Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Apprenticeship, cont'd

Posts

Apprenticeship, cont'd

#1

Apprenticeship, cont'd

Nathan

>My apprenticeship at the architectural woodworking shop is continuing apace. At this particular shop, so far, I've seen them making cabinets out of melamine and veneered particle board, painted cabinets out of MDF, doors and windows out of spruce, and a bunch of other stuff. Today I noticed they started machining some oak for a church-bell mounting and they are also building a big curved caul for making bent-lam shelving. I only go in two days a week so I don't see everything they do.

Now, I'm not directly involved in any of this stuff - except as a "fly on the wall". The owner is a master woodworker and a great guy - I'm really lucky. Like I mentioned before, he has me working at the bench with hand tools exclusively.

So far, I've learned how to:

- sharpen dovetail saws and frame saw blades by hand using triangular files

- grind, sharpen and hone chisels (freehand)

- grind, sharpen and hone plane irons (freehand)

- rip cut to a line using a frame saw

- cross cut to a pencil line using the dovetail saw, leaving the pencil line still visible after finishing the cut

- clean up frame saw rip cuts using a wood jointer plane

- cut mortises with standard chisels

- clean up roughsawn lumber using the jointer plane

- plane edges of boards straight and square (freehand)

Today he said the next topic is going to be joinery.

You'll notice he has me doing everything by hand and also freehand - so no tablesaw use, no honing guides, no shooting boards. For example, he had me do rip cuts with the frame saw for two days straight. Today I spent the entire day going back and forth between the bench and the sharpening station with the plane iron. Paradoxically, learning to sharpen and hone the iron itself was actually fairly easy once my teacher showed me the technique. What I really struggled with was the cap iron. It took me forever to get it ground to the correct angle (although I found that even with a substandard grind on the cap iron, the plane still cuts nicely as long as the main iron is sharp).

My teacher doesn't spend much time at my bench. He'll come up and give me an assignment (along with the materials and tools I need), briefly demonstrate the technique, and then let me struggle with it for hours and hours. A couple times a day he'll stop by and point out what I'm doing wrong.

The chisels and plane irons he gave me were all either really dull or improperly sharpened. Getting them working was a real learning experience for me. First I spent hours trying to joint a board with a dull iron. I planed it down to half its former width and made a huge pile of shavings but could never get it straight. I got pretty frustrated with that. Then my teacher finally came, took one swipe with the plane and said: hone the iron. So I did that and suddenly it became possible to joint the edge properly.

Sorry I can't really explain all the learning experiences I'm having there but anyone who has been through something similar knows what I'm talking about. What incredible luck to have this opportunity. After having spent years trying unsuccessfully to learn to work wood with machines, this is like coming out of a dark cave into broad daylight.

This week I ordered a real bench for my home shop. It should be delivered in late November or early December. I found a guy who makes them and he's going to deliver it in person and help me assemble it. He lacquers them as standard, but I went with unfinished and will finish myself with linseed oil. My teacher is not very eloquent and doesn't spend much time talking, but he did describe the shop where he did his apprenticeship many years ago. He said his teachers basically lived their entire lives at their bench, working 16-hour days, and did all their work by hand. Even though they didn't have any machines, he said, they were very productive. Today after I finally learned how to joint that board he said I'd need to do the same procedure a couple hundred times before I really mastered it.

Next week he said we're going to start joinery. The first joint he wants me to do is the bridle joint.

Re: Apprenticeship, cont'd

#2

Re: Apprenticeship, cont'd

Gerry In North Surrey

>It's a good thing that you are posting your experiences here, I, for one, am really enjoying reading about your quest for competence. Good on ya!

Gerry

Re: Apprenticeship, cont'd

#3

Re: Apprenticeship, cont'd

Fred Davis

>Your getting a really good approach to beginning woodworking.

Many never have learned to sharpen plane irons ,chisels, free hand properly and that is a necessary skill.

While your into sharpening and honing, if you haven't already, ask the teacher to teach you how to form a burr on a card scraper.

You will be glad you did.

FredD

Re: Apprenticeship, cont'd

#4

Re: Apprenticeship, cont'd

Larry in NW Ohio

>Nathan How I envy you. I sure wish it were me. You have quite a teacher there and I can tell you really appreciate your teacher and the way he is teaching you. I hope you have a long learning experiance with him, he has a lot to learn you and learn it all and then some. Best of luck and keep us informed. If you can learn everything you can from him, you`ll never be out of work. Larry

Re: Apprenticeship, cont'd

#5

Sharpening and burrs

Nathan

>Thanks to Gerry and Larry for the encouragement.

Fred: I read somewhere about forming a burr on a scraper. Isn't that done with one of those knife-sharpening steels? There's another tool I have in the shop but don't know how to use.

I completely agree about sharpening. Trying to do work with dull or improperly sharpened hand tools is sheer desperation.

Another comment - for the longest time I tried to learn woodworking on my own, and that resulted in a many "Rube Goldberg"-type contraptions in my shop, and many more in my head! Another thing this apprenticeship is teaching me is that all of the problems I was grappling with in the shop have long been solved by generations of woodworkers before me. I suppose some of that knowledge could be gained by reading books and magazines, but in the end, affiliating oneself with a craftsman and becoming receptive to him is far more effective. I learn more by working in my teacher's shop for one day than I did by 6 months of self study and trial-and-error alone in the shop.

Re: Apprenticeship, cont'd

#6

Re: Sharpening and burrs

Alex Grigoriev

>Knife sharpening steels look a bit similar to a burnisher, but they are actually coarse and work more as kind of file.

A scraper burnisher is a polished steel or (better) carbide rod. It deforms the scraper edge, creating a fine hook, rather than files it. A properly prepared scaper is a very useful tool.

Re: Apprenticeship, cont'd

#7

Re: Apprenticeship, cont'd

Barry Irby

>I, Like many others here would pay for that experience. Those who wouldn't pay for it probably need it the most. I envy your opportunity.

I have some old English books on joinery. There is one picture in one of them that says "the Danger in using Laminboard" and shows a piece that is split, with a fastener driven into the edge. I assumed laminboard was plywood. Is it something different? Can you explain?

Re: Apprenticeship, cont'd

#8

Re: Sharpening and burrs

Fred Davis

>Nathan,

I could show you in a few minutes , while telling you in a email is tedious at best.

Like Alex says , the scraper properly maintained is a very useful tool

To answer your question about what to turn the burr with , a knife steel isn't one of them.

A burnisher made for the job is a hard , round steel rod with a handle, in addition to that, you could use a screwdriver shank, a drift pin, a punch, or get lazy like me and use a handy jig , made by Lee Valley that lets you dial in a precise, repeatable angle of burr for coarse to fine cuts.

The scrapers themselves vary in size, thickness and hardness.

The harder ones while more difficult to get the burr just right , last a lot longer between tuneups.

For tuneups , you need a small flat bastard file, a oil stone, a burnisher and practice .

Let your teacher show you the routine.

Re: Apprenticeship, cont'd

#9

Re: Apprenticeship, cont'd

Fred Davis

>Barry, I am not famaliar with"Laminboard" but it reminded me of a product we used in the shop in Humbolt county ,ca when I lived there.

For a few years a mill made a product called Glueboard in the trade that was edge glued Redwood strips in 24" x 96" panels a half or 3/4" thick that we used for paint grade cabinets, dividers and so on . It was a dream to use.

This was in the sixties well before particle board became a item in shops and before Redwood was priced out of sight.

FredD

Re: Apprenticeship, cont'd

#10

Re: Apprenticeship, cont'd *LINK*

Nathan

>Hi Barry & Fred. I'm attaching a link to a picture of laminboard and I tried to attach the picture directly, too.

A year or so ago I asked here what the English word is. Nobody had ever heard of such a material. Recently I've been reading Joyce (Encyclopedia of Furniture Making) otherwise I still wouldn't know the right word.

So, yeah, laminboard is something different than plywood. Here in Europe it's readily available, but obviously not made out of redwood. The outer veneer can be something like poplar, or oak, or beech. The core strips are invariably a softwood like spruce. Here in the Czech Republic, spruce is plentiful and cheap, kind of like Southern Pine is in Florida.


img

Laminboard picture