Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Shop heat question - free standing radiator

Posts

Shop heat question - free standing radiator

#1

Shop heat question - free standing radiator

Stephen Kirk in Quakertown PA

>So, my current heater, an old kerosene stove, has about given up on me. I want to replace it with a good radiant style heater without an open flame (had the kerosene, but was always a bit wary of fire hazard). The free standing, electric, oil filled radiators look pretty good and seem to put out quite a bit of heat. Has anybody used one like this before? Do they work well? Do they hit the electric bill hard?

For reference, I'm in a 1 1/2 car garage, insulated but with a big door and concrete floors. Garage doesn't usually drop below about 40 deg on even the coldest of days. I'm comfortable working in a 60-65 deg shop, doesn't need to be in the 70s.

Re: Shop heat question - free standing radiator

#2

Re: Shop heat question - free standing radiator

steve mackay

>I got one of the oil filled, plug in radiators for my barracks room in germany one year. I was actually impressed with it. Did a good job. From then on it bounced back and forth with me through three tours. I could run extension cord out to a gaurd shack and be toasty during shifts also so its pretty rugged, transportable and GI proof. Really don't know if it could heat up a large shop though.

Re: Shop heat question - free standing radiator

#3

Re: Shop heat question - free standing radiator

Bill Earl

>The oil filled electrics heat a small room nicely. But I don't think it will be enough to heat your shop as you describe it.

The concrete floor is a huge heat-sink and you will probably lose a fair amount through the garage door too. You might be better off with an overhead radient heater to warm you up instead of the air.

Re: Shop heat question - free standing radiator

#4

Clint Searl

Re: Shop heat question - free standing radiator

Clint Searl

>I used a radiant propane reflective heater that screws to a 20# tank in my garage shop for many years. Very effective with a fan behind it and still works well. It's yours in exchange for a donation to WC.

Clint

Re: Shop heat question - free standing radiator

#5

Re: Shop heat question - free standing radiator

Frank Orfanello

>I've used those oil filled heaters and they ar not bad in the right situation. I don't think your situation is right. it's too big an area and too big a heat sink with your floor.

Re: Shop heat question - free standing radiator

#6

Re: Shop heat question - free standing radiator

Larry in NW Ohio

>Clint If Stephen doesn`t want it, let me know I may be interested. Thanjk You Larry

Re: Shop heat question - free standing radiator

#7

Re: Shop heat question - free standing radiator---

Stephen Kirk in Quakertown, Pa------WebKitFormBoun

>Hmmm, how long do you run on a tank?

------WebKitFormBoundaryz+kg+IE1vFbGcujX

Re: Shop heat question - free standing radiator

#8

Re: Shop heat question - free standing radiator

Ronald

>i use one they work great!!!

Re: Shop heat question - free standing radiator

#9

Yep, they are wonderful for that.

Michael Dresdner

>My shop is a two car garage, two big garage doors, concrete floor, minimal insulation. I have three oil filled electric heaters. They warm the place in about an hour, after which one is more than enough to keep it comfortable, and often I have to turn it off completely after a few hours. I can even spray, intermittently, and still keep warm enough.