he would like a small table saw. he`s looking at the DeWalt job site 10" saw. He doesn`t have room for one of the big ones. Of the various ones in this range, which one do you think is the better one. I think I remember some magazine testing them awhile back, does anyone remember when that was? Thank You Larry

Re: Table saws

#3

Re: Table saws

Barry Irby

>Larry, I used the Dewalt saw on a remodel job I did for my cousin. It was a nice saw and very useful. I was not crazy about the fence. Thought it was pretty flimsy. Liked the saw in general though. Was sort of shocked when I found out they are $550 at Lowes. I guess I am out of touch, but I would have pegged the price closer to $350. (How's that for a mixed review? Liked it, but thought the fence was crappy and it was over priced.)

Re: Table saws

#4

PS.....

Barry Irby

>The one I used was not particularly portable. Set it up a sort trestle set of legs, but no wheels. I think what I am saying is that I have a Delta/Rockwell contractors saw that is almost forty years old and I added a Biesemeyer fence.There is no comparison. Mine has trunnions and hand wheels. The Dewalt has a locking lever and you release and just swing the blade to whatever angle and then lock it. It does have a hand wheel that raises and lowers the blade. I don't know what a saw like mine sell these days but if $300 or 400 would make up the difference I would give it serious thought. OTOH even without the wheels the Dewalt was more portable. If you want a jobsite saw, that might be important.

Five or more years ago, Rigid had a saw that was more like my contractors saw at Home Depot and it was about $600. A much better deal.

Re: Table saws

#5

Re: Table saws

George@Colonel's Workshop-Havertown PA

>Good Evening Larry,

We have two Ridgid tavble saws in the family. My #3 son Ken uses his professionally, and has done so for several years. Its used every day. My #1 son George also has one, bought with a very small shop area in mind. The Ridgid furnishes reliable power, very good rip capability, and fold-up mobility in one package. Adequate fence, also.

George

Re: Table saws

#6

Compare the DeWalt to the Bosch

Roy Anderson

>I'm in the market too. Both these saws look pretty good for the small shop. Between the two, they have comparable features and fold up easily. Specifically, I'm talking about the DeWalt DW 744XRS and the Bosch 4100-09. Go to Amazon dot com and look them up. There are good reviews, both pro and con, for both of them.

The Bosh rolling stand looks to be better, but the DeWalt has a built in table extension, while the Bosh requires that you buy a separate extension for big pieces. Both have had niggling little quality control problems. The Bosch is 599.99 and the DeWalt is 649.00, so they are essentially the same price. Neither will ever be a full size cabinet saw, but both look pretty good for a small shop.

I have to say I'm completely torn. I'd like to hear some other feedback.

Re: Table saws

#7

Re: Compare the DeWalt to the Bosch

Joanne in Pt. Pleasant, PA------WebKitFormBoundary

>I had a Bosch some years ago, when I thought I still needed to get the car into the garage (I know, Silly Girl!). It was dead accurate out of the box and cut most anything I fed it. And the stock blade it came with was excellent (although I did put a thin kerf Forrest on it). I had a stationary stand and then built a cabinet with storage drawers for it, so I cannot speak to the portable stand issue. I eventually upgraded to a PM contractor's saw (and of course, am wishing I had gone to a cabinet saw), but I loved the Bosch while I had it. I had looked at the DeWalt, too; I liked the rack & pinion fence. But for some reason, settled on the Bosch; sorry--can't remember why that was.

Re: Table saws

#8

Pop Wood did a review in their October issue.

Dave Bair, Eaton Rapids, MI

>Their top choice was the Bosch 4100.

Re: Table saws

#9

Re: Table saws

Larry in NW Ohio

>Dave Do you have the article? I have it some place, because I have Nov., or I gave it to someone. If you have it or someone else does, would someone mind sending me a copy. Thanks. Larry

Re: Table saws

#10

Re: Table saws

Dave Bair, Eaton Rapids, MI

>Trying to check the Pop Wood site, but it's been down a couple of days now.