Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

DJ 20 Jointer

Posts

DJ 20 Jointer

#1

DJ 20 Jointer

Fred Davis

>Yesterday, Overland Tool company of Lenexa,KS rolled into my shop a new DJ-20 8" Model 37-365X Jointer with a Shelix Helical Head upgrade.

This was made possible bu John Laubacher of Delta and Dan Bashaw of Overland Tool.

Dan furnished the machine out of inventory at no cost to me on John's authorization. Delta even paid shipping to my shop.

Total cost to me was 449.00 for the Helical Head and 67.50 for installation of it.

The machine's two year warranty is extended three years to five years by a promotion of Delta's.

I have posted this because in this day and age it is extremely unlikely to have a tool manufacturer go to the lengths Delta did to keep a long standing customer satisfied.

It is cost effective to patronize the companies that are willing to do this and makes any small initial savings one might make buying a lesser quality tool pale in comparison.

I have purchased Delta equipment since 1959 and never been disappointed.

Well worth thinking about on your next large outlay of money for tools.

FredD

Re: DJ 20 Jointer

#2

Re: DJ 20 Jointer

George@Colonel's Workshop-Havertown PA

>Enjoy it, Fred.

Had I enough room and money, I'd have gotten an 8 inch. I've sorta outgrown my Bridgewood 6 inch, good as it is. I hope you have abundant good luck with it.

George

Re: DJ 20 Jointer

#3

Re: DJ 20 Jointer

Chuck W

>Fred,

What led Delta to provide you a DJ-20 at no cost?

Re: DJ 20 Jointer

#4

Well, Colonel, you know

Joanne in Point Pleasant, PA

>you're always welcome to bring those wide boards up here to visit with me and "Frank". ;-)


img

Re: DJ 20 Jointer

#5

Re: DJ 20 Jointer

Fred Davis

>Well , not because I am good looking ;-))

I bought the machine new when I set up my current and last shop.

It worked just fine for some years, then the tables got out of Co-planar and started making rocking chair runners.

The only Millwright in the state that does the adjustment to the eccentrics located at each of the corners of both tables works for Overland Tool , in Lenexa.

I am a pretty good mechanic at maintaining machines like Jointers , but this was the first one that use the Parallel system instead of Dovetailed and gibbed ways.

After two trips to adjust the tables , about a year apart and at a total cost of 604.00, I started asking questions.

The Delta people and the Overland tool people came to the conclusion I had a Lemon , that would not get any better and probably had a internal problem not readily seen.

The eccentrics are locked in place with a bolt that bears against them , so presumably they can't move.

Long story short , this reasoning that the machine was defective when I bought it , was the impetus to replace it , not any special arrangement or relationship with Delta Per Se, other then being a customer of long standing.

I consider it my good luck that there are still responsible people in the industry that go the extra mile when they feel it to be the case.

FredD

Re: DJ 20 Jointer

#6

Thanks Joanne

George@Colonel's Workshop-Havertown PA

>Good Morning Joanne,

Wood it be okay if I didn't bring any wide boards? I'd love to come for a visit, just as soon as my light aircraft is airworthy. I know you have a runway at your place.

George

Re: DJ 20 Jointer

#7

Re: Thanks Joanne

Joanne in Point Pleasant, PA

>Any time! And I can usually rustle up some 'Vitamin Y' (Yuengling Lager or Black & Tan) to help quench your thirst from the journey here. ;-)

Re: DJ 20 Jointer

#8

Bart Goldberg

Stealth Gloat if there ever was one!

Bart Goldberg

>

Re: DJ 20 Jointer

#9

Bart Goldberg

Re: DJ 20 Jointer

Bart Goldberg

>Fred,

I have a DJ-20 that I upgraded with the Bryd Shelix cutter head. I love this tool. I also upgraded my Dewalt 13" planer with a spiral head as well once I saw how well it worked out for my jointer. Best money I ever spent on tools.

Bart

Re: DJ 20 Jointer

#10

Re: Stealth Gloat if there ever was one!

Joanne in Point Pleasant, PA

>Naah. 'Frank' is old news. I've had him a while. I just like to tease George with him. You are certainly welcome to come use him any time, if you have a board wider than your DJ-20. It's only 25-30 minutes from Flemington.

Re: DJ 20 Jointer

#11

Re: DJ 20 Jointer

Fred Davis

>Bart,

if I can find 1800 bucks I didn't know I had, I would seriously consider upgrading my Jet 20 inch planer to Shelix head.

For some reason unbeknownst to me ,my wife doesn't seem to exhibit the same level of interest.

Must be a Woman thing.

FredD